Manuale utente dello scanner laser wireless per codici a barre HDWR HD44

1. Introduzione

This manual provides comprehensive instructions for the safe and efficient operation of your HDWR HD44 Wireless Laser Barcode Scanner. Please read this manual thoroughly before using the device and retain it for future reference.

The HDWR HD44 wireless barcode scanner is designed for durability and comfort. Its ergonomic shape ensures convenient daily use. This scanner operates wirelessly using radio wave technology, providing freedom of movement within a 5-meter range via its USB receiver. An integrated memory allows storage of thousands of scanned codes for later transfer to a computer.

The scanner supports various 1D barcodes, including:

• EAN-13, EAN-8, UPC-A, UPC-E
• Codice 39, Codice 93, Codice 128
• Interleaved 2 of 5, ITF-14, Industrial 2 of 5, Matrix 2 of 5
• Codabar, Code 11, MSI/Plessey, UK/Plessey
• GS1 DataBar, GS1 DataBar Limited

Image 1.1: HDWR HD44 Wireless Laser Barcode Scanner, USB receiver, and charging cable.

2. Contenuto della confezione

Si prega di selezionare la casella per i seguenti elementi:

• HDWR HD44 Wireless Barcode Scanner
• Ricevitore USB
• Cavo di ricarica USB
• Manuale d'uso

Image 2.1: The HDWR HD44 Wireless Barcode Scanner.

3. Impostazione

3.1 Caricamento dello scanner

Before first use, fully charge the scanner. Connect the USB charging cable to the scanner's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show the charging status.

3.2 Collegamento del ricevitore USB

1. Individuare il ricevitore USB incluso nella confezione.
2. Plug the USB receiver into an available USB port on your computer or host device.
3. The system should automatically detect and install the necessary drivers. No manual driver installation is typically required.

Image 3.1: The USB receiver for wireless connection.

3.3 Accensione/Spegnimento

To power on the scanner, press and hold the trigger button for a few seconds until you hear a beep and the indicator light turns on. To power off, press and hold the trigger button again until the scanner powers down.

4. Istruzioni per l'uso

4.1 Scansione di base

1. Assicurarsi che lo scanner sia acceso e collegato al dispositivo tramite il ricevitore USB.
2. Puntare il raggio laser dello scanner sul codice a barre che si desidera scansionare.
3. Press the trigger button. A successful scan will be indicated by a beep and/or a change in the indicator light.
4. The scanned data will be transmitted to your connected computer as keyboard input.

Image 4.1: The HDWR HD44 scanner operating wirelessly.

4.2 Using Integrated Memory

The HDWR HD44 scanner features an integrated memory to store scanned barcodes when out of range or when direct transmission is not desired. To utilize this feature:

1. Scan barcodes as usual. The scanner will automatically store them if not connected or if configured for storage mode.
2. To transfer stored data, ensure the scanner is connected to your computer via the USB receiver.
3. Scan the 'Upload Data' configuration barcode (refer to the full user manual for specific configuration barcodes). The stored data will then be transmitted to your computer.

5. Manutenzione

5.1 Pulizia

Per mantenere prestazioni ottimali, mantenere pulito lo scanner. Utilizzare un panno morbido e asciutto per pulire l'esterno. Per la finestra di scansione, utilizzare un panno morbido e privo di lanugine leggermenteampPulire con un detergente delicato e non abrasivo. Non utilizzare prodotti chimici aggressivi o materiali abrasivi.

5.2 Cura della batteria

The scanner uses a Lithium-ion battery. To prolong battery life:

• Evitare di scaricare completamente la batteria frequentemente.
• Quando non si utilizza lo scanner per lunghi periodi, conservarlo in un luogo fresco e asciutto.
• Caricare regolarmente la batteria, anche se non viene utilizzata costantemente.

6. Risoluzione Dei Problemi

6.1 Lo scanner non risponde

• Ensure the scanner is charged. Connect it to the charging cable and a power source.
• Verify the scanner is powered on. Press and hold the trigger button.
• Check the USB receiver connection to your computer. Try a different USB port.

6.2 Codici a barre non scansionati

• Assicurarsi che il codice a barre sia pulito, integro e stampato in modo chiaro.
• Regolare la distanza e l'angolazione tra lo scanner e il codice a barre.
• Check if the barcode type is supported by the scanner (refer to Section 1: Introduction).
• Clean the scanner's optical window as described in Section 5.1.

6.3 Dati non trasmessi al computer

• Confirm the USB receiver is properly connected and recognized by the computer.
• Ensure the scanner is within the 5-meter wireless range of the receiver.
• If data was stored in memory, ensure you have initiated the data upload process (refer to Section 4.2).

7. Specifiche

8. Garanzia e supporto

8.1 Garanzia del produttore

The HDWR HD44 Wireless Laser Barcode Scanner comes with a Garanzia del produttore di 2 anniLa presente garanzia copre i difetti di materiali e fabbricazione in condizioni di normale utilizzo. Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.

8.2 Assistenza clienti

For technical assistance, troubleshooting, or warranty inquiries, please contact HDWR customer support through their official website or the retailer where the product was purchased. Please have your model number (HD44) and purchase details ready when contacting support.