Silenzio! Manuale di istruzioni del dissipatore per CPU Pure Rock 2 FX

1. Introduzione

The be quiet! Pure Rock 2 FX CPU Cooler (Model: BK033) is designed to provide high cooling efficiency and quiet operation for multimedia and gaming systems. It features vibrant ARGB illumination and is compatible with a wide range of Intel and AMD sockets.

Image: The be quiet! Pure Rock 2 FX CPU Cooler featuring its illuminated ARGB fan and black heatsink design.

2. Contenuto della confezione

Prima di iniziare l'installazione, assicurarsi che tutti i componenti siano presenti:

• be quiet! Pure Rock 2 FX CPU Cooler
• Light Wings 120mm PWM high-speed fan
• Mounting brackets for Intel (1700 / 1200 / 2066 / 1150 / 1151 / 1155 / 2011-3 Square ILM)
• Mounting brackets for AMD (AM5 / AM4)
• Pasta termica
• Manuale di installazione

Immagine: Un completo sopraview of all parts included in the be quiet! Pure Rock 2 FX CPU Cooler package, including the heatsink, fan, mounting hardware, and manual.

3. Specifiche

4. Installazione

The installation process varies slightly depending on your CPU socket type (AMD or Intel). Please follow the instructions carefully for your specific platform.

4.1. Preparazione generale

• Assicurati che il sistema sia spento e scollegato.
• Remove your existing CPU cooler.
• Clean any old thermal paste from your CPU's integrated heat spreader (IHS) using isopropyl alcohol and a lint-free cloth.

4.2. AMD AM4 / AM5 Installation

For AMD AM4/AM5 sockets, the existing motherboard backplate is utilized. Remove the plastic retention brackets around the CPU socket, but keep the metal backplate attached to the motherboard.

1. Install the four plastic standoffs onto the motherboard's CPU socket holes.
2. Place the two metal AM4/AM5 brackets onto the plastic standoffs, ensuring correct orientation.
3. Secure the metal brackets with the four provided AM4/AM5 screws. Tighten them evenly in a cross pattern until snug.
4. Apply a small amount of thermal paste to the center of your CPU's IHS.
5. Remove the protective film from the heatsink base.
6. Carefully place the heatsink onto the CPU, aligning the mounting nuts with the screws on the brackets.
7. Using the provided screwdriver, tighten the mounting nuts evenly in a cross pattern until the heatsink is securely mounted.
8. Attach the Light Wings 120mm fan to the heatsink using the included fan clips. Ensure the fan is oriented to push air through the heatsink towards the rear of the case.
9. Collegare il cavo della ventola PWM a 4 pin al connettore CPU_FAN sulla scheda madre.
10. Connect the 3-pin ARGB cable to a compatible 5V ARGB header on your motherboard.

4.3. Intel LGA 1700 / 1200 / 115x Installation

For Intel sockets, you will use the provided Intel backplate and mounting hardware.

1. Adjust the mounting hole position on the Intel backplate to match your CPU socket (e.g., LGA 1700).
2. Place the Intel backplate on the backside of your motherboard, aligning the holes with the CPU socket.
3. Install the four plastic standoffs onto the motherboard's CPU socket holes, screwing them into the backplate.
4. Place the two metal Intel brackets onto the plastic standoffs, ensuring correct orientation.
5. Secure the metal brackets with the four provided Intel screws. Tighten them evenly in a cross pattern until snug.
6. Apply a small amount of thermal paste to the center of your CPU's IHS.
7. Remove the protective film from the heatsink base.
8. Carefully place the heatsink onto the CPU, aligning the mounting nuts with the screws on the brackets.
9. Using the provided screwdriver, tighten the mounting nuts evenly in a cross pattern until the heatsink is securely mounted.
10. Attach the Light Wings 120mm fan to the heatsink using the included fan clips. Ensure the fan is oriented to push air through the heatsink towards the rear of the case.
11. Collegare il cavo della ventola PWM a 4 pin al connettore CPU_FAN sulla scheda madre.
12. Connect the 3-pin ARGB cable to a compatible 5V ARGB header on your motherboard.

5. Istruzioni per l'uso

5.1. Controllo della ventola

The Light Wings 120mm PWM fan is connected to your motherboard's CPU_FAN header. Fan speed can be controlled via your motherboard's BIOS/UEFI settings or through compatible software provided by your motherboard manufacturer. It is recommended to set a fan curve that balances cooling performance with noise levels.

5.2. Controllo dell'illuminazione ARGB

The ARGB lighting of the Light Wings fan is controlled via your motherboard's 5V ARGB header. Use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and synchronization with other ARGB components.

6. Manutenzione

Una manutenzione regolare garantisce prestazioni ottimali e longevità del dissipatore della CPU.

• Rimozione della polvere: Pulire periodicamente la polvere dalle alette del dissipatore e dalle pale della ventola utilizzando aria compressa o una spazzola morbida. Assicurarsi che la ventola non sia in funzione durante la pulizia.
• Ispezione della ventola: Check the fan for any signs of wear, damage, or excessive noise. Replace the fan if necessary.
• Pasta termica: While not frequently required, if you remove the heatsink for any reason, clean off the old thermal paste and apply a fresh layer before reinstallation.

7. Risoluzione Dei Problemi

If you encounter issues with your CPU cooler, refer to the following common solutions:

• Temperature elevate della CPU:
  • Ensure the heatsink is securely mounted and making good contact with the CPU.
  • Verificare che la pasta termica sia stata applicata correttamente e in modo uniforme.
  • Check fan speed settings in BIOS/UEFI; ensure the fan is spinning at an appropriate speed.
  • Pulire eventuali accumuli di polvere dalle alette del dissipatore di calore e dalle pale della ventola.
  • Assicurare un adeguato flusso d'aria all'interno del case del PC.
• Fan Not Spinning/No ARGB Lighting:
  • Check that the 4-pin PWM fan cable is securely connected to the CPU_FAN header.
  • Verify that the 3-pin ARGB cable is securely connected to a compatible 5V ARGB header.
  • Ensure ARGB lighting is enabled and configured correctly in your motherboard's software/BIOS.
  • Inspect cables for any damage.
• Rumore eccessivo della ventola:
  • Adjust fan speed settings in BIOS/UEFI to a lower RPM if temperatures allow.
  • Check for any obstructions or loose cables hitting the fan blades.
  • Assicurarsi che la ventola sia montata saldamente e non vibri.

8. Garanzia e supporto

be quiet! products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official be quiet! website. For technical support, product registration, or further assistance, please visit the be quiet! Store on Amazon o i loro canali di supporto ufficiali.