1. Introduzione
This manual provides essential information for the proper installation, operation, and maintenance of your SIGNALPLUS Wide-Band Outdoor Omni-Directional Cellular Antenna. This antenna is designed to enhance 2G, 3G, 4G LTE, and 5G signals for various devices, including routers and cell phone signal boosters, across a broad frequency range of 698-2700MHz.
Si prega di leggere attentamente il presente manuale prima dell'installazione e di conservarlo per riferimento futuro.
2. Prodotto finitoview
The SIGNALPLUS Omni-Directional Cellular Antenna is engineered for outdoor use, offering 360-degree signal reception and transmission. Its robust design ensures reliable performance in various environmental conditions.
Image: Diagram illustrating the antenna's functions and typical application areas, including compatibility with 2G/3G/4G/LTE/WiFi, working with routers/signal boosters, and supporting various carriers. It also highlights application areas like M2M, poor data signal reception, slow data transmission, and mobile offices.
Image: Visual representation of various compatible 4G/5G devices with external antenna ports, including routers and signal boosters from brands like Netgear, MoFi, Huawei, TP-Link, Pepwave, Cradlepoint, Cel-Fi, SureCall, WeBoost, and HiBoost. It also lists supported carriers such as Verizon, AT&T, T-Mobile, Telus, Bell Canada, Rogers, and DigiCel.
3. Contenuto della confezione
Verificare che tutti gli articoli elencati di seguito siano presenti e in buone condizioni all'apertura della confezione. Se alcuni articoli risultano mancanti o danneggiati, contattare l'assistenza clienti.
- 1 x Antenna
- 1 set hardware (mounting bracket, U-bolts, nuts, washers, expansion bolts)
- 1 x 10-meter RG58 cable
- 1 x TS-9 adapter
- 1 x N male adapter
Image: A clear layout of all components included in the package, featuring the main antenna unit, a 10-meter RG58 cable with N male and SMA male connectors, a TS-9 adapter, an N male adapter, and the complete set of mounting hardware including U-bolts and brackets.
4. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Gamma di frequenza | 698-960 MHz / 1710-2700 MHz |
| Guadagno | 11 dBi / 12 dBi |
| Larghezza di banda | Frequenza 154MHz / 990MHz |
| Half-power Beam Width | A: 360° V: 25° |
| ROS | ≤ 1.5 |
| Impedenza di ingresso | 50 Ohm |
| Polarizzazione | Verticale |
| Potenza massima in ingresso | 100 L |
| Protezione contro i fulmini | Terra CC |
| Tipo di connettore di ingresso | N Femmina |
| Dimensioni (mm) | 60x750 |
| Peso dell'antenna | 1.50 kg (3.3 libbre) |
| Temperatura di esercizio | -40 a 60 °C |
| Velocità del vento nominale | 60 metri al secondo |
| Materiale Radome | addominali |
| Hardware di montaggio (mm) | 40-60 |
5. Istruzioni per l'installazione
Un'installazione corretta è fondamentale per prestazioni ottimali. Seguire attentamente questi passaggi.
5.1 Scegliere una posizione di installazione
Select an outdoor location that is as high as possible and free from obstructions (e.g., buildings, trees) to ensure a clear line of sight to cellular towers. The antenna is omni-directional, meaning it receives signals from all directions, but height and clear surroundings are still beneficial.
Immagine: Un example of the antenna installed outdoors on a pole, surrounded by trees and a building in the background, demonstrating a typical mounting scenario.
5.2 Assemble the Antenna and Mounting Hardware
- Attach the provided mounting bracket to the base of the antenna using the small bolts and nuts.
- Secure the U-bolts to the mounting bracket.
- Mount the assembled antenna onto a pole (40-60mm diameter recommended) using the U-bolts, washers, and nuts. Ensure it is tightened securely to withstand wind.
Image: A person holding the antenna vertically, with an arrow indicating its length of 29.5 inches (75 cm), providing a sense of its physical dimensions.
5.3 Collegamento dei cavi
- Connect one end of the 10-meter RG58 cable to the N Female connector at the base of the antenna.
- Route the cable to your router or signal booster, ensuring it is protected from damage and moisture.
- Depending on your device's input, use the appropriate adapter (TS-9 or N male) to connect the other end of the RG58 cable to your router or signal booster. Ensure all connections are finger-tight.
5.4 Guida video all'installazione
Per una guida visiva sul processo di installazione, fare riferimento al video qui sotto:
Video: A step-by-step demonstration of how to assemble and connect the SIGNALPLUS omni-directional antenna to a router or signal booster. The video shows attaching the mounting bracket, securing the antenna to a pole, and connecting the N-Female cable to the antenna and then to the device using appropriate adapters.
6. Istruzioni per l'uso
Once the antenna is installed and connected, ensure your router or signal booster is powered on. The antenna will automatically begin receiving and transmitting signals. No specific configuration is required for the antenna itself.
- Monitoraggio della potenza del segnale: Check the signal strength indicator on your connected device (router, signal booster, or phone) to verify improved reception.
- Posizionamento ottimale: While omni-directional, slight adjustments to the antenna's height or immediate surroundings might further optimize signal quality in some challenging environments.
7. Manutenzione
The SIGNALPLUS antenna is designed for durability and requires minimal maintenance.
- Ispezione periodica: Annually inspect the antenna and mounting hardware for any signs of wear, corrosion, or loosening. Ensure all connections remain tight.
- Pulizia: If necessary, gently clean the antenna's radome with a soft, damp cloth to remove dirt or debris that might accumulate over time. Avoid harsh chemicals or abrasive materials.
- Integrità del cavo: Check the coaxial cable for any kinks, cuts, or damage. Damaged cables can degrade signal performance.
8. Risoluzione Dei Problemi
Se riscontri problemi con l'antenna, prendi in considerazione i seguenti passaggi per la risoluzione dei problemi:
- Nessun miglioramento del segnale:
- Ensure all cable connections are secure and correctly attached to both the antenna and your device.
- Verify that your router or signal booster is powered on and configured correctly according to its own manual.
- Check for any new obstructions that might be blocking the signal path.
- Confirm that the antenna is mounted at a sufficient height.
- Segnale intermittente:
- Inspect the coaxial cable for damage or loose connections.
- Ensure the mounting hardware is firmly secured and the antenna is not swaying in the wind.
- Danni fisici:
- If the antenna or cables are visibly damaged, they may need replacement.
If problems persist after following these steps, please contact SIGNALPLUS customer support.
9. Garanzia e supporto
This product is covered by a standard return policy allowing for a refund or replacement within 30 days of purchase. For specific warranty details and to initiate a return or replacement, please refer to your purchase documentation or contact the seller directly.
For additional support or inquiries, you may visit the official SIGNALPLUS store: SIGNALPLUS Store on Amazon.
