Introduzione
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Electrolux LFP226S Built-in Telescopic Kitchen Hood. Please read these instructions carefully before using the appliance and keep them for future reference.
Informazioni importanti sulla sicurezza
Quando si utilizzano apparecchi elettrici, seguire sempre le precauzioni di sicurezza di base per ridurre il rischio di incendi, scosse elettriche e lesioni alle persone.
- Assicurarsi che l'apparecchio sia installato correttamente e messo a terra da una persona qualificata.
- Do not operate the hood if it is damaged or malfunctioning.
- Maintain a minimum distance between the hob and the lower part of the hood as specified in the installation section. For gas hobs, this is typically 650 mm, and for electric hobs, 420 mm.
- Pulire regolarmente i filtri antigrasso per prevenire rischi di incendio.
- Non flambare sotto la cappa aspirante.
- Assicurare un'adeguata ventilazione nella stanza quando la cappa viene utilizzata contemporaneamente ad apparecchi che bruciano gas o altri combustibili.
- Scollegare l'apparecchio dalla rete elettrica prima di qualsiasi operazione di pulizia o manutenzione.
Configurazione e installazione
The Electrolux LFP226S is a built-in telescopic kitchen hood designed for under-cabinet mounting. Proper installation is crucial for optimal performance and safety.
Dimensioni di installazione
Refer to the diagram below for precise measurements required for installation. Ensure sufficient space is available in your cabinet for the hood's dimensions.
Immagine: Detailed diagram showing the dimensions for installing the Electrolux LFP226S telescopic kitchen hood. Key measurements include the overall width (502mm), depth (265mm), and height (179mm). The ducting outlet has a diameter of 150mm. The diagram also indicates minimum clearance requirements from the cooking surface: 420mm for electric hobs and 650mm for gas hobs.
- Apertura dell'armadietto: The required opening in the cabinet for the hood body is approximately 502mm wide and 265mm deep.
- Canalizzazione: The hood features a 150mm diameter ducting outlet for exhaust. Ensure proper connection to an external ventilation system.
- Spazio libero minimo: Maintain a minimum distance of 420mm between the hood and an electric hob, and 650mm for a gas hob, to ensure safe operation and efficient extraction.
- Montaggio: The hood is designed for under-cabinet mounting. Secure it firmly according to the provided mounting points.
Istruzioni per l'uso
The Electrolux LFP226S features intuitive controls for fan speed and lighting.
Pannello di controllo
The control panel is located on the front of the hood, accessible when the telescopic section is pulled out.
Immagine: Un dettagliato view of the control panel for the Electrolux LFP226S kitchen hood. It features four push buttons: '2' for medium fan speed, '3' for high fan speed, '0|1' for turning the fan on/off at low speed, and a light bulb icon for controlling the hood's illumination.
- Controllo della velocità della ventola:
- Press '0|1' to turn the fan on at low speed (Speed 1). Press again to turn off.
- Press '2' for medium fan speed.
- Press '3' for high fan speed.
- To switch between speeds, simply press the desired speed button.
- Controllo della luce:
- Press the button with the light bulb icon to turn the hood lights on.
- Press the light bulb icon button again to turn the lights off.
- Funzione telescopica: Pull the front panel of the hood outwards to activate the telescopic function and expose the filters and controls. Push it back in to retract.
Manutenzione e pulizia
Regular maintenance ensures the longevity and efficiency of your kitchen hood. Always disconnect the power supply before performing any maintenance.
Pulizia dei filtri antigrasso
The hood is equipped with baffle filters designed to trap grease. These should be cleaned regularly, typically every 2-4 weeks depending on usage, to maintain optimal performance and prevent fire hazards.
Immagine: Un primo piano view of the metal baffle filters within the Electrolux LFP226S kitchen hood. The image highlights the mesh structure of the filters and a small handle or latch mechanism used for easy removal and reinstallation during cleaning.
- Rimozione: Locate the latch or handle on each filter. Pull or slide the latch to release the filter and carefully remove it.
- Pulizia: Wash the filters by hand in hot water with a mild detergent, or in a dishwasher on a low-temperature cycle. Ensure they are completely dry before reinstallation.
- Reinstallazione: Insert the dry filters back into their slots, ensuring they click securely into place.
Replacing Lights
The hood uses LED type light sources. If a light needs replacement, ensure the hood is disconnected from power.
Immagine: A detailed shot of the LED light panel integrated into the Electrolux LFP226S kitchen hood. The light is covered by a translucent diffuser, providing even illumination over the cooking area.
- Accesso: Carefully remove the light cover or diffuser.
- Sostituzione: Replace the faulty LED module with an original spare part from Electrolux or an authorized service center. Do not attempt to replace individual LED bulbs.
- Rimontaggio: Securely reattach the light cover.
Pulizia esterna
Clean the exterior surfaces of the hood with a soft cloth and a non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the silver finish.
Risoluzione dei problemi
Prima di contattare l'assistenza, verificare i seguenti problemi comuni e le relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il cofano non funziona. | Nessuna alimentazione elettrica. | Controllare che l'apparecchio sia collegato alla presa di corrente e che l'interruttore automatico sia acceso. |
| Scarse prestazioni di estrazione. | I filtri antigrasso sono intasati. | Pulire o sostituire i filtri antigrasso. |
| Scarse prestazioni di estrazione. | Ducting is blocked or improperly installed. | Check ducting for obstructions and ensure correct installation. |
| Le luci non funzionano. | Modulo LED difettoso. | Replace the LED module (refer to Maintenance section). |
| Rumore eccessivo durante il funzionamento. | Componenti allentati o installazione non corretta. | Ensure all mounting screws are tight and filters are correctly seated. |
If the problem persists after checking these points, please contact Electrolux customer service or a qualified technician.
Specifiche
Technical details for the Electrolux LFP226S Built-in Telescopic Kitchen Hood:
- Numero modello: LFP226S
- Tipo: Built-in Telescopic Kitchen Hood
- Colore: Argento
- Capacità del flusso d'aria: 330 m³/h (Cubic meters per hour)
- Livello di rumore: 65 decibel
- Tipo di controllo: Premere il pulsante
- Tipo di sorgente luminosa: GUIDATO
- Tipo di filtro: Baffle (Déflecteur)
- Tipo di montaggio: Under-cabinet (Montage sous armoire)
- Peso: 7 chilogrammi
- Produttore: Elettrolux
Garanzia e supporto
Specific warranty details are not provided in this document. For warranty information, technical support, or to order spare parts, please refer to the warranty card included with your product or visit the official Electrolux website. You may also contact Electrolux customer service directly.
Disponibilità di pezzi di ricambio: Information regarding the availability of spare parts is not available in the provided product data. Please contact Electrolux customer support for details.
