1. Introduzione
Thank you for choosing the ATTOP Mini Drone with 1080P Camera. This manual provides essential information for the safe operation, setup, and maintenance of your drone. Please read it thoroughly before first use and retain it for future reference.
This drone is designed for users aged 14 years and above. Adult supervision is recommended for younger users.
2. Cosa c'è nella scatola
Your ATTOP Mini Drone package includes the following components:
- 1 x ATTOP Mini Drone (X-PACK 17)
- 1 telecomando 2.4G
- 1 x Telefono Clamp per telecomando
- 3 x 3.7V 500mAh Rechargeable Batteries (for drone)
- 1 x USB Charging Cable (for drone batteries)
- 4 x Protezioni dell'elica
- 2 eliche di ricambio
- 1 x Cacciavite
- 1 x Manuale utente

Image: All components included in the ATTOP Mini Drone package.
3. Prodotto finitoview
Familiarize yourself with the main parts of your ATTOP Mini Drone and its remote controller.
Componenti per droni
- Braccia pieghevoli: Per uno stoccaggio compatto e una facile trasportabilità.
- Telecamera FPV 1080P: Captures high-resolution photos and videos with a 90° wide-angle view.
- Eliche: Four main propellers for flight.
- Vano batteria: Located at the rear of the drone.
- Pulsante di accensione: On top of the drone.
- Luci LED: Indicate drone status.

Image: The ATTOP Mini Drone in its folded and unfolded states, demonstrating its compact and portable design.
Componenti del telecomando
- Joystick sinistro: Controlla l'altitudine e la rotazione.
- Joystick destro: Controlla il movimento avanti/indietro e sinistra/destra.
- Pulsante di accensione: Per accendere/spegnere il controller.
- Pulsante di decollo/atterraggio con un solo tasto: Avvia il decollo o l'atterraggio automatico.
- Pulsante modalità senza testa: Attiva la modalità di volo senza testa.
- 3 Speed Modes Button: Toggles between low, medium, and high speeds.
- Pulsante di rotazione a 360°: Performs aerial flips.
- Telefono Clamp: Attaches to the top of the controller to hold your smartphone for FPV viewing.
4. Ricarica delle batterie
The drone comes with three modular 3.7V 500mAh rechargeable batteries. Ensure all batteries are fully charged before flight.
- Remove the drone battery from the drone by gently pulling it out from the rear compartment.
- Collegare la batteria del drone al cavo di ricarica USB.
- Collegare il cavo di ricarica USB a una fonte di alimentazione USB (ad esempio, una porta USB del computer, un adattatore da parete USB).
- The indicator light on the USB cable will show charging status (refer to cable's specific indicator behavior).
- La ricarica richiede in genere circa 60-80 minuti per batteria.
- Una volta caricata completamente, scollegare la batteria dal cavo.

Image: The three included drone batteries, providing up to 30 minutes of flight time.
5. Impostazione del controller
Installazione delle batterie del controller
Il telecomando richiede 3 batterie AAA (non incluse).
- Aprire il vano batterie sul retro del telecomando.
- Inserire 3 batterie AAA, assicurandosi della corretta polarità (+/-).
- Chiudere bene il vano batterie.
Allegare il numero di telefonoamp
Fai scorrere il telefono clamp onto the designated slot on the top of the remote controller until it clicks into place. This allows you to mount your smartphone for FPV viewing.
6. Installazione e connessione dell'app
Per FPV (prima persona) View) and advanced control features, download the