1. Introduzione
Thank you for choosing the Akicon Range Hood Insert 48 Inch, Model 19IL. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new kitchen appliance. Please read all instructions carefully before use and retain this manual for future reference.

Immagine: Frontale view of the Akicon Range Hood Insert 48 Inch.
2. Informazioni sulla sicurezza
Per ridurre il rischio di incendi, scosse elettriche o lesioni, osservare quanto segue:
- Install this range hood in accordance with all local codes and ordinances.
- Always disconnect power to the range hood at the circuit breaker or fuse box before servicing.
- Assicurare una ventilazione adeguata per evitare il ritorno di gas di combustione provenienti da altri apparecchi che bruciano carburante.
- Clean grease filters frequently. Grease accumulation can lead to fire.
- Non lasciare mai incustodite le unità di cottura a fuoco alto. Le fuoriuscite di liquido possono causare fumo e fuoriuscite di grasso che potrebbero incendiarsi.
- Use appropriate size cookware on each surface unit.
3. Contenuto della confezione
Verificare che tutti gli articoli siano inclusi nel pacchetto:
- Cappa da incasso
- Viti di installazione
- Filtri deflettore
- Manuale di installazione
- LED Lights (extra 3pcs of 3000K warm Dimmable LED lights included)
4. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Informazioni sul modello | 19IL |
| Capacità del flusso d'aria | 1200 piedi cubi al minuto (CFM) |
| Materiale | Acciaio inossidabile |
| Livello di rumore | Less than 65 Decibels (at highest speed) |
| Tipo di montaggio | Built-In Mount / Insert Mount |
| Tipo di controlli | Premere il pulsante |
| Voltage | 120 Volt (CA) |
| Numero di velocità | 4 |
| Tipo di sorgente luminosa | LED (3pcs of 5500K, extra 3pcs of 3000K dimmable) |
| Tipo di filtro | Deflettore (lavabile in lavastoviglie) |
| Dimensioni del prodotto | 19 x 46.4 x 12.6 pollici (P x L x A) |
| Peso dell'articolo | 72.8 libbre |
| Certificazione | Certificato ETL |

Image: Dimensional diagram of the Akicon Range Hood Insert 48 Inch (Model NX-19IL-48).
5. Configurazione e installazione
Installation of the Akicon Range Hood Insert requires careful attention to detail and adherence to safety guidelines. It is recommended that installation be performed by a qualified professional.
5.1 Controlli pre-installazione
- Unpack the range hood and inspect for any shipping damage.
- Ensure all necessary components listed in Section 3 are present.
- Verify that the installation area meets the dimensional requirements shown in the specifications diagram.
- Confirm that the electrical supply matches the product specifications (120V AC).
5.2 Mounting the Insert
The range hood is designed for built-in or insert mounting. Refer to the detailed installation instructions provided in the separate Installation Manual included with your product for specific steps on cutting the opening, securing the unit, and connecting the ductwork.
A professional instruction manual and video are available to assist with installation. Please consult these resources for comprehensive guidance.
6. Istruzioni per l'uso
The Akicon Range Hood Insert features a user-friendly push-button control panel for easy operation of its functions.
6.1 Pannello di controllo Sopraview

Immagine: dettagliata view of the control panel and key features.
6.2 Regolazione della velocità della ventola
- Press the Power button to turn the fan on/off.
- Use the '+' and '-' buttons to cycle through the 4 fan speeds (1-4). The current speed will be displayed numerically.
- The 48-inch model offers a maximum airflow of 1200 CFM.
6.3 Dimmable LED Lights
- Press the Light button to turn the LED lights on/off.
- Press and hold the Light button for 3 seconds to adjust the brightness. There are four brightness levels available.
6.4 Delayed Automatic Shutdown
- While the fan is running, press and hold the '-' button for 3 seconds to activate the delayed shutdown timer.
- The display will flash a number (1-9), indicating minutes. Use the '+' and '-' buttons to set the desired delay time (1 to 9 minutes).
- Once set, the fan and lights will automatically turn off after the selected delay.
6.5 Video operativo
Video: This video demonstrates the operation of the control buttons for the Akicon 19IL Series Insert Range Hood, including power, speed adjustment, dimmable LED lights, and delayed automatic shutdown function.
7. Manutenzione
Una manutenzione regolare garantisce prestazioni ottimali e longevità della cappa.
7.1 Pulizia dei filtri deflettori
- The stainless steel baffle filters are dishwasher-safe and easily removable for cleaning.
- To remove, locate the handles on each filter, pull down slightly, and slide out.
- Clean filters in a dishwasher or by hand with warm, soapy water. Ensure they are completely dry before re-installing.
- After 30 hours of operation, the cleaning reminder indicator "C" will flash, signaling that the grease filters need cleaning. Press and hold the "+" button for more than 3 seconds in a non-operation status to eliminate the flashes and reset the timer.

Image: Dishwasher-safe baffle filters for easy cleaning.
7.2 Pulizia esterna
- Clean the exterior surfaces with a soft cloth and a non-abrasive stainless steel cleaner.
- Avoid using abrasive pads or harsh chemicals that could scratch or damage the finish.
8. Risoluzione Dei Problemi
If you experience issues with your range hood, consult the following common troubleshooting tips:
- La ventola non funziona: Check if the power cord is securely plugged in and if the circuit breaker is on. Ensure the power button on the control panel has been pressed.
- Scarsa aspirazione: Verify that the baffle filters are clean and properly installed. Check for any obstructions in the ductwork. Ensure the fan speed is set appropriately for cooking conditions.
- Le luci non funzionano: Check if the light button has been pressed. Ensure the LED lights are securely in place. If individual lights are out, they may need replacement.
- Rumore eccessivo: Ensure the unit is securely mounted and all screws are tightened. Check for any loose parts or obstructions in the fan blades.
For persistent issues, please contact Akicon Customer Support.
9. Garanzia e supporto
9.1 Informazioni sulla garanzia
This Akicon Range Hood Insert comes with a Garanzia limitata di 3 anniPer i termini e le condizioni complete, fare riferimento alla scheda di garanzia inclusa nella confezione.
9.2 Assistenza clienti
For any questions, problems, or missing parts, please contact Akicon Customer Service:
- Ore: 8 a.m. - 6 p.m. EST, Monday-Friday
- Chiamata: +1(302)213-4406
- E-mail: servizio@akiconshop.com
- Websito: WWW.AKICONSHOP.COM





