AMOCAM 10-Unit Apartment Intercom System User Manual

1. Introduzione

The AMOCAM 10-Unit Apartment Intercom System is a wired video door phone solution designed for multi-unit dwellings. This system allows residents to see, hear, and speak with visitors at the outdoor station, enhancing security and convenience. It supports one outdoor camera unit and up to ten indoor monitor units, enabling communication between the outdoor station and individual households.

2. Informazioni sulla sicurezza

• Sicurezza elettrica: Ensure all power connections are made by a qualified electrician and comply with local electrical codes. Disconnect power before performing any installation or maintenance.
• Esposizione all'acqua: While the outdoor unit is weatherproof (IP65 rated), avoid direct high-pressure water spray. Ensure all connections are sealed properly.
• Gestione dei cavi: Route all cables securely to prevent tripping hazards and damage.
• Temperatura di esercizio: Do not expose the units to extreme temperatures outside the specified operating range.

3. Contenuto della confezione

Si prega di verificare che tutti gli articoli elencati di seguito siano inclusi nel pacchetto:

• 1 x unità telecamera esterna
• 10 unità monitor interne (7 pollici)
• 10 x Monitor Hanging Plates
• 10 adattatori di alimentazione per monitor da interno
• 10 x 4-core/5-core Connection Cables (for monitors)
• 1 x 2-core Connection Cable (for electric lock)
• 1 x Bag of Screws and Wall Plugs
• 1 x Manuale utente

Image 3.1: AMOCAM 10-Unit Apartment Intercom System components, showing one outdoor camera unit and ten indoor monitor units.

4. Prodotto finitoview

4.1 Unità telecamera esterna

L'unità esterna è dotata di una resistente lega di alluminio casing and is designed for outdoor installation with an IP65 weatherproof rating. It includes a 700TVL color CMOS camera with a 60/35/70/70 degree viewing angle (U/D/L/R), built-in microphone and speaker for two-way audio, and 5 LED lights for night vision. It has 10 call buttons, allowing visitors to directly contact specific indoor units.

Immagine 4.1: anteriore view of the AMOCAM outdoor camera unit, featuring the camera lens, speaker grille, and ten call buttons for individual apartment units.

Image 4.2: Labeled diagram of the AMOCAM outdoor camera unit, pointing out key components such as the microphone (MIC), camera lens, LED lights for night vision, aluminum panels, speaker, and call buttons.

4.2 Unità di monitoraggio interna

Each indoor monitor features a 7-inch TFT LCD color screen with an 800x480 resolution, providing a clear view of visitors. The monitor has touch-sensitive keys for various functions including ring cancel, volume/brightness adjustment, monitoring, unlocking, and intercom. It is constructed from ABS engineering plastics and designed for surface mounting.

Immagine 4.3: anteriore view of a single AMOCAM 7-inch indoor monitor, displaying its sleek design and touch-sensitive control icons at the bottom.

Immagine 4.4: Dettagliata view of the AMOCAM 7-inch indoor monitor, highlighting its dimensions (8.9 inches wide, 6.4 inches high) and connection ports for the camera and additional monitors on the back.

5. Configurazione e installazione

Proper installation is crucial for optimal performance. It is recommended to have a qualified technician perform the installation.

5.1 Montaggio dell'unità esterna

1. Choose a suitable location near the entrance, ensuring the camera has a clear view of visitors. The standard installation height for the camera lens is between 145cm and 160cm from the ground.
2. Secure the mounting bracket (set iron) to the wall using the provided screws and wall plugs.
3. Fissare l'unità esterna alla staffa di montaggio.

5.2 Montaggio dei monitor interni

1. Select a convenient location inside each apartment unit, typically near the entrance or in a common area.
2. Secure the hanging plate to the wall using screws and wall plugs.
3. Appendere il monitor interno sulla piastra di sospensione.

5.3 Schema elettrico

The system uses 4-core or 5-core wiring for connecting the outdoor unit to the indoor monitors, and a 2-core cable for an optional electric lock. Ensure all connections are firm and correctly aligned according to the diagram below.

Image 5.1: Diagram illustrating the AMOCAM apartment video door phone intercom system installation in a multi-unit building, showing connections between the outdoor unit, indoor units, and an optional E-lock.

Image 5.2: Comprehensive installation guide for the AMOCAM intercom system, including a diagram for mounting the outdoor station at a standard height and a detailed wiring diagram showing connections for the outdoor camera, multiple indoor monitors, power adapters, and an electric lock.

5.4 Collegamento di alimentazione

Connect the provided power adapters to each indoor monitor and plug them into a standard AC 100-240V outlet. The outdoor camera unit receives its power from the indoor monitors (DC15V).

6. Istruzioni per l'uso

6.1 Ricezione di una chiamata

When a visitor presses the call button on the outdoor unit corresponding to your apartment, your indoor monitor will ring and display the visitor's image. Press the 'Answer' icon (typically a phone receiver symbol) on the monitor to establish two-way communication.

6.2 Comunicazione bidirezionale

After answering, you can speak with the visitor through the built-in microphone and speaker on the indoor monitor. The outdoor unit also has a microphone and speaker for the visitor.

6.3 Monitoraggio

A view the outdoor area without a visitor initiating a call, press the 'Monitor' icon (typically an eye symbol) on your indoor monitor. This will activate the outdoor camera and display the live feed on your screen.

6.4 Apertura della porta

If an electric lock is connected to the system, you can unlock the door remotely by pressing the 'Unlock' icon (typically a key symbol) on your indoor monitor during a call or while monitoring.

6.5 Regolazione delle impostazioni

The indoor monitor allows adjustment of various settings:

• Volume: Adjust the ringtone and communication volume using the dedicated icon (speaker symbol).
• Luminosità e contrasto: Regolare le impostazioni dello schermo in modo ottimale viewing.
• Suoneria: Select from 16 different doorbell chimes.

Image 6.1: Close-up of the AMOCAM indoor monitor's touch keys, displaying a live video feed on the screen. The image emphasizes the modern design and ease of operation.

7. Manutenzione

• Pulizia: Utilizzare un panno morbido e asciutto per pulire i monitor interni. Per l'unità esterna, adamp è possibile utilizzare un panno. Evitare detergenti abrasivi o solventi.
• Ispezione dei cavi: Periodically check all wiring for signs of wear or damage. Ensure connections remain secure.
• Pulizia delle lenti: Gently clean the camera lens on the outdoor unit with a soft, lint-free cloth to maintain clear video quality.

8. Risoluzione Dei Problemi

9. Specifiche

10. Garanzia e supporto

AMOCAM products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or contact AMOCAM customer support. If you encounter any issues not covered in this manual, please reach out to our support team for assistance.

Produttore: AMOCAM

Informazioni sui contatti: Please visit the official AMOCAM website or your point of purchase for the latest support contact details.