Introduzione
This manual provides detailed instructions for the safe and correct installation and operation of your PERLESMITH TV Wall Mounts, including the PSMTK1 Tilting Mount and the PSMFK7 Full Motion Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Informazioni importanti sulla sicurezza
AVVERTIMENTO: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Do not install on drywall alone. The mount must be secured to a single wood stud, solid concrete, or brick wall.
- Assicurarsi che la struttura della parete possa sostenere in modo sicuro il peso combinato del supporto e del televisore.
- Always use an assistant for lifting and positioning the television.
- Do not exceed the maximum weight capacity specified for each mount model.
- Controllare periodicamente tutti i collegamenti e gli elementi di fissaggio per assicurarsi che siano sempre saldi.
Contenuto della confezione
Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact PERLESMITH customer service.
PSMFK7 Full Motion TV Wall Mount Components
Image: The PSMFK7 full motion TV wall mount, showing the articulating arm, TV plate, wall plate, and small accessories like cable ties and a bubble level.
- Full Motion Wall Plate Assembly
- Staffe TV (x2)
- Kit di montaggio (viti, tasselli, rondelle varie)
- Livella a bolla
- Fascette per cavi
PSMTK1 Tilting TV Wall Mount Components
Image: The PSMTK1 tilting TV wall mount, showing the wall plate, TV brackets, and small accessories like cable ties and a bubble level.
- Tilting Wall Plate
- Staffe TV (x2)
- Kit di montaggio (viti, tasselli, rondelle varie)
- Livella a bolla
- Fascette per cavi
Configurazione e installazione
1. Controlli pre-installazione
- Verifica la compatibilità TV:
For PSMFK7: Fits most 26"-55" TVs up to 70 lbs (31.8 kg) with VESA patterns from 100x100mm to 400x400mm.
For PSMTK1: Fits most 23"-60" TVs up to 115 lbs (52 kg) with VESA patterns from 75x75mm to 400x400mm.
Image: Visual guide for PSMFK7 compatibility, indicating TV size range, weight capacity, and VESA mounting patterns.
- Identificare il tipo di muro: This mount is designed for installation on single wood studs, solid concrete, or brick walls. NON installare solo su cartongesso.
- Check for Cable Blockage: Ensure the TV's power and input ports will not be blocked by the mounting brackets.
2. Fissaggio delle staffe TV al televisore
- Posizionare con cautela il televisore a faccia in giù su una superficie morbida e pulita.
- Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes.
- Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are level and securely fastened.
3. Montaggio della piastra a parete
- Determine the desired height for your TV. Mark the drilling locations on the wall.
- Per l'installazione con montanti in legno: Use a stud finder to locate the center of a wood stud. Drill pilot holes (e.g., 7/32" or 5.5mm) at the marked locations. Secure the wall plate using lag bolts and washers.
- Per l'installazione su pareti in cemento/mattoni: Drill pilot holes (e.g., 3/8" or 10mm) at the marked locations. Insert concrete anchors into the holes. Secure the wall plate using lag bolts and washers.
- Use the included bubble level to ensure the wall plate is perfectly horizontal before tightening all fasteners.
4. Mounting TV to Wall Plate
- With an assistant, carefully lift the TV with the attached brackets.
- Hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the mount.
- For PSMFK7: Fissare il televisore al supporto utilizzando le viti di sicurezza o i meccanismi di bloccaggio forniti.
- For PSMTK1: Engage the locking mechanism with the quick release pull-down straps to secure the TV.
Image: Simplified installation steps for the PSMTK1 mount, illustrating how the TV brackets hook onto the wall plate and the use of the pull cord for locking and releasing.
Utilizzo del supporto TV
PSMFK7 Full Motion Mount Adjustments
Image: Demonstrates the PSMFK7 mount's flexibility, including tilting down 15 degrees, extending up to 19.17 inches, swiveling 180 degrees, and leveling +/-3 degrees.
- Regolazione dell'inclinazione: The mount features a +5°/-15° tilt range. Loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then tighten the knobs to secure.
- Regolazione della rotazione: The articulating arm allows for a +/-90° swivel. Gently push or pull the TV to the desired viewangolo di ing.
- Estensione/Retrazione: Extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile Aspetto.
- Regolazione del livellamento: After installation, you can make a +/-3° leveling adjustment to ensure the TV is perfectly horizontal.
PSMTK1 Tilting Mount Adjustments
- Regolazione dell'inclinazione: The PSMTK1 allows for a downward tilt. Loosen the tilt bolts on the side of the TV brackets, adjust the TV to the desired angle, and then tighten the bolts.
- Meccanismo di bloccaggio: Use the pull-down straps to engage or disengage the quick-release locking mechanism, securing the TV to the wall plate.
Manutenzione
- Controllare periodicamente tutte le viti e i bulloni per assicurarsi che siano ben serrati e sicuri.
- Pulire il supporto con un panno morbido e asciutto. Evitare l'uso di detergenti abrasivi o solventi.
- Ensure no cables are pinched or stressed by the mount's movement.
Risoluzione dei problemi
- La TV non è in piano: Use the leveling adjustment feature (PSMFK7) or re-adjust the tilt bolts (PSMTK1) and ensure the wall plate was installed level.
- Il supporto sembra allentato: Re-check all wall plate and TV bracket fasteners. Ensure they are tightened securely. If installed on a wood stud, confirm the lag bolts are fully engaged in the stud. If on concrete, ensure anchors are properly seated.
- Difficulty moving full motion mount: Check for any obstructions. Ensure all pivot points are free of debris. If the movement is too stiff or too loose, some joints may have adjustable tension screws (refer to specific model diagrams if available).
- Parti mancanti: Do not proceed with installation. Contact PERLESMITH customer support for replacement parts.
Specifiche
| Caratteristica | Supporto inclinabile PSMTK1 | PSMFK7 Full Motion Mount |
|---|---|---|
| Compatibilità con le dimensioni della TV | 23" - 60" | 26" - 55" |
| Capacità di peso | 115 libbre (52 kg) | 70 libbre (31.8 kg) |
| Compatibilità VESA | da 75x75mm a 400x400mm | da 100x100mm a 400x400mm |
| Tipo di movimento | Inclinare | Swivel, Tilt, Extension |
| Angolo di inclinazione | Adjustable downward tilt | +5° / -15° |
| Angolo di rotazione | N / A | +/-90° |
| Regolazione del livellamento | N / A | +/-3° |
| Estensione da parete | Basso Profile | Da 3.2" a 19.17" (da 8.1 cm a 48.7 cm) |
| Materiale | Acciaio legato | |
| Colore | Nero | |
| Tipo di montaggio | Montaggio a parete | |
Informazioni sulla garanzia
PERLESMITH products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your product or visit the official PERLESMITH websito. Conserva la ricevuta d'acquisto come prova d'acquisto.
Assistenza clienti
If you have any questions, require assistance with installation, or need replacement parts, please contact PERLESMITH customer support. Our team is available to help you.
- Websito: www.perlesmith.com (Hypothetical link, please replace with actual if available)
- E-mail: support@perlesmith.com (Hypothetical email, please replace with actual if available)
- Telefono: 1-800-XXX-XXXX (Hypothetical number, please replace with actual if available)
