Introduzione
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-7000 MK2 Professional Upper Torque Turntable System. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.
Istruzioni di sicurezza
- Ensure the turntable is placed on a stable, level surface away from direct sunlight, heat sources, and excessive moisture.
- Non esporre l'unità alla pioggia o all'umidità per evitare incendi o scosse elettriche.
- Always disconnect the power cord from the outlet before cleaning or performing any maintenance.
- Non tentare di riparare l'unità da soli. Per qualsiasi intervento di manutenzione, rivolgersi a personale qualificato.
- Tenere fuori dalla portata dei bambini.
Contenuto della confezione
Your Reloop RP-7000 MK2 Professional Upper Torque Turntable System package should include the following items:
- 2 x Reloop RP-7000 MK2 Professional Upper Torque Turntable System
- 2 x Reloop Dust Cover for RP-7000/8000
- Knox Gear Vinyl Record Care System (includes brush, velvet cleaner, stylus brush, and cleaning solution)
- Cavi di alimentazione
- Cavi RCA
- Contrappesi
- Slipmats
- Manuale d'uso
Image: The complete bundle including two Reloop RP-7000 MK2 turntables, two dust covers, and the Knox Gear vinyl record care solution.
Impostare
1. Disimballaggio e posizionamento
Carefully remove all components from the packaging. Place the turntable on a flat, stable surface. Ensure there is adequate space around the unit for ventilation and cable connections.
Immagine: Un angolo view of the Reloop RP-7000 MK2 turntable, highlighting its main components.
2. Attaching the Dust Cover
Gently place the dust cover onto the turntable. The dust cover helps protect the platter and tonearm from dust and debris when the turntable is not in use.
Image: The Reloop RP-7000 MK2 turntable with its protective dust cover in place.
3. Collegamento dei cavi audio
Connect the RCA cables from the turntable's output to the appropriate input on your mixer or amplifier. Ensure the ground wire is also connected to prevent hum.
Image: Rear panel of the Reloop RP-7000 MK2, displaying the RCA audio outputs, ground terminal, and power connection.
4. Collegamento elettrico
Connect the power cable to the turntable and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.
Istruzioni per l'uso
1. Accensione e spegnimento
To power on the turntable, flip the power switch located on the front left side to the ON position. To power off, flip the switch back to OFF.
Immagine: dall'alto view of the Reloop RP-7000 MK2 turntable, illustrating the arrangement of its controls and components.
2. Riproduzione di un disco
- Metti un disco sul piatto.
- Select the appropriate speed (33, 45, or 78 RPM) using the speed buttons.
- Premere il tasto AVVIO/ARRESTO pulsante per avviare la rotazione del piatto.
- Carefully lower the tonearm onto the record using the cue lever.
Image: The Reloop RP-7000 MK2 turntable with a record playing, demonstrating the tonearm's position.
3. Pitch Control and Reverse Function
Use the pitch fader to adjust the playback speed. The INVERSIONE button allows for reverse playback of the record.
Manutenzione
1. Pulizia del giradischi
Regularly wipe the turntable's surface with a soft, dry cloth. For the dust cover, use a slightly damp cloth and avoid abrasive cleaners. The included Knox Gear Vinyl Record Care System can be used for cleaning records and the stylus.
Image: The Knox Gear Vinyl Record Care System, showing the velvet record brush, stylus brush, and cleaning solution bottle.
2. Cura dello stilo
Gently clean the stylus using the provided stylus brush. Always brush from back to front. A dirty stylus can degrade sound quality and damage records.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessun potere | Cavo di alimentazione non collegato; presa di corrente difettosa | Controllare il collegamento del cavo di alimentazione; provare una presa diversa |
| Nessun suono | Cavi RCA non collegati; Amplifier/mixer input incorrect; Stylus damaged | Check RCA connections; Select correct input on amplifier/mixer; Inspect and replace stylus if necessary |
| Rumore di ronzio | Filo di terra non collegato; interferenza | Ensure ground wire is securely connected; Move turntable away from other electronic devices |
| Velocità di riproduzione errata | Wrong speed selected; Pitch fader not centered | Select correct RPM; Adjust pitch fader to center position |
Specifiche
- Marca: Rifare il loop
- Modello: RP-7000MK2
- Tecnologia di connettività: Cablato
- Caratteristiche speciali: Balanced S-shaped Tone Arm, Dual Start/Stop Buttons, Precise Motor Control, Reverse Function, Freely Movable Aluminum LED Target Light
- Materiale: Plastica
- Peso dell'articolo: 4.5 Kilograms (per turntable)
- Colore: Deep black or classic silver metallic
- Dispositivi compatibili: Altoparlante, cuffia
Garanzia e supporto
Reloop products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Reloop webo contattare il distributore locale. Conservare la prova d'acquisto per eventuali reclami in garanzia.
Per ulteriore assistenza, visitare il Negozio Reloop su Amazon.
