TEAMGROUP T-Force Delta RGB DDR5 Memory Module User Manual

1. Introduzione

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your TEAMGROUP T-Force Delta RGB DDR5 32GB (2x16GB) 6400MHz Desktop Memory Module. This high-performance DDR5 memory kit is designed to deliver enhanced speed and stability for compatible systems, featuring vibrant RGB lighting and support for Intel XMP3.0 for optimized performance. It is compatible with Intel 600 Series Chipsets and newer platforms supporting DDR5 memory.

This image displays two individual TEAMGROUP T-Force Delta RGB DDR5 memory modules. Each module features a black heat spreader with the T-Force logo and 'DELTA' branding, accented by a translucent top bar that illuminates with RGB lighting.

2. Configurazione e installazione

Proper installation of your memory modules is crucial for system stability and performance. Please follow these steps carefully:

1. Preparazione: Before beginning, ensure your computer is powered off and unplugged from the wall outlet. Discharge any static electricity by touching a grounded metal object, such as the computer case.
2. Caso aperto: Aprire il case del computer per accedere alla scheda madre.
3. Individuare gli slot DIMM: Identify the DDR5 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory (typically slots 2 and 4, or 1 and 3, counting from the CPU).
4. Clip di ritenzione aperte: Gently push open the white or black retention clips at both ends of the selected DIMM slots.
5. Insert Memory Module: Align the notch on the bottom edge of the memory module with the key in the DIMM slot. Apply even pressure to both ends of the module until it clicks into place and the retention clips automatically close. Do not force the module if it does not fit; recheck the alignment.
6. Verifica installazione: Ensure both retention clips are fully closed and the module is seated firmly and evenly in the slot.
7. Repeat for Second Module: Install the second memory module into the corresponding dual-channel slot following the same procedure.
8. Chiudere la custodia e accendere: Close your computer case, plug in the power cable, and power on your system.

This image shows a single TEAMGROUP T-Force Delta RGB DDR5 memory module securely installed in a motherboard's DIMM slot. The module's translucent top bar is illuminated with a gradient of blue and purple RGB lighting, highlighting its aesthetic design.

3. Operating and Configuration

3.1 Enabling XMP3.0

To achieve the rated 6400MHz speed, you must enable Intel XMP3.0 (Extreme Memory Profile) in your motherboard's BIOS/UEFI settings. This is a one-click overclocking feature that configures the memory to its optimal speed and timings.

1. Accesso al BIOS/UEFI: Restart your computer and repeatedly press the designated key (usually Del, F2, F10, or F12) during startup to enter the BIOS/UEFI setup.
2. Locate XMP Setting: Navigate to the 'Overclocking', 'Memory Settings', or 'AI Tweaker' section. Look for an option labeled 'XMP', 'DOCP', or 'EXPO' (for AMD platforms, though this module is optimized for Intel).
3. Enable Profile: Select the XMP3.0 profile (often labeled 'Profile 1' or similar) and enable it.
4. Salva ed esci: Save the changes and exit the BIOS/UEFI. Your system will restart with the memory running at its advertised speed.

3.2 Controllo dell'illuminazione RGB

The T-Force Delta RGB DDR5 modules feature 120-degree ultra-wide RGB lighting. You can customize the lighting effects using your motherboard's RGB synchronization software.

• Install the appropriate RGB software for your motherboard (e.g., ASRock Polychrome Sync, ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync).
• Launch the software and select the memory modules to customize their lighting patterns, colors, and synchronization with other RGB components in your system.

This image illustrates the compatibility of the memory modules with popular motherboard RGB synchronization software, allowing users to control and customize the lighting effects across their system. Supported software includes ASRock Polychrome Sync, ASUS Aura Sync, GIGABYTE RGB Fusion, and MSI Mystic Light Sync.

This image features four TEAMGROUP T-Force Delta RGB DDR5 memory modules installed side-by-side in a motherboard. The modules' RGB lighting cycles through a rainbow spectrum, showcasing the wide range of customizable lighting effects.

4. Manutenzione

TEAMGROUP T-Force Delta RGB DDR5 memory modules are designed for durability and reliability. Minimal maintenance is required.

• Mantenere pulito: Periodically clean your computer's interior to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• Garantire il flusso d'aria: Maintain good airflow within your computer case to help dissipate heat from the memory modules, especially during prolonged high-performance operation.
• Evitare danni fisici: Handle memory modules by their edges to avoid touching the gold contacts or integrated circuits. Store unused modules in anti-static bags.

5. Risoluzione Dei Problemi

Se riscontri problemi con i moduli di memoria, prendi in considerazione i seguenti passaggi per la risoluzione dei problemi:

• Il sistema non si avvia/nessuna visualizzazione:
  • Ensure the memory modules are fully seated in their DIMM slots. Re-seat them by gently pushing down until the clips lock.
  • Verify that the modules are installed in the correct slots for dual-channel operation as specified by your motherboard manual.
  • If using multiple modules, try booting with only one module at a time to identify a potentially faulty stick or slot.
• Rilevata velocità di memoria non corretta:
  • Access your BIOS/UEFI settings and confirm that Intel XMP3.0 is enabled. If not, enable it and save changes.
  • Ensure your motherboard BIOS/UEFI is updated to the latest version, as this can improve memory compatibility and stability.
• Instabilità/arresti anomali del sistema:
  • If XMP is enabled, try disabling it to see if the system stabilizes. This can help determine if the issue is related to the overclocked profile o altri componenti.
  • Run a memory diagnostic tool (e.g., Windows Memory Diagnostic, MemTest86) to check for errors in the memory modules.
• Illuminazione RGB non funzionante/non sincronizzata:
  • Ensure the motherboard's RGB software is correctly installed and up-to-date.
  • Check for any conflicts with other RGB control software.
  • Verify that the RGB headers on the motherboard are properly connected (though these modules typically draw power and RGB control directly from the DIMM slot).

6. Specifiche

7. Garanzia e supporto

TEAMGROUP products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the official TEAMGROUP websito o la documentazione inclusa con l'acquisto.

7.1 Supporto tecnico

For technical assistance, troubleshooting, or product inquiries, please visit the official TEAMGROUP support channels:

• Negozio ufficiale del marchio: Visit the TEAMGROUP Store on Amazon
• Guida per l'utente (PDF): Scarica la Guida per l'utente (PDF)
• For additional support, please visit the TEAMGROUP official website and navigate to their support section.