1. Prodotto finitoview
The EverBrite Rechargeable LED Headlamp is a versatile lighting device designed for various activities such as hiking, running, camping, and general tasks. It features multiple lighting modes, a motion sensor for hands-free operation, and a rechargeable battery.

Image 1.1: The EverBrite headlamp, illustrating its main features including the light, headband, USB charging cable, and motion sensor functionality.
2. Contenuto della confezione
- 1 x EverBrite Rechargeable LED Headlamp
- 1 x Cavo di ricarica micro-USB
- 1 batteria agli ioni di litio (preinstallata)
3. Caratteristiche principali
- Batteria ricaricabile: Equipped with a 1200mAh lithium battery and Micro-USB charging.
- 9 modalità di illuminazione: Includes XPE, COB, XPE+COB, Red Beam, and SOS Red Strobe in key light mode, plus XPE, COB, XPE+COB, and Red Beam in motion sensor mode.
- Sensore di movimento: Allows hands-free operation to turn the light on/off with a wave of the hand.
- Leggero e durevole: Constructed from ABS hard rubber, weighing approximately 0.17 lbs (80g).
- Fascia regolabile: Elastic headband fits head circumferences from 15.7" (40cm) to 31.5" (80cm).
- Angolo regolabile: headlamp can be tilted up to 45 degrees.
- Resistente alla temperatura: Operates effectively in temperatures from -4℉ (-20℃) to 140℉ (60℃).
4. Impostazione
4.1 Ricarica della testaamp
- Individuare la porta di ricarica Micro-USB sul faroamp.
- Collegare il cavo Micro-USB in dotazione alla testaamp and the other end to a 5V 1A USB charger (not included), power bank, or computer USB socket.
- The power indicator lights will show the charging status. One light flashing indicates charging, and four solid lights indicate a full charge.
- Scollega la testinaamp promptly after charging is complete to preserve battery life.
Importante: Do not turn on the light while the headlamp è in carica.

Immagine 4.1: Illustrazione della testaamp's Micro-USB charging port and battery indicator lights, demonstrating connection to a power source.
4.2 Regolazione dell'archetto
- Posizionare la testataamp sulla tua testa.
- Adjust the elastic headband to a comfortable fit. The band is designed to adapt to various head sizes (15.7"-31.5" / 40-80cm).
- Garantire la testaamp is secure but not too tight to avoid discomfort during prolonged use.

Image 4.2: The adjustable and breathable headband of the EverBrite headlamp, shown being worn by individuals.
5. Istruzioni per l'uso
5.1 Power On/Off and Mode Selection (Key Light Mode)
- Premere una volta il pulsante di accensione per accendere la testaamp.
- Within 5 seconds of turning on, press the power button repeatedly to cycle through the following modes: XPE Mode (300 Lm) > COB Mode (300 Lm) > XPE+COB Mode (500 Lm) > Raggio rosso > SOS Red Strobe.
- If the light has been on for more than 5 seconds in any mode, a single press of the power button will turn the light off directly, without cycling through all modes.

Image 5.1: Visual representation of the headlamp's various lighting modes and their respective lumen outputs.
5.2 Modalità sensore di movimento
- To activate motion sensor mode, press the dedicated motion sensor button (usually indicated by a wave icon or distinct from the main power button). A red indicator light will illuminate.
- Once activated, wave your hand within approximately 15 cm (6 inches) of the sensor to turn the light ON or OFF.
- In motion sensor mode, you can cycle through XPE, PANNOCCHIA, XPE+COB, E Raggio rosso by pressing the main power button.
- To exit motion sensor mode, press the motion sensor button again.

Image 5.2: Demonstration of the motion sensor feature, showing how to activate it and use hand gestures to control the light.
5.3 Regolazione dell'angolo
il capoamp unit can be tilted up to 45 degrees to direct the light precisely where needed. Gently push or pull the light housing to adjust its angle.

Immagine 5.3: La testaamp's adjustable angle mechanism, allowing users to direct the light beam.
6. Manutenzione
6.1 Pulizia
- Pulisci la testinaamp corpo con un morbido, damp panno. Non usare detergenti abrasivi o solventi.
- The headband is removable for easy washing. Hand wash with mild soap and water, then air dry completely before reattaching.
6.2 Conservazione
- Conservare la testaamp in un luogo fresco e asciutto, lontano dalla luce diretta del sole.
- For long-term storage, ensure the battery is partially charged (around 50%) and recharge it every 3-6 months to maintain battery health.
7. Risoluzione Dei Problemi
- headlamp non si accende:
- Ensure the battery is charged. Connect to a power source and check the charging indicator lights.
- Verify the power button is pressed correctly. - Breve durata della batteria:
- Ensure the headlamp is fully charged before use. Charging time is typically 2-3 hours.
- Battery performance can decrease over time with repeated charge cycles. - La luce tremola:
- This could indicate a low battery. Recharge the headlamp.
- If flickering persists after charging, contact customer support. - Il sensore di movimento non risponde:
- Ensure motion sensor mode is activated (red indicator light is on).
- Wave your hand within the optimal sensing distance (approx. 15 cm).
- Clean the sensor area to remove any obstructions.
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | E021047AU |
| Tipo di sorgente luminosa | LED (XPE, COB) |
| Luminosità massima | 500 Lumens (XPE+COB Mode) |
| White Brightness (XPE/COB) | 300 lumen |
| Fonte di alimentazione | Alimentato a batteria |
| Tipo di batteria | 1200mAh agli ioni di litio (inclusi) |
| Porta di ricarica | Micro-USB (5V1A input) |
| Tempo di ricarica | 2-3 ore |
| Materiale | addominali |
| Peso dell'articolo | 0.17 libbre (2.72 once / 80 g) |
| Dimensioni del prodotto | 1.42 x 2.48 x 1.73 pollici (3.6 x 6.3 x 4.39 cm) |
| Livello di resistenza all'acqua | Resistente all'acqua (IP44) |
| Temperatura di esercizio | Da -4℉ (-20℃) a 140℉ (60℃) |
| Codice UPC | 820909775829 |
9. Garanzia e supporto
9.1 Informazioni sulla garanzia
This EverBrite headlamp viene fornito con un Garanzia di 2 anno dalla data di acquisto. La presente garanzia copre difetti di fabbricazione e di lavorazione in condizioni di normale utilizzo. Non copre danni causati da uso improprio, incidenti, modifiche non autorizzate o normale usura.
9.2 Assistenza clienti
For technical assistance, warranty claims, or any questions regarding your EverBrite headlamp, please contact our customer support team:
- E-mail: support@everbrite.com (Example)
- Telefono: 1-800-XXX-XXXX (Es.ample)
- Websito: Visit the EverBrite Store on Amazon
Please have your model number (E021047AU) and proof of purchase ready when contacting support.





