Pipishell Full Motion TV Wall Mount User Manual

Introduzione

This manual provides detailed instructions for the safe installation and operation of your Pipishell Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation. If you have any questions, contact customer support.

Immagine: Oltreview of Pipishell Full Motion TV Wall Mounts, models PIMFK3 and PILFK4, showing their articulating arm designs and TV mounting plates.

Informazioni importanti sulla sicurezza

ATTENZIONE: la mancata lettura e osservanza di queste istruzioni può causare gravi lesioni personali, danni alla proprietà o l'annullamento della garanzia.

• Do not install this product on drywall alone. It must be mounted to a solid wood stud, concrete wall, or brick wall.
• Assicurarsi che la struttura della parete possa sostenere in modo sicuro il peso combinato del supporto e del televisore.
• Do not exceed the maximum weight capacity specified for each model: 99 lbs (45 kg) for PIMFK3 and 132 lbs (60 kg) for PILFK4.
• Always use an assistant for lifting and positioning the television.
• Stringere saldamente tutte le viti, ma non eccessivamente. Un serraggio eccessivo può danneggiare viti e componenti.
• Controllare periodicamente tutti i collegamenti per assicurarsi che siano sempre sicuri.

Contenuto della confezione

Verificare che tutti i componenti siano presenti e integri prima dell'installazione. Se qualche componente risulta mancante o difettoso, contattare il servizio clienti Pipishell.

Componenti di montaggio:

• Montaggio piastra a parete
• Staffe TV (2x)
• Kit di montaggio (viti varie, rondelle, distanziali)
• Livella a bolla
• Fascette per cavi

Immagine: dettagliata view of the PIMFK3 mount, highlighting the security lock, compression hinges, and strong dual arms. Also shows the maximum weight capacity of 99 lbs and TV size range of 26-55 inches.

Immagine: dettagliata view of the PILFK4 mount, showcasing its six-arm structure, safety lock, extra-wide TV plate, and ultra-strong wall plate for heavy-duty support.

Strumenti necessari (non inclusi)

• Matita
• Stud Finder (per l'installazione di montanti in legno)
• Trapano elettrico
• Drill Bits (appropriate size for wall type and lag bolts)
• Chiave a bussola o chiave regolabile
• Cacciavite con testa Phillips
• Nastro di misurazione

Requisiti di installazione

Compatibilità TV:

• PIMFK3: Fits most 26-55 inch flat or curved LED, LCD, OLED TVs. Maximum weight capacity: 99 lbs (45 kg).
• PILFK4: Fits most 37-75 inch flat or curved LED, LCD, OLED TVs. Maximum weight capacity: 132 lbs (60 kg).

Compatibilità VESA:

This mount supports VESA patterns from 100x100mm up to 600x400mm. Measure the horizontal and vertical distance between the mounting holes on the back of your TV to determine its VESA pattern.

Compatibilità con il tipo di parete:

Il supporto è progettato per l'installazione su:

• Single Wood Studs (PIMFK3) or 16-inch Wood Studs (PILFK4)
• Pareti in cemento armato
• Muri di mattoni

NON montare solo su cartongesso.

Image: Diagram illustrating VESA compatibility (Min 100mm, Max 400mm for PIMFK3) and suitable wall types: single wood stud, concrete wall, and brick wall.

Image: Diagram illustrating VESA compatibility (Max 600x400mm) and suitable wall types for PILFK4: 16-inch wood studs, concrete wall, and brick wall. A warning states: Do not mount on drywall alone.

Configurazione e installazione

Step 1: Determine Mounting Location and Wall Type

1. Use a stud finder to locate the center of a wood stud if installing on wood. Mark the stud edges.
2. For concrete or brick walls, ensure the wall is solid and free of obstructions.
3. Hold the wall plate against the wall at your desired height and use a pencil to mark the pilot hole locations. Use the included bubble level to ensure it is level.

