Manuale di istruzioni per hub USB C e lettore di schede con pannello frontale da 3.5 pollici GRAUGEAR G-MP01CR

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your GRAUGEAR G-MP01CR 3.5 Inch Front Panel USB C Hub and Card Reader. This device is designed to expand the connectivity of your desktop computer by providing convenient front-panel access to high-speed USB ports and memory card slots.

Image 1.1: The GRAUGEAR G-MP01CR Front Panel USB Hub and Card Reader with its connecting cables.

2. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano presenti nel pacco. Se alcuni articoli risultano mancanti o danneggiati, contatta il servizio clienti.

• 1x GRAUGEAR G-MP01CR 3.5'' Front Panel USB Hub with Internal Card Reader
• 6x viti di montaggio
• 1x USB 3.2 Type-E Key-A 20-Pin Header Cable
• 1x USB 3.0 19-Pin Header Cable
• 1x Manuale di istruzioni
• 1x carta dei servizi

Image 2.1: All components included in the GRAUGEAR G-MP01CR package.

3. Specifiche

Image 3.1: Detailed dimensions and connection specifications for the G-MP01CR.

4. Guida all'installazione

Follow these steps to properly install the GRAUGEAR G-MP01CR into your desktop computer.

4.1 Preparazione

1. Spegni: Assicurati che il computer sia completamente spento e scollegato dalla presa a muro.
2. Caso aperto: Rimuovere il pannello laterale del case del computer per accedere ai componenti interni.
3. Individuare Bay: Identify an available 3.5-inch floppy disk drive bay. If only 5.25-inch bays are available, a 5.25-inch to 3.5-inch adapter bracket (not included) will be required.
4. Identify Headers: Locate the following headers on your motherboard:
   • An available 19-pin USB 3.0 header.
   • An available 20-pin USB 3.2 Key-A Type-E header. (Note: Some older motherboards may not have this header. A separate adapter card might be necessary to utilize the 20Gbps USB-C port.)

Image 4.1: Illustration of connecting the USB 3.2 Gen 2 Key A host and USB 3.0 19 Pin host cables to the motherboard.

4.2 Montaggio dell'unità

5. Inserisci unità: Slide the GRAUGEAR G-MP01CR into the chosen 3.5-inch bay from the front of the computer case.
6. Unità sicura: Use the provided mounting screws to secure the unit firmly into the drive bay.

Image 4.2: The front panel hub installed in a 3.5-inch bay of a desktop computer.

4.3 Cavi di collegamento

7. Connect USB 3.0 Cable: Plug the 19-pin USB 3.0 cable from the G-MP01CR into the corresponding 19-pin USB 3.0 header on your motherboard.
8. Connect USB 3.2 Gen 2x2 Cable: Plug the 20-pin USB 3.2 Key-A Type-E cable from the G-MP01CR into the corresponding 20-pin USB 3.2 Key-A Type-E header on your motherboard. Ensure correct orientation to avoid damage.
9. Collegare l'alimentazione SATA: Connect a 15-pin SATA power connector from your power supply unit (PSU) to the SATA power input on the G-MP01CR. This connection is essential for the card reader and external hard drives to function correctly.

Image 4.3: Illustration of connecting the 15-pin SATA power cable to the front panel unit.

Image 4.4: Diagram showing the connection of the USB 3.2 Gen 2 Key A host and USB 3.0 19 Pin host cables to the motherboard, along with the SATA power connection.

4.4 passaggi finali

10. Chiudi caso: Riposizionare il pannello laterale del case del computer.
11. Accensione: Plug in your computer and power it on. The operating system should automatically detect and install the necessary drivers.

5. Istruzioni per l'uso

The GRAUGEAR G-MP01CR provides multiple ports for data transfer and card reading.

5.1 Porte USB

• USB Type-C (20 Gbps): This port supports USB 3.2 Gen 2x2, offering data transfer speeds up to 20 Gigabits per second. Use this port for high-speed devices like external SSDs.
• USB Type-C (5 Gbps): This port supports USB 3.2 Gen 1, offering data transfer speeds up to 5 Gigabits per second.
• USB Type-A (5 Gbps): The two USB Type-A ports support USB 3.0, providing data transfer speeds up to 5 Gigabits per second. These are compatible with most standard USB devices.

Image 5.1: Illustration of the USB Type-C port supporting 20 Gbps data transfer.

Immagine 5.2: Es.ample benchmark results demonstrating 20 Gbps transfer speeds.

5.2 Card Readers

• Slot per scheda SD: Insert your SD card with the label facing down (upside down) for proper recognition.
• Slot per scheda MicroSD/TF: Insert your microSD or TF card into the designated slot.

Image 5.3: Guide for correct SD card insertion (label down).

6. Manutenzione

To ensure the longevity and optimal performance of your GRAUGEAR G-MP01CR, follow these general maintenance guidelines:

• Mantenere l'unità libera da polvere e detriti. Utilizzare un panno morbido e asciutto per la pulizia.
• Evitare di esporre l'unità a liquidi o a umidità eccessiva.
• Non tentare di smontare l'unità, poiché ciò potrebbe invalidare la garanzia e causare danni.

7. Risoluzione Dei Problemi

If you encounter issues with your GRAUGEAR G-MP01CR, refer to the following troubleshooting tips:

• No Power/Device Not Detected:
  • Ensure the 15-pin SATA power connector is securely attached to the unit and connected to your PSU. The card reader and some USB functions require this power.
  • Verify that the 19-pin USB 3.0 and 20-pin USB 3.2 Key-A Type-E cables are correctly and firmly plugged into their respective headers on the motherboard. Incorrect orientation of the Type-E connector can prevent functionality.
  • Check your motherboard's manual to confirm the presence and location of the required headers.
• Velocità di trasferimento dati lente:
  • Ensure you are using the correct USB port for your device's capabilities. The 20Gbps USB-C port requires a USB 3.2 Gen 2x2 compatible device and motherboard header to achieve maximum speeds.
  • Verify that your cables are rated for the desired speed (e.g., USB 3.2 Gen 2x2 cables for 20Gbps).
  • Confirm that your motherboard drivers are up to date.
• Scheda SD/MicroSD non rilevata:
  • Ensure the SD card is inserted correctly, with the label facing down.
  • Check if the card is properly seated in the slot.
  • Provare la scheda su un altro dispositivo per escludere un malfunzionamento.
• Unit Does Not Fit 3.5-inch Bay:
  • Confirm that the bay is indeed a standard 3.5-inch bay. If you are attempting to install it in a 5.25-inch bay, an adapter bracket is required.

8. Garanzia e supporto

GRAUGEAR products are designed for reliability and performance. For warranty information, please refer to the included Service Card in your package.

For technical support or further assistance, please visit the official GRAUGEAR websito o contattare il loro servizio clienti.

Ufficiale Websito: www.graugear.de