Introduzione
The Keychron Q7 is a wired custom mechanical keyboard featuring a 70% layout, designed for versatility and performance. It supports QMK/VIA for extensive customization, includes hot-swappable Gateron G Pro Red switches, and is built with a double-gasket design for an enhanced typing experience. This manual provides instructions for setup, operation, maintenance, and troubleshooting.
Image: The Keychron Q7 Custom Mechanical Keyboard, showcasing its compact 70% layout and aluminum build.
Contenuto della confezione
Verify that all items listed below are included in your Keychron Q7 package:
Image: Diagram illustrating the Keychron Q7 keyboard and its accompanying accessories.
- Tastiera: 1x Fully Assembled Keychron Q7 Keyboard (includes Aluminum Case, PCB, Steel Plate, Sound Absorbing Foam, Case Foam, 10 Gaskets (6 installed, 4 in box))
- Componenti: 5 sets x Stabilizers, 1 set x Double-Shot PBT Keycaps, 1 set x Gateron G Pro Switches
- cavi: 1x Type-C to Type-C Cable, 1x Type-A to Type-C Adapter
- Utensili: 1x Switch Puller, 1x Keycap Puller, 1x Screwdriver, 1x Hex Key
Note: All tools are located at the bottom of the box.
Impostare
1. Collegamento della tastiera
- Locate the USB-C port on the back of the Keychron Q7 keyboard.
- Connect one end of the provided Type-C to Type-C cable to the keyboard.
- Connect the other end of the cable to your computer's USB-C port. If your computer only has USB-A ports, use the included Type-A to Type-C adapter.
- La tastiera dovrebbe essere riconosciuta automaticamente dal sistema operativo.
2. Switching Operating System Layout
The Keychron Q7 features a physical switch to toggle between Windows and macOS layouts. This ensures proper key mapping for your specific operating system.
Immagine: Lato view of the Keychron Q7, showing the physical switch to select between Windows and macOS modes.
- Locate the switch on the side of the keyboard, near the USB-C port.
- Slide the switch to the 'Win' position for Windows/Linux systems.
- Slide the switch to the 'Mac' position for macOS systems.
Istruzioni per l'uso
QMK and VIA Customization
The Keychron Q7 fully supports QMK and VIA open-source firmware, allowing for extensive customization of key assignments, macros, and backlighting. This functionality is compatible with Mac, Windows, and Linux operating systems.
- To customize your keyboard, download the Keychron Launcher Web App or the VIA software from the official Keychron websito.
- The software provides a graphical interface to remap keys, create complex macros, and adjust RGB lighting effects.
- For detailed instructions on using QMK/VIA, refer to the documentation available on the Keychron support page or the QMK/VIA official websiti.
Image: Keychron Launcher Web App interface for key remapping and macro programming.
Interruttori sostituibili a caldo
The Q7 features a hot-swappable design, allowing you to change switches without soldering. It supports both 3-pin and 5-pin MX-style mechanical switches.
Image: Keyboard PCB with keycaps removed, showing hot-swappable switch sockets and various switch types.
- Rimozione di un interruttore: Use the included switch puller tool. Gently grip the switch from the top and bottom, then pull straight up with even pressure until the switch detaches from the PCB.
- Installazione di uno switch: Align the pins of the new switch with the holes on the PCB. Ensure the switch is oriented correctly. Gently press the switch down until it clicks into place. Do not force the switch, as this can bend the pins.
Tasti PBT Double-Shot
The Q7 comes with durable double-shot PBT keycaps. These keycaps are resistant to shine and wear, ensuring legends remain clear over time.
Image: Close-up of the keyboard's double-shot PBT keycaps.
South-Facing RGB Backlighting
The keyboard features south-facing RGB LEDs, which provide even backlighting and are ideal for compatibility with most custom keycap sets.
Image: Illuminated south-facing RGB switches on the Keychron Q7 keyboard.
Manutenzione
Pulizia della tastiera
- Scollegare la tastiera dal computer prima di pulirla.
- Utilizzare un panno morbido e privo di lanugine leggermente dampPulire i tasti e la custodia con acqua o una soluzione detergente delicata. Evitare l'eccessiva umidità.
- Per la pulizia tra i tasti, utilizzare aria compressa per rimuovere polvere e detriti.
- For deeper cleaning, you may remove keycaps using the included keycap puller. Clean the keycaps separately with water and mild soap, then ensure they are completely dry before reattaching.
Cura degli interruttori e dei tasti
- When removing or installing switches, apply gentle, even pressure to avoid bending switch pins or damaging the PCB sockets.
- Store spare switches and keycaps in a clean, dry place to prevent dust accumulation or damage.
Risoluzione dei problemi
If you encounter issues with your Keychron Q7 keyboard, refer to the following common troubleshooting steps:
- La tastiera non risponde:
- Assicurati che il cavo USB-C sia collegato saldamente sia alla tastiera che al computer.
- Prova a collegare la tastiera a una porta USB diversa del computer.
- Verify that the operating system switch (Mac/Win) on the side of the keyboard is set correctly for your system.
- Prova la tastiera su un altro computer per escludere un problema specifico del computer.
- Chiavi non registrate:
- Carefully remove the keycap and switch for the non-functioning key using the provided tools.
- Ispezionare i pin dell'interruttore per verificare che non siano piegati o danneggiati. Raddrizzare delicatamente i pin piegati con una pinzetta, se possibile.
- Reinsert the switch firmly into the PCB socket. If the issue persists, try swapping it with a known working switch.
- Problemi di illuminazione RGB:
- Check the Keychron Launcher Web App or VIA software to ensure lighting settings are configured as desired.
- Ensure no software conflicts are interfering with the lighting control.
- Aggiornamento del firmware: If experiencing persistent issues, check the official Keychron website for any available firmware updates for the Q7 model. Follow the provided instructions carefully for firmware updates.
For further assistance, please visit the official Keychron support page.
Specifiche
Immagine: Esploso view of the Keychron Q7 keyboard's internal components.
| Caratteristica | Dettaglio |
|---|---|
| Modello | Chiavetta Q7 |
| Disposizione | Disposizione del 70% |
| Connettività | Cablato (USB-C) |
| Tipo di interruttore | Hot-swappable Gateron G Pro Red Switch |
| Operating Force (Gateron G Pro Red) | 45±15 gf |
| Pre-travel (Gateron G Pro Red) | 2 ± 0.6 mm |
| Travel Distance (Gateron G Pro Red) | 4 ± 0.6 mm |
| Switch Behavior (Gateron G Pro Red) | Lineare |
| Pre-lubed (Gateron G Pro Red) | SÌ |
| Sound Level (Gateron G Pro Red) | Tranquillo |
| keycaps | PBT a doppio colpo |
| Retroilluminazione | RGB esposto a sud |
| Materiale del telaio | Alluminio |
| Stile di montaggio | Double Gasket Design |
| Supporto firmware | QMK/VIA programmabile |
| Sistema operativo compatibile | Mac, Windows, Linux |
| Dimensioni del prodotto | 13.44 x 4.76 x 1.33 pollici |
| Peso dell'articolo | 5.17 libbre |
Image: Detailed specifications for the Gateron G Pro Red switches.
Garanzia e supporto
Keychron products are designed for quality and durability. For information regarding warranty coverage, technical support, or to access additional resources such as firmware updates and software downloads, please visit the official Keychron websito o nelle pagine di supporto dedicate.
You can find more information and contact support through the Keychron Brand Store on Amazon.