Passaggio 2: praticare i fori pilota

• Per i montanti in legno: praticare dei fori pilota utilizzando una punta da trapano da 7/32 pollici (5.5 mm) fino a una profondità di 2.2 pollici (55 mm).
• For concrete/brick walls: Drill pilot holes using a 3/8 inch (10mm) masonry drill bit to a depth of 2.4 inches (60mm). Insert concrete anchors into the holes, ensuring they are flush with the wall surface.

Passaggio 3: attaccare la piastra a parete alla parete

• Align the wall plate with the drilled holes.
• Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly with a socket wrench.

Passaggio 4: collegare le staffe TV alla TV

1. Lay your TV face down on a soft, clean surface.
2. Identify the correct diameter and length of screws for your TV's VESA mounting holes. Use the provided spacers if the TV back is uneven or if screws are too long.
3. Attach the two TV brackets to the back of your TV using the chosen screws and washers. Ensure the brackets are centered and level.

Fase 5: montare la TV sulla piastra a muro

• With an assistant, carefully lift the TV and hook the TV brackets onto the wall plate.
• Assicurarsi che il televisore sia fissato saldamente alla piastra a muro.
• Engage the safety locks on the bottom of the TV brackets to prevent accidental dislodging.

Funzionamento e regolazioni

Your Pipishell Full Motion TV Wall Mount allows for various adjustments to optimize your viewesperienza di acquisizione.

Regolazione dell'inclinazione:

The mount allows for a tilt range of -15° to +5° (PIMFK3) or -15° to +5° (PILFK4). Loosen the tilt adjustment knobs on the TV brackets, adjust the TV to the desired angle, and then re-tighten the knobs to secure the position.

Regolazione della rotazione:

The articulating arm allows the TV to swivel up to 90° left or right (PIMFK3) or 120° (PILFK4), depending on TV size and wall distance. Gently push or pull the TV to the desired viewangolo di ing.

Regolazione del livello:

After installation, you can adjust the TV's level by ±3°. Loosen the leveling screws on the TV brackets, adjust the TV to be perfectly level, and then re-tighten the screws.

Estensione e retrazione:

The mount can extend the TV away from the wall up to 19.5 inches (PIMFK3) or 16 inches (PILFK4) and retract it to a minimum distance of 3.2 inches (PIMFK3) or 3.1 inches (PILFK4) from the wall. Gently pull or push the TV to adjust the distance.

Image: Demonstrates the PIMFK3 mount's ability to pull out to 19.5 inches, tilt ±5° for anti-glaring, swivel ±90°, and level ±3° for an optimal viewesperienza di acquisizione.

Image: Illustrates the PILFK4 mount's tilt range from -15° to +5° and level adjustment of ±3° for fine-tuning the TV's position after installation.

Image: Shows the PILFK4 mount's swivel capability of 120° and its ability to retract to 3.1 inches and extend up to 16 inches from the wall, allowing for flexible viewing positions and space saving.

Manutenzione

• Periodically check that all screws and connections are secure. Re-tighten if necessary.
• Pulire il supporto con un panno morbido e asciutto. Evitare detergenti abrasivi o solventi.
• Ensure cables are properly managed and not pinched by moving parts of the mount. Use the provided cable ties to keep cables tidy.

Risoluzione dei problemi

La TV non è in piano dopo l'installazione:

Loosen the level adjustment screws on the TV brackets, adjust the TV to the desired level using a bubble level, and then re-tighten the screws.

Il supporto sembra allentato sul muro:

Immediately remove the TV from the mount. Check that all lag bolts securing the wall plate to the wall are fully tightened. If the wall material is damaged, consult a professional for repair before re-mounting.

Difficoltà nella regolazione dell'inclinazione o della rotazione:

Ensure that the tilt adjustment knobs are sufficiently loosened before attempting to adjust the tilt. For swivel, ensure no cables are snagged or preventing movement. Do not force adjustments.

Parti mancanti:

Refer to the 'Package Contents' section. If any parts are missing, contact Pipishell customer support for assistance.

Specifiche

Garanzia e assistenza clienti

Pipishell products are manufactured with quality and care. For warranty information or technical assistance, please contact Pipishell customer support through the retailer's platform or the official Pipishell websito.

Please have your product model number (PIMFK3 or PILFK4) and purchase date available when contacting support.