1. Informazioni sulla sicurezza
Si prega di leggere attentamente tutte le istruzioni prima di montare e utilizzare il prodotto. Il mancato rispetto di queste istruzioni può causare lesioni o danni al prodotto.
- Capacità di peso: Each shelf has a maximum load capacity of 265 kg (evenly distributed). Do not exceed this limit.
- Assemblaggio corretto: Ensure all components are securely fitted and hammered into place during assembly. A rubber mallet (not included) is recommended for secure connections.
- Stabilità: For enhanced stability and safety, especially in areas with children or pets, it is highly recommended to secure the shelving unit to a wall using an anti-tip kit (not included).
- Posizionamento: Place the unit on a flat, stable, and level surface. Avoid placing it in high-traffic areas where it could be easily bumped.
- Bordi taglienti: While edges are designed to be smooth, wear protective gloves during assembly to prevent cuts or pinches.
- Bambini: Do not allow children to climb on or play with the shelving unit.
2. Elenco delle parti
Prima di iniziare il montaggio, verificare che tutti i componenti siano presenti e integri. Se qualche componente risulta mancante o danneggiato, contattare l'assistenza clienti.
| Articolo | Descrizione | Quantità |
|---|---|---|
| Vertical Posts (Long) | Main support beams for height | 8 |
| Horizontal Beams (Long) | Front and back supports for shelves | 10 |
| Horizontal Beams (Short) | Side supports for shelves | 10 |
| MDF Boards | Shelf surfaces | 5 |
| Protezioni angolari | Plastic caps for post ends | 16 |
| Piastre di accoppiamento | Connects vertical posts for full height | 4 |
| Guanti | For hand protection during assembly | 1 paio |
| Maglio di gomma | Recommended for secure assembly (not included) | 1 |

Immagine: Oltreview of all parts included for the Yaheetech 5-Tier Steel Rack assembly.
3. Installazione e assemblaggio
Follow these steps carefully to assemble your Yaheetech 5-Tier Steel Storage Rack. It is recommended to wear the provided gloves during assembly.
Fase 1: assemblare il telaio di base
- Attach the corner protectors to the bottom ends of four long vertical posts. Ensure the large opening faces up and the small opening faces down.
- Connect two long horizontal beams and two short horizontal beams to form a rectangular base. Use a rubber mallet to gently tap the connections until they are secure. Ensure the wider side of the beams faces upwards.
Video: Demonstrates the initial steps of assembling the base frame and attaching the vertical posts.
Step 2: Install the First Shelf
- Place one MDF board onto the assembled base frame. Ensure it sits flush within the frame.
Step 3: Extend Vertical Posts and Add Middle Shelves
- Attach the remaining vertical posts to the top of the existing posts using the coupling plates. Tap gently with a rubber mallet to secure.
- Repeat the process of creating horizontal frames (two long, two short beams) and placing MDF boards for the middle shelves. Ensure the wider side of the beams faces upwards and connections are secure.
Video: Shows the process of extending the vertical posts and adding subsequent shelves.
Step 4: Complete the Top Section
- Assemble the final horizontal frame for the top shelf.
- Place the last MDF board onto the top frame.
- Install the remaining corner protectors on the very top ends of the vertical posts.

Image: Illustrates the flexibility of the rack, allowing for adjustable shelf heights and conversion into two smaller units.
4. Istruzioni per l'uso
Your Yaheetech Steel Storage Rack is designed for versatile storage. Here are some guidelines for optimal use:
- Caricamento degli articoli: Distribute weight evenly across each shelf to maintain stability and prevent warping. Place heavier items on lower shelves.
- Regolazione dell'altezza del ripiano: The shelves are adjustable. To change a shelf's height, carefully remove the items, then use a rubber mallet to gently tap the horizontal beams upwards to disengage them from the vertical posts. Reattach them at the desired height and tap firmly to secure.
- Riconfigurazione: The rack can be separated into two smaller, independent units (e.g., two 2-tier or 3-tier units) by using the coupling plates to create new top sections.
- Utilizzo versatile: This rack is suitable for various environments such as kitchens, garages, warehouses, basements, workshops, offices, bedrooms, and living rooms.

Image: The rack organized with various household items in a living room.
5. Manutenzione e cura
To ensure the longevity and appearance of your steel storage rack, follow these maintenance tips:
- Pulizia: Wipe down the steel frame and MDF boards with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the coating.
- Prevenzione della ruggine: The rack features a rust-resistant coating. To maintain this, avoid prolonged exposure to excessive moisture. Promptly wipe away any spills.
- Ispezione: Periodically check all connections to ensure they remain secure. Re-tap with a rubber mallet if any looseness is detected.
- Evitare graffi: The smooth edges help prevent scratches, but avoid dragging sharp or heavy objects across the frame or shelves.
6. Risoluzione Dei Problemi
Se si riscontrano problemi durante il montaggio o l'uso, fare riferimento alle seguenti soluzioni comuni:
- Scaffale traballante: Ensure all horizontal beams are fully seated into the keyhole slots on the vertical posts. Use a rubber mallet to firmly tap all connections until they are flush and secure. Check that the unit is on a level surface.
- Difficoltà di montaggio: If parts are difficult to fit, ensure they are oriented correctly (e.g., wider side of beams facing up). A rubber mallet is essential for securing the screwless connections. Do not force parts; re-check alignment.
- Odore forte: Some users have reported an initial odor from the MDF boards. This is typically temporary. Ensure good ventilation in the area where the rack is assembled for a few days.
- MDF Board Not Fitting: Ensure the horizontal beams are correctly installed and fully seated. The MDF board should rest securely on the inner lip of the beams.
7. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Prodotti |
| Numero di modello | 610818 Blu |
| Dimensioni del prodotto | 90 x 45 x 180 cm (larghezza x profondità x altezza) |
| Peso del prodotto | 22.8 kg |
| Colore | Blu |
| Materiale | Stainless Steel, Alloy Steel, Metal, MDF Board |
| Tipo di ripiano | 5 Tiers |
| Capacità di carico per ripiano | 265 kg (evenly distributed) |
| Caratteristiche speciali | Durable, Lightweight, Non-slip, Large Capacity, Comfortable, Sturdy, High Quality, Rust-proof |

Image: Detailed dimensions and load capacity of the 5-tier rack.

Image: Highlights key features like high-quality MDF, non-slip feet, and the screwless assembly design.
8. Garanzia e supporto
For warranty information or customer support, please refer to the documentation included with your product or contact Yaheetech customer service directly. Details are typically available on the manufacturer's official websito o tramite il tuo punto vendita.
- Produttore: Prodotti
- Venditore: YaheetechJP
- Negozio online: Yaheetech Store on Amazon.co.jp






