Introduzione
Thank you for choosing the Linkind Outdoor Solar Motion Sensor Light. This product is designed to provide efficient and reliable outdoor illumination for your garden, pathway, garage, or porch. Featuring 1000LM brightness, 24 high-power LEDs, dual color temperatures (3000K Warm White & 6500K Cool White), and three intelligent operating modes, these IP67 waterproof lights offer enhanced security and ambiance. Please read this manual carefully before installation and use to ensure optimal performance and longevity.
Image: The Linkind solar light installed, casting a warm glow on a garden path at night.
Informazioni sulla sicurezza
- Ensure the solar panel receives direct sunlight for at least 6-8 hours daily for optimal charging.
- Do not install the light near other strong light sources, as this may interfere with the motion sensor or automatic dusk-to-dawn operation.
- Mantenere il pannello solare pulito da polvere, sporco e detriti per mantenere l'efficienza di ricarica.
- This product is IP67 waterproof, designed to withstand various weather conditions, but avoid submerging it in water.
- Non tentare di smontare o modificare il prodotto, poiché ciò invaliderebbe la garanzia e potrebbe causare danni.
- Tenere fuori dalla portata dei bambini.
Contenuto della confezione
Controllare la confezione per assicurarsi che tutti i componenti siano presenti:
- Linkind Outdoor Solar Motion Sensor Light (x2)
- Picchetto di terra (x2)
- Wall Mounting Screws and Anchors (x2 sets)
- Manuale dell'utente (questo documento)
Caratteristiche del prodotto
- Alta luminosità: Equipped with 24 high-power LEDs, delivering up to 1000 lumens of bright illumination.
- Doppia temperatura di colore: Offers both 3000K Warm White and 6500K Cool White light options to suit different preferences and environments.
- Sensore di movimento: Advanced motion detection with a range of 3-8 meters and a 120° detection angle, ensuring light activates when needed.
- Tre modalità operative: Customizable lighting modes for various scenarios (details in Operating Instructions).
- Grado di impermeabilità IP67: Designed to withstand harsh weather conditions, including rain, snow, and extreme temperatures.
- Pannello solare ad alta efficienza: Monocrystalline silicon solar panel with a 22% conversion rate for fast and efficient charging.
- Installazione 2 in 1: Versatile design allows for both ground insertion and wall mounting.
- Angolo regolabile: Light head can be adjusted vertically by 90° and horizontally by 270° for precise lighting direction.
Image: Feature comparison highlighting Linkind's cool & warm white, motion sensor, 1800mAh battery, 1000 lumens, and monocrystalline silicon solar panel.
Image: The solar light demonstrating its IP67 waterproof, frostproof, and heatproof capabilities under a water splash.
Immagine: Un dettaglio view of the solar light's 24 LEDs and unique optical lens, emphasizing high charging efficiency and long illumination.
Image: A person and their dog walking past the solar light, illustrating its sensitive motion detection with a 3-8m range and 120° angle.
Configurazione e installazione
The Linkind solar light offers two installation options: ground insertion or wall mounting.
Inserimento a terra
- Seleziona la modalità: Before assembly, press the power button on the back of the light to select your desired operating mode (see Operating Instructions for details).
- Montare il supporto: Attach the light unit to the top part of the ground stake.
- Connetti Spikes: Connect the two spike sections of the ground stake together.
- Inserire nel terreno: Firmly insert the assembled light and stake into soft ground in a location that receives ample luce solare diretta.
Montaggio a parete
- Seleziona la modalità: Before assembly, press the power button on the back of the light to select your desired operating mode.
- Fissare il supporto: Use the provided screws and anchors to securely fix the wall mounting bracket to a desired wall or fence.
- Connect the Two Parts: Attach the light unit to the wall mounting bracket.
- Regola l'angolazione: Adjust the angle of the solar panel and light head to ensure optimal sunlight exposure and lighting direction.
Image: Visual instructions for both ground insertion and wall mounting methods.
Istruzioni per l'uso
The Linkind solar light features a single button to cycle through its three operating modes and to switch between warm and cool white light.
Modifica della temperatura del colore
To switch between 3000K Warm White and 6500K Cool White, premere a lungo il pulsante di accensione per 3 secondo.
Cycling Through Modes (Short Press)
- Modalità 1: Keeps dim light all night. The motion sensor does not react in this mode.
- Modalità 2: Dim light when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
- Modalità 3: Light is off when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
Image: Visual representation of the three lighting modes: always dim, dim with motion-activated bright, and off with motion-activated bright.
Manutenzione
- Pannello solare pulito: Pulire regolarmente il pannello solare con un panno morbido e asciutto.amp cloth to remove dust, dirt, or snow. A clean panel ensures maximum charging efficiency.
- Verifica il posizionamento: Periodically check that the light's location still receives adequate direct sunlight, especially after seasonal changes or new foliage growth.
- Ispezionare per danni: Occasionally inspect the light for any physical damage or loose connections.
- Batteria: The built-in Lithium-ion battery is designed for long life. Do not attempt to replace it yourself.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende di notte. | Esposizione insufficiente alla luce solare durante il giorno. Il pannello solare è sporco. Light is in "OFF" mode (Mode 3 without motion). La batteria è scarica. | Spostare la luce in una zona con maggiore luce solare diretta. Pulisci il pannello solare. Press the power button to cycle to Mode 1 or Mode 2. Allow 1-2 sunny days for the battery to fully charge. |
| Light flickers or has low brightness. | Partial charge of battery. Solar panel is partially obstructed or dirty. | Ensure full sunlight exposure for several hours. Pulire il pannello solare e rimuovere eventuali ostruzioni. |
| Il sensore di movimento non funziona. | Light is in Mode 1 (always dim). Il sensore è ostruito. Interferenza luminosa esterna. | Switch to Mode 2 or Mode 3. Clear any debris or objects blocking the sensor. Relocate the light away from other strong light sources. |
| Il colore della luce non cambia. | Pressione errata del pulsante. | Ensure you are long-pressing the power button for 3 seconds to switch between warm and cool white. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Collegamento |
| Numero di modello | LL1801131 |
| Sorgente luminosa | 24 LED |
| Flusso luminoso | 1000 lumen |
| Temperatura del colore | Bianco caldo 3000K e bianco freddo 6500K |
| Campo di rilevamento del sensore di movimento | 3-8 metri |
| Angolo di rilevamento del sensore di movimento | 120° |
| Grado di protezione IP | Grado di protezione IP67 |
| Fonte di alimentazione | Alimentato ad energia solare |
| Tipo di batteria | 1 agli ioni di litio (inclusa) |
| Efficienza del pannello solare | 22% Conversion Rate (Monocrystalline Silicon) |
| Materiale | Acrilonitrile Butadiene Stirene (ABS) |
| Dimensioni del prodotto (L x P x A) | 15.4 x 4.8 x 10.1 cm (6.06 x 1.89 x 3.98 pollici) |
| Peso dell'articolo | 600 g (1.32 libbre) |
Image: Detailed diagram illustrating the dimensions, adjustable angle, motion sensor, and PET surface layer of the solar light.
Garanzia e supporto
For warranty information and customer support, please refer to the product packaging or contact Linkind customer service directly through their official website or the retailer where the product was purchased. Please have your model number (LL1801131) and purchase details ready when contacting support.