Manuale utente della scrivania mobile con molla a gas BONTEC

Introduzione

Thank you for choosing the BONTEC Gas Spring Mobile Stand Up Desk. This versatile and ergonomic desk is designed to provide a flexible workspace, allowing you to easily transition between sitting and standing positions. Its mobile design with rolling casters makes it ideal for various environments, from home offices to professional settings. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal use and longevity of your desk.

Figure 1: BONTEC Gas Spring Mobile Stand Up Desk (White)

Informazioni sulla sicurezza

Si prega di leggere attentamente tutte le avvertenze di sicurezza prima del montaggio e dell'uso. Il mancato rispetto di queste istruzioni può causare lesioni o danni al prodotto.

• Be careful when adjusting the height of the desk and ensure it is stable.
• Do not carry a load over 33 lbs (15 kg) on the desktop.
• Do not move the desk when there are objects on it to prevent items from falling or the desk from tipping.
• Always use the desk on a flat and stable surface.
• Keep children and pets away from the desk during operation and adjustment.

Contenuto della confezione

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact BONTEC customer support.

Figura 2: Tutti i componenti inclusi nella confezione.

• Desktop (MDF material)
• Gas Spring Column
• H-shaped Frame Base (Alloy Steel)
• Rolling Casters (4 pieces, with 2 lockable)
• Mobile Desk Hook
• Assembly Hardware (screws, wrench, tools)
• Manuale di istruzioni

Istruzioni di montaggio

Follow these steps carefully to assemble your BONTEC Gas Spring Mobile Stand Up Desk. It is recommended to assemble on a soft, clean surface to prevent scratches.

1. Fissare le rotelle alla base: Secure the four rolling casters into the designated holes on the H-shaped frame base. Ensure two of the casters with locking mechanisms are placed on the same side for easier access.
2. Connect Gas Spring Column to Base: Align the bottom of the gas spring column with the center mounting point on the H-shaped base. Use the provided screws and tools to firmly attach the column to the base.
3. Attach Desktop to Gas Spring Column: Carefully place the desktop onto the top of the gas spring column, aligning the pre-drilled holes. Secure the desktop using the appropriate screws. Ensure the height adjustment lever is accessible.
4. Install Mobile Desk Hook: Attach the mobile desk hook to the side of the desktop as desired, using the provided hardware.
5. Controllo finale: Once assembled, gently test the desk for stability and ensure all connections are tight.

Figure 3: Illustration of attaching the base to the main column.

Figure 4: Illustration of attaching the desktop to the gas spring column.

Istruzioni per l'uso

Regolazione dell'altezza

The BONTEC desk features a gas spring mechanism for smooth and effortless height adjustment, allowing you to switch between sitting and standing positions.

• Per alzare la scrivania: Press the height adjustment lever located under the desktop. The pneumatic spring will provide an upward force, lifting the desktop. Release the lever at your desired height.
• Per abbassare la scrivania: Press the height adjustment lever and simultaneously apply downward pressure on the desktop. Release the lever when the desk reaches your desired lower height.

Figure 5: Height adjustment mechanism operation.

Ruote mobili e bloccabili

The desk is equipped with four rolling casters for easy movement. Two of these casters have locking mechanisms to secure the desk in place.

• Per spostare la scrivania: Ensure the caster locks are disengaged. Gently push or pull the desk to your desired location.
• To Lock the Desk in Place: Press down on the locking levers on the two lockable casters until they click into position. This will prevent the desk from rolling.
• To Unlock the Desk: Lift the locking levers on the two lockable casters to disengage the locks.

Figure 6: Detail of the lockable rolling casters.

Manutenzione

Regular maintenance will help prolong the life and appearance of your BONTEC desk.

• Pulizia: Pulisci il desktop e la cornice con la pubblicitàamp panno. Per macchie ostinate, è possibile utilizzare una soluzione di sapone delicato, seguita da una pulizia con un panno pulito e asciutto. Evitare prodotti chimici aggressivi o detergenti abrasivi.
• Ruote: Periodically check the casters for any accumulated dust or debris and clean as necessary to ensure smooth rolling.
• Hardware: Controllare di tanto in tanto tutte le viti e gli elementi di fissaggio per assicurarsi che siano ben serrati. Serrare nuovamente se necessario.
• Molla a gas: The gas spring mechanism is designed for long-term use and generally requires no special maintenance. Avoid applying excessive force beyond the recommended weight capacity.

Risoluzione dei problemi

Specifiche

Figure 7: Key dimensions of the BONTEC Mobile Stand Up Desk.

Garanzia e supporto

For warranty information, technical support, or to order replacement parts, please contact BONTEC customer service. Refer to the contact information provided with your product packaging or visit the official BONTEC websito.

BONTEC Store: Visit the BONTEC Store on Amazon