1. Introduzione
This manual provides essential instructions for setting up, operating, and maintaining your Bose SoundDock Series II Digital Music System. This system is designed to provide high-quality audio playback from compatible Apple iPod models through its integrated docking station. Please read this manual thoroughly before using your SoundDock system.
2. Informazioni sulla sicurezza
Per ridurre il rischio di scosse elettriche, incendi o lesioni, osservare sempre le seguenti precauzioni di sicurezza:
- Do not expose the system to liquids or moisture.
- Assicurare una ventilazione adeguata; non ostruire le aperture di ventilazione.
- Use only the power supply provided by Bose or an authorized replacement.
- Non tentare di riparare questo prodotto da soli. Affidare tutte le operazioni di manutenzione a personale di assistenza qualificato.
- Place the system on a stable, level surface.
Refer to the label on the bottom of the SoundDock unit for specific electrical ratings and compliance information.
Immagine: Bottom label of the Bose SoundDock Series II. This label provides important product information, including the serial number 049371903430176AE, electrical input/output requirements (+18V 1A, -18V 1A), and various compliance certifications. It also states to refer to the instruction manual for proper installation and operating procedures.
3. Contenuto della confezione
Carefully unpack your Bose SoundDock Series II system and ensure all components are present:
- Bose SoundDock Series II Digital Music System
- Power Supply Unit (PSM36W-208)
- Cavo di alimentazione CA
Immagine: The Bose SoundDock Series II unit, accompanied by its power supply adapter and the detachable AC power cord. These are the primary components included with the system.
4. Impostazione
4.1. Collegamento dell'alimentazione
- Connect the small plug from the power supply unit into the 'POWER' input jack on the back of the SoundDock system.
- Attach the AC power cord to the power supply unit.
- Plug the other end of the AC power cord into a working electrical outlet.
Immagine: Posteriore view of the Bose SoundDock Series II. This image highlights the 'POWER' input port, where the power supply connects, and the 'AUDIO IN' auxiliary input port for connecting external audio devices.
Immagine: Un primo piano view of the Bose power supply unit (Model: PSM36W-208). This adapter converts AC power to the DC voltage required by the SoundDock system, with specifications for input (100-240V) and output (+18V 1A, -18V 1A).
4.2. Placing Your iPod
Gently place your compatible iPod onto the 30-pin dock connector located on the front of the SoundDock system. Ensure it is seated firmly. The iPod will begin charging and the SoundDock will be ready for audio playback.
Immagine: An iPod device securely docked into the Bose SoundDock Series II. The iPod's screen displays music playback information, indicating a successful connection and readiness for audio output through the SoundDock speakers.
Immagine: Un dettagliato view of the 30-pin dock connector on the Bose SoundDock Series II. This connector is designed for compatible iPod models. The image also shows the integrated volume control buttons ('+' and '-') located on either side of the docking area.
5. Operating the SoundDock
5.1. Riproduzione di base
Once your iPod is docked and the SoundDock is powered on, the iPod's audio will automatically play through the SoundDock speakers. Use the controls on your iPod to select music, play, pause, skip tracks, and navigate menus.
5.2. Controllo del volume
Adjust the playback volume using the '+' and '-' buttons located on the SoundDock unit, adjacent to the dock connector. You can also control the volume directly from your docked iPod.
5.3. Ingresso ausiliario
To play audio from other devices (e.g., MP3 players, smartphones without a dock connector), connect them to the 'AUDIO IN' port on the back of the SoundDock using a standard 3.5mm audio cable (not included). When a device is connected to the auxiliary input, the SoundDock will automatically switch to this source.
6. Manutenzione
To ensure the longevity and optimal performance of your SoundDock system:
- Pulizia: Use a soft, dry cloth to clean the exterior surfaces. Do not use liquid cleaners or sprays.
- Magazzinaggio: Se si conserva l'unità per un periodo prolungato, scollegarla dall'alimentazione e conservarla in un luogo fresco e asciutto.
- Connettore dock: Keep the dock connector free of dust and debris to ensure a reliable connection with your iPod.
7. Risoluzione Dei Problemi
If you encounter issues with your SoundDock Series II, refer to the following common solutions:
| Problema | Possibile soluzione |
|---|---|
| Nessun potere | Ensure the power cord is securely connected to the SoundDock, the power supply, and a working electrical outlet. |
| No sound from iPod | Verify the iPod is properly seated in the dock. Check the volume levels on both the SoundDock and the iPod. Ensure no device is connected to the 'AUDIO IN' port if you intend to use the iPod. |
| iPod not charging | Confirm the SoundDock is powered on and the iPod is correctly docked. Try reseating the iPod. |
| Distorsione del suono | Reduce the volume on both the SoundDock and the iPod. Ensure the audio source is not overdriven. |
Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti.
8. Specifiche
- Modello: SoundDock Series II
- Produttore: Bose
- Dimensioni del prodotto (L x P x A): 6.65 x 11.91 x 6.48 pollici
- Peso dell'articolo: 4.56 libbre
- Colore: Nero
- Primary Connectivity: 30-pin iPod Dock Connector
- Ingresso ausiliario: Jack stereo da 3.5 mm
- Numero di serie: 049371903430176AE
9. Garanzia e supporto
This product is an Amazon Renewed item and is backed by the Garanzia Amazon Renewed. This guarantee provides for a replacement or refund within 90 days of receipt if you are not satisfied with your purchase. For any issues or support inquiries regarding your renewed SoundDock system, please contact Amazon Renewed customer service directly.
