Manuale utente della lanterna prefabbricata a LED Southwire T90150 da 150 W

Introduzione

The Southwire T90150 Prefab LED Overhead Lantern is designed for robust illumination in various environments. It features a custom wiring terminal for flexible power cord integration and includes strain relief connectors. The unit also incorporates ½” threaded hubs compatible with other Southwire fittings. A retractable handle facilitates ceiling mounting and allows for low-profile accatastamento.

Figura 1: Southwire 150W Prefab LED Overhead Lantern. This image displays the complete lantern unit, highlighting its robust construction, retractable handle, and the LED light array protected by a metal cage.

Informazioni sulla sicurezza

Leggere attentamente tutte le istruzioni prima dell'installazione e dell'uso. La mancata osservanza di queste istruzioni può causare scosse elettriche, incendi o lesioni gravi.

• Rischio elettrico: Ensure power is disconnected before wiring or servicing the unit. All wiring must comply with national and local electrical codes.
• Installazione professionale: L'installazione deve essere eseguita da un elettricista qualificato.
• Messa a terra corretta: Per evitare scosse elettriche, l'apparecchio deve essere adeguatamente messo a terra.
• Voltage Compatibilità: Verificare che il volume di fornituratage matches the fixture's requirements (120V - 227VAC).
• Evitare l'esposizione diretta degli occhi: The LED light is extremely bright. Avoid looking directly into the light source to prevent eye strain or temporary vision impairment.
• Temperatura di esercizio: Do not operate the fixture in environments exceeding its specified temperature range.
• Montaggio sicuro: Assicurarsi che l'apparecchio sia montato saldamente per evitare che cada.

Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• Southwire 150W Prefab LED Overhead Lantern (Model T90150)
• Steel strain relief connectors (2x)
• Manuale d'uso
• Note: Power cord is not included and must be supplied by the user.

Configurazione e installazione

This fixture requires user-supplied wiring for power. Follow these steps for safe and proper installation:

1. Preparare il cablaggio: Obtain a suitable power cord (12 gauge through 16 gauge SO Cord recommended) and, if desired, a female three-prong plug for daisy-chaining multiple lights. Cut and strip the wires as necessary.
2. Terminale di cablaggio di accesso: Unscrew the top section of the lantern to expose the internal wiring terminal.
3. Collegare il cavo di alimentazione:
   • Feed the power cord through one of the ½” threaded hubs.
   • Connect the stripped wires to the appropriate terminals within the fixture (Line, Neutral, Ground). Ensure connections are secure.
   • Use the provided steel strain relief connector to secure the power cord where it enters the fixture, preventing accidental dislodgement.
4. Collegamento a margherita (facoltativo): If connecting multiple lights, feed the female three-prong plug wiring through the second ½” threaded hub and connect it to the designated output terminals. Secure with a strain relief connector.
5. Secure Top Section: Carefully re-attach and screw the top section of the lantern back into place, ensuring no wires are pinched.
6. Montaggio: Use the retractable hanging clip/handle to securely mount the lantern overhead. Ensure the mounting point can support the fixture's weight (approximately 10.03 pounds).

Importante: The fixture does not include an on/off switch. Power control must be managed externally (e.g., via a wall switch or by plugging/unplugging the power cord).

Istruzioni per l'uso

The Southwire Prefab LED Overhead Lantern is designed for straightforward operation once installed.

1. Accensione: Connect the power cord to a compatible 120V - 227VAC power source. The light will illuminate.
2. Spegni: Disconnect the power cord from the power source or use an external switch to cut power to the fixture.
3. Funzione di attenuazione: Some models may feature a switch to toggle between 100% and 50% output. Refer to your specific model's labeling for this feature.

Nota: This lantern is extremely bright. Position it to avoid direct eye contact, especially when operating at full brightness.

Manutenzione

The Southwire LED Overhead Lantern requires minimal maintenance to ensure optimal performance and longevity.

• Pulizia: Scollegare l'alimentazione prima della pulizia. Utilizzare un panno morbido eamp panno per pulire l'esterno dell'apparecchio. Non utilizzare detergenti abrasivi o solventi.
• Ispezione: Periodically inspect the power cord and connections for any signs of wear, damage, or loose connections. Address any issues immediately.
• Magazzinaggio: When not in use, store the lantern in a dry, protected area. The retractable handle allows for low-profile accatastamento.
• LED: The LED light source is designed for long life and is not user-serviceable. Do not attempt to replace individual LEDs.

Risoluzione dei problemi

If you encounter issues with your Southwire LED Overhead Lantern, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Southwire customer support.

Specifiche

Garanzia e supporto

This Southwire product is covered by a Garanzia limitata di 1 anno dalla data di acquisto. Questa garanzia copre difetti di materiali e lavorazione in condizioni di normale utilizzo.

For warranty claims, technical support, or further assistance, please contact Southwire customer service. Refer to the official Southwire websito per le informazioni di contatto più aggiornate.

Southwire Official Websito: www.southwire.com