1. Introduzione
The ThruNite TC20 V2 is a high-performance handheld LED flashlight designed for various outdoor and emergency applications. It features a CREE XHP70 2nd generation LED, delivering a powerful output of up to 4068 lumens and a beam distance of up to 299 meters. This manual provides detailed instructions for the proper use, setup, and maintenance of your TC20 V2 flashlight.
Image: ThruNite TC20 V2 Flashlight with its included USB-C charging cable.
2. Cosa c'è nella scatola
Upon opening your ThruNite TC20 V2 package, you should find the following items:
- ThruNite TC20 V2 Cool White Flashlight x1
- Fondina x1
- O-ring di ricambio x2
- Cordino x1
- ThruNite Battery x1 (high capacity)
- USB-C Charging Cord x1
- Copertura in gomma USB di ricambio x1
- Spare Side Switch Cap x1
Image: All accessories included with the ThruNite TC20 V2 flashlight.
Video di unboxing
Video: An unboxing demonstration of the ThruNite TC20 V2 flashlight, showing all included components.
3. Impostazione
Before initial use, please ensure the flashlight is properly assembled and charged.
Battery Installation and Head/Tail Cap Tightening
It is crucial to screw down the light head and tail cap tightly before using or charging the flashlight to ensure proper electrical contact and water resistance.
Image: An arrow indicates the direction to screw down the light head for secure connection.
Ricarica della torcia
The TC20 V2 features a built-in USB-C 2A charging port. Connect the provided USB-C charging cord to the flashlight and a power source. During charging, the indicator light will be RED. Once fully charged, the indicator will turn BLUE. If the indicator flashes purple, it signifies abnormal charging. Only firefly, low, and medium modes are available while charging.
Image: The flashlight connected for charging, illustrating the different colors of the charging indicator light.
Installazione del cordino
To install the lanyard, thread the thin loop of the lanyard through the small hole on the tailcap of the flashlight. Then, pass the larger part of the lanyard through the thin loop and pull it tight to secure it.
Image: The flashlight being held, and examples of it being carried in its holster.
4. Istruzioni per l'uso
Accendere/Spegnere
Press the side switch to turn the light on or off.
Cambia modalità
- When the light is on, long-press the side switch to cycle through low, medium, and high brightness modes.
- Collegamento a Firefly: When the light is off, long-press the side switch to directly access firefly mode (0.3 lumens).
- Double click to activate Turbo mode from any other mode.
- Another double click from Turbo mode will activate Strobe mode.
Image: Visual guide to the flashlight's operational modes via the side switch.
Funzione di memoria
The flashlight will turn on in the last mode accessed, with the exception of firefly, turbo, and strobe modes. These special modes do not retain memory.
5. Manutenzione
To ensure the longevity and optimal performance of your ThruNite TC20 V2 flashlight, consider the following maintenance tips:
- Pulire regolarmente le filettature e gli O-ring con un panno pulito.
- Lubricate the threads and O-rings with silicone grease periodically to prevent wear and maintain water resistance.
- Mantenere la porta di ricarica pulita e libera da detriti.
- Quando non si utilizza la torcia per lunghi periodi, conservarla in un luogo fresco e asciutto.
6. Risoluzione Dei Problemi
If you encounter issues with your ThruNite TC20 V2 flashlight, try the following common troubleshooting steps:
- La luce non si accende: Ensure the battery is fully charged and correctly inserted with the positive (+) end facing the head of the flashlight. Confirm that the head and tail cap are screwed on tightly.
- Intermittent light or flickering: Check for loose connections at the head or tail cap. Clean the battery contacts and threads. Ensure the battery is not damaged.
- Problemi di ricarica: Verify the USB-C cable is securely connected to both the flashlight and the power source. Try a different USB-C cable or power adapter. Check the charging indicator light for status.
- Luminosità o tempo di esecuzione ridotti: The battery may need recharging. Extreme temperatures can affect battery performance.
If problems persist after attempting these steps, please refer to the Warranty & Support section for further assistance.
7. Specifiche
Detailed technical specifications for the ThruNite TC20 V2 Handheld Flashlight:
| Caratteristica | Descrizione |
|---|---|
| GUIDATO | CREE XHP 70 2nd gen. (lifespan of 20+ years) |
| Funziona su | 1 x ThruNite 26650 5000mAh battery |
| Riflettore | Riflettore a buccia d'arancia |
| Volume di lavorotage | 2.75 - 4.2 V |
| Uscita massima | 4068 lumens (Turbo) |
| Distanza massima del raggio | 299 metri |
| Intensità del raggio di picco | 22400 dollari |
| Resistente agli urti | 1.5 metri |
| Impermeabile | IPX-8 Standard (2 meters submersible) |
| Peso | 143g (without battery) / 5 ounces (approx.) |
| Dimensioni | 119mm (length) x 42mm (head diameter) x 33.5mm (tailcap diameter) / 4.69"D x 1.65"W x 1.65"H |
| Ricarica | Max 2A USB-C charging |
| Materiale | Alluminio |
Output Modes & Runtime:
- Turbo: 4068~1722 lumens; 220 secs + 90 mins
- Alto: 1853 lumens; 122 mins
- Medio: 320 lumens; 9 hrs
- Basso: 35 lumens; 77 hrs
- Lucciola: 0.3 lumens; 71 days
- Strobe: 1475 lumens; 211 mins
Immagine: Esploso view of the flashlight showing internal components.
Image: Demonstration of the flashlight's powerful 4068 lumen output in a dark environment.
8. Garanzia e supporto
The ThruNite TC20 V2 Handheld Flashlight comes with a 2-year warranty. For warranty claims, technical support, or any inquiries regarding your product, please contact ThruNite customer service through their official websito o rivenditore presso cui è stato acquistato il prodotto.
Per maggiori informazioni, visita il ThruNite Store.
