Manuale di istruzioni per il telaio del letto in metallo MAF da 14 pollici King

1. Prodotto finitoview

The MAF 14 Inch King Metal Platform Bed Frame is designed to provide a sturdy and noise-free foundation for your mattress. Constructed from heavy-duty steel, it supports up to 3000 pounds and eliminates the need for a box spring. The frame features rounded corners for safety and offers significant under-bed storage space.

Immagine 1.1: Passoview of the MAF 14 Inch King Metal Platform Bed Frame.

2. Informazioni sulla sicurezza

• Capacità di peso: Non superare la capacità di peso massima di 3000 libbre.
• Montaggio: Ensure all bolts are securely tightened before use. Periodically check and retighten fasteners.
• Angoli arrotondati: The frame is designed with rounded corners to minimize injury from accidental contact.
• Protezione del pavimento: Rubber foot cushions are included to prevent floor damage and reduce noise.

3. Elenco delle parti

Verify that all components are present before beginning assembly. All necessary tools are included in the package.

• Sezioni del telaio metallico
• Gambe di supporto
• Lamelle in acciaio
• Mattress Slide Stoppers (Plastic Anti-Slip Baffles)
• Rubber Foot Cushions
• Ferramenta di montaggio (bulloni, rondelle, dadi)
• Strumento di assemblaggio (chiave inglese)

4. Istruzioni per l'installazione e il montaggio

Assembly typically takes approximately 20 minutes for one person. Follow these steps carefully:

1. Disimballare i componenti: Estrarre con cautela tutti i componenti dall'imballaggio e disporli su una superficie pulita e morbida per evitare graffi.
2. Assemblare le sezioni del telaio: Connect the main frame sections using the provided hardware. Do not fully tighten bolts until all sections are aligned.
3. Fissare le gambe di supporto: Securely attach the support legs to the frame. Ensure rubber foot cushions are properly seated on the bottom of each leg.
4. Installare le doghe in acciaio: Place the steel slats into the designated U-shaped grooves on the frame. The slats are designed to be fixed and prevent sliding.
5. Install Mattress Slide Stoppers: Attach the plastic anti-slip baffles to the frame. Ensure they are mounted outwards to effectively prevent the mattress from slipping.
6. Serraggio finale: Once all components are assembled and aligned, fully tighten all bolts using the provided wrench.

Image 4.1: Proper orientation for mattress slide stopper installation.

Image 4.2: Key features for assembly and stability.

5. Istruzioni per l'uso

• Posizionamento del materasso: Place your mattress directly onto the steel slats. A box spring is not required.
• Compatibilità del materasso: This King size frame is compatible with standard 80 x 76 inch mattresses.
• Spazio sotto il letto: The 14-inch height provides 12.4 inches of clearance for under-bed storage.

Image 5.1: Illustration of available under-bed storage space.

Image 5.2: Confirmation that no box spring is required.

6. Manutenzione

• Pulizia: Pulisci la struttura metallica con un pannoamp panno e detergente delicato secondo necessità. Evitare detergenti abrasivi.
• Controllo del dispositivo di fissaggio: Periodically inspect all bolts and connections to ensure they remain tight. Retighten if any looseness is detected.
• Riduzione del rumore: The frame is designed to be noise-free. If any squeaking occurs, check all connections and ensure the rubber foot cushions are intact.

7. Risoluzione Dei Problemi

• Issue: Mattress is sliding.
  Soluzione: Ensure the plastic anti-slip baffles are correctly installed and facing outwards. Verify that the mattress is properly centered on the frame.
• Issue: Frame is making noise (squeaking/rattling).
  Soluzione: Check all assembly bolts and tighten them securely. Ensure the rubber tips on the cross-rails are properly seated and the rubber foot cushions are in place.
• Problema: difficoltà durante il montaggio.
  Soluzione: Refer to the assembly instructions (Section 4). Do not fully tighten bolts until all parts are loosely assembled and aligned. If a part seems difficult to fit, double-check the orientation and part number against the manual.

8. Specifiche

Image 8.1: Key dimensions and weight capacity.

Image 8.2: Detailed size chart and contents.

9. Garanzia e supporto

This MAF metal bed frame comes with a 5-year after-sale service. For any questions, concerns, or assistance with your product, please contact MAF customer support. We are committed to providing a satisfactory solution.