Manuale di istruzioni per l'action figure Transformers Studio Series Core Ironhide

1. Introduzione

Welcome to the instruction manual for your new Transformers Studio Series Core Ironhide action figure. This collectible figure brings the iconic character Ironhide from the Transformers movie universe into your collection. Designed for ages 8 and up, this figure offers two distinct modes: a robot mode and a van mode, with a 15-step conversion process.

The package includes the Ironhide figure, two blaster accessories, and this instruction manual.

Figure in robot mode, equipped with blaster accessories.

2. Informazioni sulla sicurezza

AVVERTIMENTO: Small parts may be generated during play or transformation. This product is non adatto a bambini di età inferiore a 3 anni due to choking hazards. Adult supervision is recommended for younger users.

• Tenere lontano da fiamme libere o fonti di calore estreme.
• Do not attempt to force parts during transformation; refer to instructions if resistance is met.
• Smaltire i materiali di imballaggio in modo responsabile.

3. Installazione e assemblaggio iniziale

Your Transformers Studio Series Core Ironhide figure comes pre-assembled in robot mode within its packaging.

1. Estrarre con cautela la figura e i suoi accessori dalla confezione.
2. Locate the two blaster accessories. These can be held in Ironhide's hands in robot mode or attached to specific ports in van mode.
3. Inspect the figure for any loose parts or damage from shipping. If any issues are found, contact customer support.

Ironhide figure as seen in its packaging.

4. Istruzioni per l'uso: Trasformazione

The Ironhide figure can convert between robot mode and van mode in 15 steps. Follow the visual instructions provided on the back of the product packaging for detailed guidance.

Visual guide for the 15-step transformation process.

4.1. Modalità Robot

In robot mode, Ironhide is highly articulated, allowing for various poses. The two blaster accessories can be attached to his hands.

Davanti e dietro views of Ironhide in robot mode.

4.2. Van Mode

To convert to van mode, carefully follow the 15 steps outlined in the visual guide. Ensure all panels and tabs are securely aligned to form the vehicle. The blaster accessories can be stored on the figure in this mode.

Ironhide in van mode.

5. Manutenzione

• Pulizia: Wipe the figure with a soft, dry cloth. For stubborn dirt, a slightly damp È possibile utilizzare un panno e asciugare immediatamente. Evitare prodotti chimici aggressivi o detergenti abrasivi.
• Magazzinaggio: Conservare la statuetta in un luogo fresco e asciutto, lontano dalla luce solare diretta, per evitare che scolorisca o si degradi il materiale.
• Gestione: Handle the figure with care, especially during transformation, to avoid stressing joints or breaking small parts.

6. Risoluzione Dei Problemi

• Parti non adatte durante la trasformazione: Ensure all previous steps are correctly executed. Do not force parts; gently re-align and try again. Refer to the visual guide for precise positioning.
• Giunti allentati: Over time, joints may become slightly loose with repeated use. This is normal wear and tear.
• Accessori mancanti: Check all packaging materials thoroughly. If an accessory is genuinely missing upon purchase, contact customer support.

7. Specifiche

8. Garanzia e supporto

For warranty information or customer support regarding your Transformers Studio Series Core Ironhide figure, please refer to the manufacturer's official website or contact their customer service department directly. Contact details are typically provided on the product packaging or the manufacturer's official online resources.

Produttore: Hasbro