1. Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Antec NX700 Mid-Tower ATX Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage.
Figure 1: Antec NX700 Mid-Tower ATX Gaming Case overview.
Caratteristiche principali
- 3D Geometric Mesh Front Panel: Designed for optimal airflow and aesthetic appeal.
- Included ARGB Fans: Comes with two 185mm ARGB fans in the front and one 120mm ARGB fan in the rear for effective cooling and customizable lighting.
- Pannello laterale in vetro temperato: A 4mm thick tempered glass side panel provides a clear view dei tuoi componenti interni.
- Extensive Radiator Support: Supports up to a 360mm radiator for advanced liquid cooling solutions.
- Versatile I/O Panel: Features Power, LED control button, Reset, 2 x USB 3.0 ports, and MIC/HD-AUDIO jacks.
- Compatibilità della scheda madre: Supporta schede madri ATX, Micro-ATX e Mini-ITX.
Figure 2: Close-up of the 3D geometric mesh front panel, designed for enhanced airflow.
2. Configurazione e installazione
Follow these steps to install your components into the Antec NX700 case.
2.1 Included Fans Installation
The case comes pre-installed with two 185mm ARGB fans at the front and one 120mm ARGB fan at the rear. Ensure these fans are properly connected to your motherboard or a fan controller for power and ARGB functionality.
Figure 3: Illustration of the included 2 x 185mm ARGB front fans and 1 x 120mm ARGB rear fan.
2.2 Configurazione del sistema di raffreddamento
The NX700 supports various fan and radiator configurations to optimize cooling performance.
- Davanti: Supports 3 x 120mm, 3 x 140mm, or 2 x 185mm fans. Radiator support up to 360mm.
- Superiore: Supports 2 x 120mm or 2 x 140mm fans. Radiator support up to 280mm.
- Posteriore: Supports 1 x 120mm or 1 x 140mm fan. Radiator support up to 140mm.
- Copertura dell'alimentatore: Supporta 2 ventole da 120 mm.
Figure 4: Diagram illustrating fan and radiator mounting options within the case.
Figure 5: Illustration showing space for a 360mm radiator installation at the front, even with 185mm fans.
2.3 Installazione dei componenti
The NX700 offers ample space for various components. Ensure all cables are routed neatly for optimal airflow and aesthetics.
- Scheda madre: Supports ATX motherboards (up to 305mm x 275mm).
- Dissipatore CPU: Altezza massima 170 mm.
- Scheda grafica (GPU): Lunghezza massima di 340 mm.
- Alimentazione elettrica (PSU): Supports PSUs up to 200mm (with HDD) or 365mm (without HDD).
- Magazzinaggio: 2 x 3.5" HDD / 2.5" SSD (convertible) and 4 x 2.5" SSDs.
Figure 6: Internal layout showing maximum dimensions for CPU cooler, GPU, and motherboard support.
Figura 7: Un interno view of the NX700 case with various components installed, demonstrating space and layout.
2.4 Video Guide for Assembly
Watch this official video for a visual guide on the Antec NX700 Mid-Tower ATX Gaming Case features and assembly process.
Video 1: Fine ufficialeview and assembly guide for the Antec NX700 Mid-Tower ATX Gaming Case.
3. Istruzioni per l'uso
3.1 Funzioni del pannello I/O
The top I/O panel provides convenient access to essential controls and ports.
- Pulsante di accensione: Accende o spegne il sistema.
- Pulsante di controllo LED: Cycles through various ARGB lighting modes for the included fans.
- Pulsante di reset: Riavvia il sistema.
- Porte USB 3.0 (x2): Per il trasferimento dati ad alta velocità.
- MIC/HD-AUDIO Jacks: Per collegare cuffie e microfoni.
Figura 8: dettagliata view of the top I/O panel with power, LED control, USB 3.0, and audio ports.
3.2 Controllo della ventola ARGB
The included ARGB fans can be controlled either via the dedicated LED button on the I/O panel or synchronized with your motherboard's ARGB software.
- Using the LED Control Button: Press the LED button on the I/O panel to cycle through pre-programmed lighting effects.
- Sincronizzazione della scheda madre: To sync with your motherboard, connect the ARGB cables from the fans to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to control the lighting.
