1. Introduzione e descrizione del prodottoview
The ApooDr 18000 BTU Mini Split Air Conditioner with Heat Pump is an advanced, energy-efficient system designed to provide optimal climate control for your space. Featuring inverter technology, it offers both powerful cooling and effective heating, suitable for areas up to 1000 sq ft. This system operates quietly and includes a comprehensive installation kit for convenience. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.

Figure 1.1: Complete ApooDr Mini Split Air Conditioner System with indoor unit, outdoor unit, remote, and installation accessories.
2. Contenuto della confezione
Upon unpacking, please verify that all components listed below are present and in good condition. If any items are missing or damaged, contact customer support immediately.
- Unità interna
- Unità esterna
- Backlit LCD Remote Control
- Pre-flared, Insulated Copper Line Set (approx. 16 FT)
- Cavi di comunicazione
- Installation Accessories (e.g., drain hose, wall sleeve)

Figure 2.1: Visual representation of the main components included in your order.
3. Configurazione e installazione
È necessaria un'installazione professionale for this mini split system to ensure proper function, safety, and warranty validity. Incorrect installation can lead to system malfunction, property damage, or personal injury.
3.1 Lista di controllo pre-installazione
- Ensure the installation area meets local building codes and regulations.
- Verify electrical supply (220V/60Hz) is compatible and sufficient.
- Confirm proper drainage for condensate.
- Ensure adequate clearance around both indoor and outdoor units for airflow and maintenance.
3.2 Passaggi di installazione (oltreview)
While professional installation is mandatory, a general overview del processo comprende:
- Mounting the indoor unit on the wall.
- Installing the outdoor unit on a stable, level surface.
- Connecting the pre-flared copper line set between the indoor and outdoor units.
- Connecting electrical wiring and communication cables.
- Vacuuming the refrigerant lines to remove air and moisture.
- Checking for leaks and performing a test run.
Per istruzioni di installazione dettagliate e passo dopo passo, fare riferimento al sito ufficiale Manuale di installazione (PDF).

Figura 3.1: Esample of a professionally installed ApooDr Mini Split System.
4. Modalità operative
The ApooDr Mini Split system offers five distinct operating modes to ensure your comfort in various conditions. All modes are easily accessible and controllable via the included backlit LCD remote.
4.1 Modalità disponibili
- Modalità automatica: The system automatically selects the appropriate operating mode (Cool, Heat, or Fan) based on the set temperature and current room temperature.
- Modalità fredda: Provides cooling to lower the room temperature. Adjustable from 62℉ (16.7℃) to 90℉ (32.2℃).
- Modalità di asciugatura (deumidificazione): Riduce l'umidità nella stanza senza variazioni significative della temperatura.
- Modalità di calore: Provides heating to raise the room temperature. Adjustable from 32℉ (0℃) to 86℉ (30℃).
- Modalità ventola: Fa circolare l'aria senza riscaldare o raffreddare. La velocità della ventola è regolabile.
4.2 Funzioni del telecomando
The backlit LCD remote allows you to:
- Accendere/spegnere l'unità.
- Selezionare le modalità operative.
- Regolare le impostazioni della temperatura.
- Controlla la velocità della ventola.
- Set timer functions (Timer ON/OFF).
- Activate Sleep mode for quiet operation and energy saving.
- Control oscillation (swing) of the air deflector.
- Access special features like Turbo, Clean, LED display control, and Follow Me function.

Figure 4.1: The ApooDr Mini Split system offers 5 versatile operating modes for year-round comfort.

Figure 4.2: The intuitive backlit LCD remote control for easy system management.
5. Manutenzione
Regular maintenance ensures the longevity and efficient operation of your ApooDr Mini Split system. Always turn off the power to the unit before performing any maintenance.
5.1 Pulizia del filtro dell'aria
The indoor unit is equipped with a permanently washable and easy-to-clean air filter. Regular cleaning of the air filter is crucial for maintaining air quality and system efficiency.
- Frequenza: Pulire il filtro ogni due settimane o più frequentemente, a seconda dell'utilizzo e della qualità dell'aria.
- Passaggi:
- Aprire il pannello frontale dell'unità interna.
- Rimuovere delicatamente il/i filtro/i dell'aria.
- Wash the filter(s) with lukewarm water and a mild detergent.
- Rinse thoroughly and allow to air dry completely before re-installing. Do not expose to direct sunlight.
- Re-install the dry filter(s) and close the front panel.
5.2 Manutenzione dell'unità esterna
Periodically inspect the outdoor unit for any obstructions (leaves, debris) around the condenser coils and fan. Gently clear any blockages to ensure proper airflow. Professional cleaning of the outdoor coil may be required annually.
6. Risoluzione Dei Problemi
If you encounter issues with your ApooDr Mini Split system, please refer to the official Guida alla risoluzione dei problemi (PDF) per soluzioni dettagliate. Di seguito sono riportati alcuni problemi comuni e consigli generali:
6.1 Problemi comuni e soluzioni
- L'unità non si accende: Controllare l'alimentazione, l'interruttore automatico e assicurarsi che le batterie del telecomando non siano scariche.
- Raffreddamento/riscaldamento insufficiente: Verify correct mode selection and temperature setting. Clean air filters. Ensure no obstructions to airflow. Check for ice on the outdoor unit (in heating mode, during defrost cycle).
- Rumori insoliti: Minor noises during operation are normal. Excessive or unusual noises may indicate a problem; consult the troubleshooting guide or a professional.
- Perdita d'acqua dall'unità interna: Check the condensate drain line for blockages or improper slope.
If problems persist after consulting the troubleshooting guide, contact a qualified HVAC technician or ApooDr customer support.
7. Specifiche
Key technical specifications for the ApooDr 18000 BTU Mini Split Air Conditioner (Model: ASF16-18H2B):
| Caratteristica | Specificazione |
|---|---|
| Capacità di raffreddamento | Potenza nominale: 18000 BTU |
| Capacità di riscaldamento | Potenza nominale: 18000 BTU |
| SEER2 (Indice di efficienza energetica stagionale 2) | 18.3 |
| HSPF2 (fattore di prestazione stagionale del riscaldamento 2) | 8.70 |
| Voltage | 208/230V / 60Hz |
| Area di copertura | Fino a 1000 piedi quadrati |
| Livello di rumore (interno) | 30 dB |
| Tipo di refrigerante | Pre-Charged R-410A |
| Indoor Working Temperature (Cooling) | 62℉ ~ 90℉ (16.7℃ ~ 32.2℃) |
| Indoor Working Temperature (Heating) | 32℉ ~ 86℉ (0℃ ~ 30℃) |
| Outdoor Working Temperature (Cooling) | 5 ℉ ~ 122 ℉ (-15 ℃ ~ 50 ℃) |
| Outdoor Working Temperature (Heating) | 5 ℉ ~ 86 ℉ (-15 ℃ ~ 30 ℃) |
| Certificazioni | AHRI Certified & UL Certified |
8. Garanzia e supporto
8.1 Garanzia del prodotto
The ApooDr Mini Split Air Conditioner comes with the following warranty coverage:
- Compressore: Garanzia di 5 anno
- Parti: Garanzia di 2 anno
Please retain your proof of purchase for warranty claims. The warranty is valid only with professional installation.
8.2 Assistenza clienti
For any questions, technical assistance, or warranty claims, please contact ApooDr customer support. Refer to the contact information provided with your product packaging or visit the official ApooDr websito per i dettagli del supporto.