1. Introduzione
This manual provides essential information for the installation, operation, and maintenance of your Morimoto XB LED Taillights. These taillights are designed to replace factory lighting systems in compatible Ford Superduty models from 2017-2021, offering enhanced illumination and visibility.
The Morimoto XB LED Taillights integrate LED chips for clear light output. They feature a bright red light for brake and tail functions, an intense white light for reverse, and distinct turn signals. Constructed from high-quality materials, these taillights are built for durability and are waterproof.
2. Compatibilità
These Morimoto XB LED Taillights (Model LF350) are specifically designed for:
- Tipo di veicolo: Ford Super Duty
- Anni modello: 2017-2021
- Tipo di vestibilità: Adattamento specifico del veicolo
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- Morimoto XB LED Taillight Assemblies (Left and Right)
- Installation Hardware (if applicable, though product is "Plug and Play")
- Manuale di istruzioni (questo documento)
Figure 3.1: Morimoto XB LED Taillight Assemblies (pair).
4. Configurazione e installazione
The Morimoto XB LED Taillights are designed for a "Plug and Play" installation, meaning no complex wiring modifications are typically required. However, basic automotive knowledge and tools are recommended.
4.1 Precauzioni di sicurezza
- Assicurarsi che l'accensione del veicolo sia spenta e che il freno di stazionamento sia inserito.
- Disconnect the vehicle's battery before starting any electrical work to prevent accidental short circuits.
- Indossare dispositivi di protezione individuale adeguati, come guanti e protezioni per gli occhi.
4.2 Passaggi di installazione
- Access Existing Taillights: Locate and remove any fasteners securing the factory taillight assembly. This typically involves screws or clips accessible from the outside or inside the truck bed.
- Scollegare il cablaggio: Carefully disconnect the electrical connector(s) from the back of the factory taillight assembly.
- Remove Factory Taillight: Gently pull the factory taillight assembly straight out from the vehicle.
- Connect Morimoto Taillight: Connect the wiring harness of the Morimoto XB LED Taillight to the vehicle's existing electrical connector. Ensure a secure and proper connection.
- Install Morimoto Taillight: Align the new Morimoto taillight assembly with the mounting points on the vehicle and push it firmly into place.
- Secure Taillight: Reinstall any fasteners removed in step 1 to secure the new taillight assembly.
- Ripetere per l'altro lato: Follow the same steps for the opposite side taillight.
- Ricollegare la batteria: Once both taillights are securely installed and connected, reconnect the vehicle's battery.
Figure 4.1: Morimoto XB LED Taillight installed on a Ford Superduty, showing the side profile.
Figura 4.2: Posteriore view of a Ford Superduty with Morimoto XB LED Taillights installed.
5. Istruzioni per l'uso
After installation, test all functions of the Morimoto XB LED Taillights to ensure proper operation.
- Luci posteriori: Activate your vehicle's headlights/parking lights. The taillights should illuminate with a red light.
- Luci dei freni: Depress the brake pedal. The red light in the taillights should intensify.
- Luci di retromarcia: Shift the vehicle into reverse. The white reverse lights should illuminate.
- Indicatori di direzione: Activate the left and right turn signals. The amber (or red, depending on regional variant/design) turn signal portion of the taillights should flash.
Figure 5.1: Morimoto XB LED Taillights illuminated, demonstrating their light output.
6. Manutenzione
Morimoto XB LED Taillights require minimal maintenance due to their durable construction and LED technology. Regular inspection and cleaning will help maintain their appearance and performance.
- Pulizia: Clean the lens with a soft cloth and mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the polycarbonate lens.
- Ispezione: Periodically check the taillights for any signs of damage, loose connections, or condensation inside the housing.
- Caratteristica impermeabile: The taillights are designed to be waterproof. Ensure the seals are intact and not compromised during installation or use.
7. Risoluzione Dei Problemi
If you encounter issues with your Morimoto XB LED Taillights, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Taillight not illuminating | Loose electrical connection, blown fuse, incorrect installation. | Check all electrical connections. Inspect vehicle's fuse box for a blown fuse related to taillights. Re-verify installation steps. |
| Luci tremolanti | Unstable electrical connection, voltage fluttuazioni. | Ensure connections are secure. Consult a professional automotive electrician if the issue persists. |
| Condensa all'interno della lente | Temperature changes, compromised seal. | Minor condensation may dissipate. If persistent or excessive, inspect the seal for damage. Contact support if the issue does not resolve. |
For issues not listed above or if solutions do not resolve the problem, contact Morimoto customer support.
8. Specifiche
| Attributo | Valore |
|---|---|
| Marca | Morimoto |
| Modello | XB (LF350) |
| Colore | Smoke Lens, Red/White Light Output |
| Usi specifici per il prodotto | Fanale posteriore |
| Tipo di servizio del veicolo | Car (Ford Superduty) |
| Caratteristica speciale | Impermeabile |
| Cosatage | 12.6 watt |
| Posizione della parte automatica | Posteriore |
| Materiale della lente | Policarbonato |
| Assemblaggio richiesto | NO |
| Peso dell'articolo | 14 libbre |
| Dimensioni del pacco | 22 x 19 x 7 pollici |
| Codice UPC | 840203396933 |
| Prima data disponibile | 10 aprile 2023 |
9. Garanzia e supporto
For information regarding product warranty, returns, or technical support, please refer to the official Morimoto webo contattare direttamente il servizio clienti. Conservare la prova d'acquisto per eventuali reclami in garanzia.
Morimoto Official Websito: www.morimotohid.com
Informazioni sui contatti: Fare riferimento al websito per i dettagli di contatto più aggiornati.
