Prodotto finitoview
The Creality Ender-3 S1 Pro is an advanced FDM (Fused Deposition Modeling) 3D printer designed for high-temperature printing and enhanced user experience. It features a robust build, precise leveling capabilities, and a user-friendly interface, making it suitable for a wide range of printing projects.
Figure 1: The Creality Ender-3 S1 Pro 3D Printer actively printing a dolphin model.
Caratteristiche principali:
- 300°C High-Temperature Nozzle: Equipped with a brass nozzle capable of reaching 300°C, supporting a wide range of filaments including PLA, ABS, PVA, Wood, TPU, PETG, and PA.
- "Sprite" Full-metal Dual-gear Direct Extruder: Provides an 80N extrusion force for smooth and consistent filament feeding, particularly beneficial for flexible materials like TPU.
- CR Touch Automatic Leveling: Features a 16-point automatic leveling system that quickly compensates for bed height variations, ensuring optimal first layer adhesion.
- Spring Steel PEI Magnetic Build Plate: Offers excellent adhesion for printed models and allows for rapid heating. Its durable and flexible nature enables effortless removal of finished prints with a slight bend.
- 4.3-Inch Touch Screen & LED Light: A responsive touch screen with multi-language support provides intuitive UI interaction. An integrated LED light illuminates the print area for clear observation, even in low-light conditions.
- Scheda madre silenziosa a 32 bit: Ensures quiet operation during printing.
- Sensore di esaurimento del filamento: Automatically pauses printing when filament runs out, preventing failed prints.
- Funzione di ripresa della stampa: Allows the printer to resume printing from where it left off after a power outage.
Installazione e assemblaggio
The Ender-3 S1 Pro is designed for quick and easy assembly, with most components pre-installed. Follow the steps below to set up your printer.
Figure 2: Illustrated guide for the 96% pre-installed, six-step assembly of the printer.
Passaggi di configurazione iniziali:
- Disimballaggio: Estrarre con cautela tutti i componenti dall'imballaggio e verificarli con la lista di imballaggio.
- Assemblaggio del telaio: Attach the gantry to the base using the provided screws.
- Extruder and Hotend Installation: Secure the Sprite direct extruder and hotend assembly to the X-axis carriage.
- Cablaggio: Connect all cables according to the included wiring diagram. Ensure secure connections for the hotend, bed, motors, and sensors.
- Portafilamento: Mount the filament spool holder on top of the gantry.
- Touch Screen Installation: Attach the 4.3-inch touch screen to the side of the printer base.
- Collegamento elettrico: Connect the power cable and ensure the voltage switch is set correctly for your region (115V or 230V).
For detailed visual instructions, refer to the official assembly video provided by Creality.
Video 1: Official Creality video demonstrating the features and operation of the Ender-3 S1 Pro 3D Printer.
Istruzioni per l'uso
This section covers the basic steps to operate your Ender-3 S1 Pro 3D printer, from loading filament to starting your first print.
Caricamento del filamento:
- Posizionare la bobina del filamento sul portafilamento.
- Feed the filament through the filament run-out sensor.
- Press the lever on the "Sprite" direct extruder and insert the filament into the hotend until it comes out of the nozzle.
- On the touch screen, navigate to the "Prepare" menu and select "Preheat PLA" or "Preheat ABS" depending on your filament type.
Automatic Bed Leveling (CR Touch):
The CR Touch system simplifies bed leveling, ensuring a perfect first layer.
- Assicurarsi che la piastra di stampa sia pulita.
- From the touch screen, select "Level" and then "CR Touch" to initiate the automatic leveling process. The printer will probe 16 points on the bed.
- After auto-leveling, perform a Z-offset adjustment if necessary to fine-tune the nozzle height.
Figure 3: The CR Touch sensor performing a 16-point automatic bed leveling scan.
Starting a Print:
- Prepare your 3D model using slicing software (e.g., Creality Slicer, Cura, Simplify3D) and save it as a .gcode file su una scheda SD.
- Inserire la scheda SD nello slot per schede SD della stampante.
- On the touch screen, select "Print" and choose your desired .gcode file.
- The printer will begin heating the nozzle and bed, then start printing.
Figure 4: The intuitive 4.3-inch color touch screen, providing easy access to printer controls and settings.
Manutenzione
Una manutenzione regolare garantisce prestazioni ottimali e longevità della stampante 3D.
- Pulisci la piastra di stampa: After each print, allow the PEI magnetic build plate to cool and gently remove the print. Clean the surface with isopropyl alcohol to ensure good adhesion for future prints.
- Pulizia degli ugelli: Periodically clean the nozzle to prevent clogs. Use a brass brush to remove any filament residue from the exterior of the nozzle. For internal clogs, perform a cold pull or use a nozzle cleaning needle.
- Lubrificare le parti mobili: Apply a small amount of lithium grease to the Z-axis lead screws and X/Y-axis rods every few months to ensure smooth movement.
- Controllare la tensione della cinghia: Ensure the X and Y-axis belts are properly tensioned. They should be taut but not overly tight.
- Aggiornamenti del firmware: Controlla la Creality ufficiale websito per gli ultimi aggiornamenti del firmware per garantire che la stampante disponga delle funzionalità e delle correzioni di bug più recenti.
Risoluzione dei problemi
Questa sezione affronta i problemi più comuni che potresti incontrare e le loro possibili soluzioni.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Scarsa adesione del primo strato | Unleveled bed, dirty build plate, incorrect nozzle temperature, incorrect Z-offset. | Perform CR Touch auto-leveling, clean the build plate with isopropyl alcohol, adjust nozzle/bed temperatures, fine-tune Z-offset. |
| Intasamento del filamento | Dust in filament, heat creep, worn nozzle, incorrect retraction settings. | Clean the nozzle, ensure proper cooling, replace worn nozzle, adjust retraction settings in slicer. |
| Spostamento di livello | Loose belts, motor overheating, print speed too high, physical obstruction. | Check and tighten X/Y-axis belts, ensure proper ventilation for motors, reduce print speed, clear any obstructions. |
| Extruder Fan Not Working | Loose connection, fan failure. | Check fan connections to the hotend board. If still not working, the fan may need replacement. |
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Tecnologia di stampaggio | FDM (modellazione a deposizione fusa) |
| Costruisci volume | 220 x 220 x 270 mm (8.66 x 8.66 x 10.63 pollici) |
| Temperatura dell'ugello | Fino a 300°C |
| Temperatura del letto riscaldato | Fino a 110°C |
| Modalità di livellamento | CR Touch Automatic Leveling |
| Display | Schermo touch a colori da 4.3 pollici |
| Scheda madre | 32-bit Silent Motherboard |
| Estrusore | "Sprite" Full-metal Dual-gear Direct Extruder (80N extrusion force) |
| Superficie di costruzione | Spring Steel PEI Magnetic Build Plate |
| Filamenti supportati | PLA, ABS, WOOD, TPU, PETG, PA |
| Velocità di stampa | Maximum 150 mm/s |
| Precisione di stampa | ±0.1 mm |
| Potenza nominale | 350W/24V |
| Peso dell'articolo | 8.6 chilogrammi (18.92 libbre) |
Figure 5: Detailed dimensions of the Ender-3 S1 Pro 3D Printer.
Garanzia e supporto
For warranty information, technical support, and service inquiries, please refer to the official Creality 3D webo contattare direttamente il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.
Produttore: Crealità 3D
Data prima disponibilità: 26 febbraio 2022