Figure 9: The Antec NX700 case showcasinle sue vivaci capacità di illuminazione ARGB.
4. Manutenzione
Regular maintenance helps ensure the longevity and optimal performance of your Antec NX700 case.
- Filtri antipolvere: Periodically clean the dust filters located at the top and bottom of the case. Gently remove them and use compressed air or a soft brush to clear accumulated dust.
- Case Exterior: Pulire le superfici esterne con un panno morbido, damp panno. Evitare detergenti abrasivi o solventi.
- Pannello in vetro temperato: Clean the tempered glass panel with a microfiber cloth and a glass cleaner designed for electronics. Avoid excessive force or harsh chemicals.
- Pulizia interna: Every few months, open the case and use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.
5. Risoluzione Dei Problemi
This section addresses common issues you might encounter with your Antec NX700 case.
5.1 Fans Not Spinning or Lighting Up
- Collegamento elettrico: Verify that all fan power cables are securely connected to the motherboard fan headers or a fan controller.
- Connessione ARGB: Ensure ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard or the case's LED controller. Incorrect connection (e.g., to a 4-pin 12V RGB header) can damage the LEDs.
- LED Button Functionality: If using the case's LED button, ensure it is functioning. Try cycling through modes.
- Software della scheda madre: If using motherboard sync, check your motherboard's ARGB software for fan control and lighting settings.
- Molex Connector: Some fan controllers or hubs may require a Molex connector for power. Ensure this is properly connected to your power supply.
5.2 No Power to System
- PSU Connection: Ensure the power supply is properly installed and connected to the motherboard and all components. Check that the PSU switch is in the 'ON' position.
- Connettori del pannello frontale: Verify that the front panel power switch cable is correctly connected to the motherboard's front panel header. Refer to your motherboard manual for the correct pinout.
5.3 Missing Motherboard Mounting Stand-offs
While the case includes standard stand-offs, some motherboard layouts (e.g., certain ATX boards) may require additional stand-offs for full support. Ensure all necessary stand-offs are installed to prevent motherboard flex and potential damage.
6. Specifiche
Detailed technical specifications for the Antec NX700 Mid-Tower ATX Gaming Case.
| Caratteristica | Specificazione |
|---|---|
| Marca | Antec |
| Serie | NX700 |
| Nome del modello | NX700 |
| Numero modello articolo | Numero di parte 0-761345-81072-2 |
| Tipo di caso | Mid Tower |
| Compatibilità della scheda madre | ATX, Micro ATX, Mini ITX |
| Materiale | SPCC + Plastic, Tempered Glass |
| Dimensioni del prodotto (LxWxH) | 17.32 x 8.66 x 19.37 pollici (440 x 220 x 492 mm) |
| Peso dell'articolo | 15.84 libbre (7.2 chilogrammi) |
| Ventilatori inclusi | 2 x 185mm ARGB (Front), 1 x 120mm ARGB (Rear) |
| Supporto ventola anteriore | 3 x 120 mm / 3 x 140 mm / 2 x 185 mm |
| Supporto per i migliori fan | 2 x 120 mm / 2 x 140 mm |
| Supporto ventola posteriore | 1 x 120 mm / 1 x 140 mm |
| PSU Shroud Fan Support | 2 x 120 mm |
| Supporto radiatore anteriore | Fino a 360 mm |
| Supporto radiatore superiore | Fino a 280 mm |
| Supporto radiatore posteriore | Fino a 140 mm |
| Altezza massima del dissipatore della CPU | 170mm |
| Lunghezza massima della GPU | 340mm |
| Lunghezza massima dell'alimentatore | 200mm (with HDD) / 365mm (without HDD) |
| Alloggiamenti unità | 2 x 3.5" HDD / 2.5" SSD (convertible), 4 x 2.5" SSD |
| Pannello I/O | Power, LED Control, Reset, 2 x USB 3.0, MIC/HD-AUDIO |
Figure 10: Dimensions of the Antec NX700 Mid-Tower ATX Gaming Case.
Figura 11: Posteriore view of the Antec NX700, showing expansion slots and fan mount.
7. Garanzia e supporto
For warranty information, technical support, or to inquire about replacement parts, please visit the official Antec website or contact Antec customer service. Keep your proof of purchase for warranty claims.
Antec Ufficiale Websito: www.antec.com
