Byron Wireless Doorbell Kit DBY-22321NP

Introduzione

Thank you for choosing the Byron Wireless Doorbell Kit DBY-22321NP. This kit provides a reliable and convenient solution for your home or office, featuring a wireless range of up to 150 meters, 16 selectable melodies, and adjustable volume control. This manual will guide you through the installation, operation, and maintenance of your new doorbell system to ensure optimal performance and longevity.

Informazioni sulla sicurezza

• Leggere attentamente tutte le istruzioni prima dell'installazione e dell'uso.
• Non esporre le unità a temperature estreme, alla luce solare diretta o a umidità eccessiva.
• Use only the specified battery types. Ensure correct polarity when inserting batteries.
• Tenere le batterie fuori dalla portata dei bambini. In caso di ingestione, consultare immediatamente un medico.
• Non tentare di aprire o riparare le unità autonomamente. Per qualsiasi intervento di assistenza, rivolgersi a personale qualificato.
• Dispose of old batteries and electronic waste responsibly according to local regulations.

Contenuto della confezione

Si prega di controllare il contenuto della confezione per assicurarsi che siano presenti tutti gli articoli:

• 1x Wireless Doorbell Chime Unit (Receiver)
• 1x pulsante wireless (trasmettitore)
• Materiale di montaggio (viti, tasselli, adesivo)
• Batteries (for push button, and possibly for chime if battery-operated)
• Manuale dell'utente (questo documento)

Figure 1: Main components of the Byron Wireless Doorbell Kit.

Configurazione e installazione

1. Installazione delle batterie

Per il pulsante (trasmettitore):

1. Gently pry open the back cover of the push button unit.
2. Insert the supplied battery (e.g., CR2032 lithium battery) into the battery compartment, ensuring correct polarity (+/-).
3. Chiudere saldamente il coperchio posteriore.

Per l'unità Chime (ricevitore):

The chime unit may be battery-operated or plug-in. If battery-operated, open the battery compartment on the back and insert the required batteries (e.g., 3x AA batteries), observing polarity. If plug-in, simply plug it into a standard wall outlet.

Figura 2: Posteriore view of the chime unit and push button, illustrating battery compartments and mounting options.

2. Montaggio del pulsante

Choose a suitable location near your entrance, away from direct metal surfaces which can interfere with the wireless signal. The push button is typically weather-resistant (IP44 rated).

• Utilizzando le viti: Mark the desired mounting holes, drill pilot holes if necessary, and secure the push button using the provided screws and wall plugs.
• Utilizzo del cuscinetto adesivo: Clean the mounting surface thoroughly. Peel off the protective film from the adhesive pad and firmly press the push button onto the surface for at least 30 seconds.

3. Posizionamento dell'unità campanello

Place the chime unit in a central location within your home where the sound can be easily heard. Consider the maximum wireless range of 150 meters. Avoid placing it near large metal objects or other electronic devices that might cause interference.

Figure 3: Close-up of the push button, showing the clear nameplate cover.

4. Abbinamento (se necessario)

Most Byron doorbell kits come pre-paired. If your chime does not ring when the push button is pressed, you may need to pair them:

1. On the chime unit, locate the pairing button (often a small button inside the battery compartment or on the side).
2. Press and hold the pairing button for a few seconds until an indicator light flashes or a sound is heard.
3. Within 10 seconds, press the push button. The chime unit should ring, indicating successful pairing.
4. Se l'associazione fallisce, ripetere la procedura.

Istruzioni per l'uso

1. Melodie cangianti

Your doorbell kit offers 16 different melodies. To change the melody:

• Locate the melody selection button on the chime unit. This is often a small button on the side or front.
• Premere ripetutamente il pulsante per scorrere le melodie disponibili. Il campanello riprodurrà ogni melodia selezionata.
• Stop pressing when you hear your desired melody. It will be saved automatically.

Figura 4: lato view of the chime unit, indicating the location of control buttons.

2. Regolazione del volume

To adjust the volume level of the chime unit:

• Locate the volume control button on the chime unit. This might be a dedicated button or integrated with the melody selection.
• Press the button to cycle through different volume levels (e.g., High, Medium, Low, Mute).
• Select the volume level that best suits your needs.

Manutenzione

• Pulizia: Pulire le unità con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
• Sostituzione della batteria:
  • If the push button stops working or its range decreases, replace the battery (e.g., CR2032).
  • If the chime unit's sound becomes weak or it stops ringing (and it's battery-operated), replace its batteries (e.g., AA).
  • Always replace all batteries at the same time and ensure correct polarity.
• Protezione ambientale: Non smaltire gli apparecchi elettrici come rifiuti urbani indifferenziati. Utilizzare strutture di raccolta differenziata. Contatta il tuo governo locale per informazioni riguardanti i sistemi di raccolta disponibili.

Risoluzione dei problemi

Specifiche

Garanzia e supporto

Byron products are manufactured to high quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package or visit the official Byron websito per termini e condizioni di garanzia dettagliati.

For technical support, troubleshooting assistance, or to inquire about spare parts, please contact Byron customer service through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (DBY-22321NP) and purchase details ready.

Puoi trovare maggiori informazioni e supporto su: www.byron.com