1. Introduzione
Thank you for choosing the Flexson Floor Stand for your Sonos ERA 100 speakers. This stand is designed to position your Sonos ERA 100 speaker at the optimal listening height, enhancing your audio experience. It features integrated cable management and includes a power extension cable for flexible placement. This manual provides detailed instructions for assembly, installation, and maintenance to ensure safe and proper use.
Si prega di leggere attentamente il presente manuale prima di iniziare l'installazione e di conservarlo per riferimento futuro.
2. Informazioni sulla sicurezza
- Prima del montaggio, assicurarsi che tutti i componenti siano presenti e integri.
- Do not exceed the maximum weight capacity of the stand (designed specifically for Sonos ERA 100).
- Assemble the stand on a flat, stable surface to prevent tipping.
- Tenere le parti piccole lontano dalla portata dei bambini per evitare rischi di soffocamento.
- Route cables carefully to prevent tripping hazards and damage to the cables or speaker.
- If using on carpeted floors, ensure the adjustable spikes are securely engaged. For hard floors, use the rubber feet.
3. Contenuto della confezione
Verifica che tutti i seguenti componenti siano inclusi nel pacchetto:
- Floor Stand Base
- Vertical Stand Pole
- Piastra di montaggio dell'altoparlante
- Adjustable Carpet Spikes (4x)
- Piedini in gomma (4x)
- Cavo di prolunga di alimentazione
- Ferramenta di montaggio (viti, rondelle, chiave a brugola)
- Manuale di istruzioni
4. Installazione e assemblaggio
Follow these steps to assemble your Flexson Floor Stand:
4.1. Preparare la base
- Disimballare tutti i componenti e disporli su una superficie morbida e pulita per evitare graffi.
- Determine your floor type:
- Per carpeted floors: Screw the adjustable carpet spikes into the threaded holes on the underside of the base. Adjust them to ensure the stand is level and stable.
- Per pavimenti duri (wood, tile, laminate): Attach the rubber feet to the threaded holes on the underside of the base.
4.2. Assemble the Stand Pole
- Attach the vertical stand pole to the base using the provided screws and Allen key. Ensure it is securely fastened and upright.
4.3. Install the Speaker Mounting Plate
- Secure the speaker mounting plate to the top of the vertical stand pole using the designated hardware.
4.4. Cable Management and Speaker Placement
- Carefully route the Sonos ERA 100 power cable (and network cable if applicable) through the designated channel within the vertical stand pole.
- Connect the provided power extension cable to your Sonos ERA 100 speaker's power input. This allows for greater flexibility in speaker placement away from wall outlets.
- Place your Sonos ERA 100 speaker onto the mounting plate. Ensure it sits securely and is properly aligned.
- Connect the power extension cable to the speaker and route it neatly through the stand's cable management system down to the base.
- Connect the other end of the power extension cable to a wall outlet.
5. Istruzioni per l'uso
The Flexson Floor Stand is a passive accessory designed to optimize the placement of your Sonos ERA 100 speaker. Once assembled and the speaker is securely placed, no further operational steps are required for the stand itself.
- Optimal Listening Height: The stand positions your Sonos ERA 100 at the ideal height for seated listening, ensuring the best possible audio dispersion.
- Gestione dei cavi: Utilize the integrated cable channels to keep power and network cables tidy and out of sight, contributing to a cleaner aesthetic.
- Stabilità: Regularly check the stability of the stand, especially if it has been moved. Ensure the chosen feet (spikes or rubber) are appropriate for your flooring and provide a firm, level base.
6. Manutenzione
- Pulizia: Wipe the stand with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
- Ispezione: Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano ben serrati. Serrare nuovamente se necessario.
- Integrità del cavo: Inspect the power cable and extension cable for any signs of wear or damage. Replace immediately if damage is found.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il supporto è traballante o instabile. | Uneven floor surface; loose connections; incorrect feet for floor type. | Ensure all screws are tightened. Adjust carpet spikes or verify rubber feet are properly installed for your floor type. Move to a level surface. |
| Cables are not neatly routed. | Improper cable placement during assembly. | Re-route cables through the designated channels in the stand pole. Ensure no kinks or excessive bends. |
| Speaker does not sit flush on the mounting plate. | Cable interference; speaker not properly aligned. | Check that the speaker's power cable and any other connections are not obstructing the speaker from sitting flat. Realign the speaker carefully. |
8. Specifiche
- Marca: Flexson
- Numero modello: FLXE100FS2011EU
- Compatible Speaker: Sonos ERA 100
- Materiale: Acciaio e alluminio
- Colore: Bianco (come da variante del prodotto)
- Dimensioni (L x P x A): 81.3 x 21 x 28.5 cm (32 x 8.3 x 11.2 pollici)
- Peso: 4.67 kg (10.3 libbre)
- Caratteristiche: Integrated cable management, adjustable carpet spikes, rubber feet for hard floors, includes power extension cable.
9. Garanzia e supporto
Flexson products are designed and manufactured to high standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Flexson website. If you encounter any issues or require technical assistance, please contact Flexson customer support through their official channels.
For the latest support information and product registration, please visit: www.flexson.com
