Introduzione
The Graco TurboBooster 2.0 Highback Booster Car Seat is designed to provide a secure and comfortable ride for your growing child. This 2-in-1 booster seat transitions from a highback booster to a backless booster, accommodating children aged 4-10, weighing 40-100 lbs, and up to 57 inches tall. It features Graco ProtectPlus Engineered safety, ensuring rigorous crash test performance for frontal, side, rear, and rollover impacts, along with testing for extreme car interior temperatures.
Informazioni importanti sulla sicurezza
Always read and follow all instructions and warnings provided with your car seat and in your vehicle owner's manual. Failure to properly install and use this car seat can result in serious injury or death. Ensure the car seat is appropriate for your child's weight, height, and age. Never leave a child unattended in the car seat. Regularly inspect the car seat for any damage or wear.
Configurazione e installazione
The Graco TurboBooster 2.0 is designed for straightforward assembly and installation. It can be used as a highback booster or converted to a backless booster.
Highback Booster Assembly
To assemble the highback booster, align the backrest with the booster base. The backrest features three hooks that slide into corresponding slots on the booster base. Lay the booster base backwards and slide the backrest hooks into the slots. Once aligned, flip the backrest up towards the seat until it locks securely into place. Ensure both parts are firmly connected before use.
Vehicle Installation (LATCH System)
The booster seat is equipped with metal clasps for attachment to your vehicle's LATCH (Lower Anchors and Tethers for Children) system. Locate the metal bars in the crease of your vehicle's back seat. To extend the LATCH straps, push the button on the front of the booster seat and pull the straps out. Attach the metal clasps to the vehicle's LATCH bars. Once attached, push the button on the front again and pull the strap to tighten the booster seat securely against the vehicle seat. Ensure there is no more than one inch of movement side-to-side or front-to-back at the belt path.
Operating the Booster Seat
The Graco TurboBooster 2.0 offers features designed for comfort and convenience as your child grows.
Poggiatesta regolabile
The headrest is fully adjustable to keep your growing child secure and comfortable. To adjust, locate the adjustment mechanism on the back of the highback. Move it up or down to ensure the vehicle's shoulder belt rests properly across your child's shoulder, not on their neck or off their arm.
Open-Loop Belt Guides
The booster seat features open-loop belt guides that help correctly position your vehicle's seat belt across your child's lap and shoulder. Ensure the lap belt is low on the hips, touching the thighs, and the shoulder belt is centered on the shoulder and chest.
Hide-Away Cup Holders and Snack Tray
The booster seat includes hide-away cup holders to keep drinks secure. Additionally, a pull-out tray is available for toys or snacks, providing convenience during travel.
Manutenzione
Maintaining your Graco TurboBooster 2.0 is simple to ensure its longevity and hygiene.
Pulizia del cuscino del sedile
The seat pad is machine-washable for easy cleaning. To remove the cover, unhook the various attachment points located on the underside and sides of the booster seat. Once removed, follow the washing instructions on the care label, typically using cold water on a delicate cycle and air drying. Reattach the cover by hooking it back into place.
Risoluzione dei problemi
If you encounter any issues with your Graco TurboBooster 2.0, consider the following common solutions:
- Installazione libera: Ensure the LATCH connectors are properly attached and the strap is pulled tight. The seat should not move more than one inch in any direction at the belt path.
- Improper Belt Fit: Adjust the headrest height to ensure the shoulder belt is centered on your child's shoulder. The lap belt should be low on the hips, touching the thighs.
- Difficulty Adjusting Headrest: Ensure no fabric or debris is obstructing the adjustment mechanism on the back of the highback.
For persistent issues, refer to the full instruction manual or contact Graco customer support.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Dimensioni del prodotto | 15 x 16.5 x 26.5 pollici |
| Numero modello articolo | 8E221DCA |
| Raccomandazione sul peso minimo | 40 libbre |
| Peso massimo raccomandato | 100 libbre |
| Altezza minima raccomandata | 43 pollici |
| Altezza massima raccomandata | 57 pollici |
| Tipo di materiale | Poliestere |
| Numero di posizioni reclinabili | 1 |
| Orientamento | Rivolto in avanti |
| Peso dell'articolo | 6 libbre |
Garanzia e supporto
The Graco TurboBooster 2.0 is designed for long-lasting use, suitable for children up to 10 years old within the specified weight and height limits. For detailed warranty information and customer support, please refer to the official Graco website or the warranty card included with your product. Always check local and state laws, as well as AAP and NHTSA recommendations, for car seat usage.
