Introduzione
This manual provides instructions for the proper installation, operation, and maintenance of your oneisall Replacement Pump for the PWF-001 Cat Water Fountain. Please read these instructions carefully before use to ensure optimal performance and longevity of the pump.
Image: The oneisall Replacement Pump, designed for the PWF-001 cat water fountain.
Compatibilità
This replacement pump is solo compatibile with the oneisall PWF-001 Cat Water Fountain (ASIN: B0BX6DTKVL). Ensure your fountain model matches for proper function.
Image: The replacement pump integrated into a cat water fountain, illustrating its intended use.
Contenuto della confezione
Il pacchetto include:
- 1 x High-quality oneisall Replacement Water Pump
Il volume applicabiletage for this pump is 100-240V.
Configurazione e installazione
- Ensure the cat water fountain is unplugged from the power source.
- Remove the old pump from the fountain.
- Place the new oneisall replacement pump into the designated slot within the fountain.
- Connect the pump's tubing to the fountain's water outlet.
- Ensure all connections are secure before adding water and plugging in the fountain.
Operazione
Once installed and the fountain is filled with water, plug in the power cable. The pump will begin circulating water. This pump is designed for ultra-quiet operation, with noise levels below 30 decibels.
Image: Close-up of the pump's LED light, which indicates water levels or operational status.
Manutenzione e pulizia
Regular cleaning of the pump is essential to extend its lifespan and maintain optimal performance. It is recommended to clean the pump every due settimane.
Procedura di pulizia:
- Scollegare la fontana dalla fonte di alimentazione.
- Rimuovere la pompa dalla fontana.
- Carefully remove the pump cover.
- Rimuovere il coperchio della girante.
- Remove the impeller (fan leaf).
- Clean all removed parts (pump cover, impeller cover, impeller, and housing) thoroughly with soap and warm water. Use a small brush if necessary to remove any debris or mineral buildup.
- Risciacquare accuratamente tutte le parti per rimuovere i residui di sapone.
- Reassemble the pump by reversing the steps. Ensure all parts are securely in place.
Immagine: Esploso view diagram illustrating how to disassemble the pump into its housing, sponge, fan leaf (impeller), and pump body for cleaning.
Note: Analysis of returned products indicates that 99% of pumps can be reused after proper cleaning.
Risoluzione dei problemi
- Pump not working or weak flow:
- Assicurarsi che il cavo di alimentazione sia collegato saldamente.
- Check for any kinks or blockages in the tubing.
- Perform a thorough cleaning of the pump as described in the Maintenance section. Debris or mineral buildup is a common cause of reduced performance.
- Verify the water level in the fountain is sufficient.
- Rumore eccessivo:
- Assicurarsi che la pompa sia completamente immersa nell'acqua.
- Check for any foreign objects caught in the impeller. Clean the pump thoroughly.
- Ensure the pump is properly seated in its designated area within the fountain.
Specifiche
| Marca | unoètutto |
| Numero di modello | PWF-001 (Replacement Pump) |
| Materiale | Plastica |
| Fonte di alimentazione | Elettrico con cavo |
| Vol. applicabiletage | 100-240 V |
| Livello di rumore | Meno di 30 decibel |
| Durata stimata | 1.5-2 years (with regular cleaning) |
| Dimensioni del prodotto (pompa) | 2.1"L x 1.45"W x 1.2"H (approximate, based on image) |
Image: Diagram illustrating the approximate dimensions of the replacement pump: 2.1 inches long, 1.45 inches wide, and 1.2 inches high.
Image: Visual representation of key pump features: IP68 waterproof rating, DC 5V power input, 20,000 hours lifetime motor, and 1.5W low power consumption.
Garanzia e supporto
The oneisall Replacement Pump comes with a Garanzia di 2 anno. For any questions, technical assistance, or warranty claims, please contact oneisall customer support. 24/7 support is available to assist you.
Per maggiori informazioni visita il negozio ufficiale oneisall: Negozio Oneisall
