PDP Gaming METAVOLT Dual Charging Station for Xbox Controllers

1. Introduzione

The PDP Gaming METAVOLT Dual Charging Station is designed to provide a convenient and efficient charging solution for your Xbox Series X|S and Xbox One wireless controllers. This station features magnetic ports for secure controller placement, micro-suction material for stability, and intelligent LED indicators with auto-dimming functionality to display charging status.

Image 1.1: PDP Gaming METAVOLT Dual Charging Station with two white Xbox controllers.

2. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• PDP Gaming METAVOLT Dual Charging Station
• 2 pacchi batterie ricaricabili
• 4 Battery Doors (2 for Xbox One controllers, 2 for Xbox Series X|S controllers)
• Cavo di ricarica USB

3. Istruzioni per l'installazione

1. Install Battery Packs and Doors:

   Remove the existing battery cover and any disposable batteries from your Xbox wireless controller. Insert one of the provided rechargeable battery packs into the controller's battery compartment. Select the correct battery door for your controller model (Xbox One or Xbox Series X|S) and snap it into place. Ensure the battery door is securely fastened.

   

   Image 3.1: Compatibility chart for Xbox controller models and battery doors.
2. Connetti alimentazione:

   Connect the supplied USB charging cable to the charging station and then to a compatible USB power source (e.g., Xbox console, USB wall adapter). The charging station's indicator lights may briefly illuminate.

3. Controllori di posizione:

   Gently place your Xbox controllers onto the charging station's magnetic ports. The magnetic connection will guide the controller into the correct position for charging. Ensure the controller makes full contact with the charging pins.

4. Funzionamento della stazione di ricarica

4.1 Charging Controllers

Once controllers are correctly placed on the charging station, the LED indicators on the front of the station will illuminate. The lights will animate while charging and become static when the controllers are fully charged. Each rechargeable battery pack provides up to 20 hours of gameplay per full charge.

Image 4.1: Placing an Xbox controller on the charging station.

Image 4.2: Two Xbox controllers charging on the station.

4.2 Caratteristiche principali

• Magnetic Ports: Ensure a secure and optimal connection for charging.
• Micro-Suction Base: The base features micro-suction material to keep the charging station stable on most surfaces.
• Cinematic Auto-Dimming Lights: LED indicators automatically adjust their brightness based on ambient light conditions, reducing distraction in dark environments.
• Indicatori di carica LED: Visually confirm charging status (animating for charging, static for fully charged).

5. Manutenzione

5.1 Pulizia

To clean the charging station, disconnect it from the power source. Use a soft, dry cloth to wipe down the surfaces. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the product. For the micro-suction base, gently wipe with a damp cloth to restore adhesion if it becomes dirty.

5.2 Cura della batteria

To maximize the lifespan of the rechargeable battery packs, avoid fully discharging them frequently. It is recommended to charge controllers when not in use. If storing the charging station for an extended period, ensure the battery packs are partially charged (around 50%) before storage.

6. Risoluzione Dei Problemi

• Il controller non si carica:
  • Ensure the charging station is connected to a working power source.
  • Verify that the controller is correctly seated on the magnetic charging port and making full contact with the charging pins.
  • Check that the rechargeable battery pack is properly installed in the controller and the correct battery door is used.
  • Try charging a different controller or using a different USB cable/power source to isolate the issue.
• Gli indicatori LED non funzionano:
  • Verificare che la stazione di ricarica sia alimentata.
  • Ensure controllers are properly placed on the charging ports.
  • The lights may auto-dim in bright environments; try moving the station to a darker area to see if they become visible.
• Charging Station Slides on Surface:
  • The micro-suction base may have accumulated dust. Clean the base gently with a damp cloth and allow it to air dry to restore adhesion.
  • Ensure the surface where the station is placed is clean and smooth.

7. Specifiche

8. Informazioni sulla garanzia

This product is covered by a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official PDP website or the warranty card included with your purchase. Proof of purchase may be required for warranty claims.

9. Assistenza clienti

For further assistance, technical support, or to inquire about replacement parts, please visit the official PDP support websito:

www.pdp.com/support

You may also find answers to frequently asked questions and additional resources on their websito.