Introduzione
Thank you for choosing nipify Solar Motion Sensor Outdoor Lights. These lights are designed to provide efficient, eco-friendly, and reliable illumination for your outdoor spaces. With advanced solar technology and intelligent motion sensing, they offer enhanced security and convenience for your garden, patio, fence, and more.
Figura 1: Oltreview of nipify Solar Motion Sensor Outdoor Lights (8-pack).
Caratteristiche del prodotto
- Solar Powered & Energy Saving: Equipped with 140 high-quality LED beads and 180° wide-angle lighting. Converts solar energy into electricity during the day and automatically lights up at night, saving electricity costs.
- 3 Lighting Modes & Motion Sensor: Built-in sensitive motion sensor with three selectable modes for various lighting needs.
- Impermeabile e resistente alle intemperie: Made of high-quality, durable ABS material with an LED protection screen, ensuring normal operation in various weather conditions.
- High-efficiency Solar Panel: Solar energy conversion rate increased to 22% for faster charging and longer illumination time.
- Senza fili e facile da installare: Simple, wire-free installation using provided screws, suitable for outdoor walls, gardens, patios, decks, garages, driveways, porches, and fences.
Figure 2: High-efficiency solar charging during the day and automatic illumination at night.
Figure 3: Waterproof and weather-resistant design for all-season use.
Contenuto della confezione
Controllare la confezione per assicurarsi che tutti i componenti siano presenti:
- nipify Solar Motion Sensor Outdoor Lights (8 units for 8-pack)
- Hardware di montaggio (viti e tasselli)
- Manuale d'uso
Guida all'installazione
Seguire questi passaggi per prestazioni ottimali:
- Scegli una posizione: Select a location that receives direct sunlight for at least 6-8 hours a day to ensure the solar panel can fully charge. Avoid areas under eaves, trees, or other obstructions that might block sunlight.
- Activate the Light and Set the Mode: Before installation, press the power button on the light to activate it and select your desired lighting mode (see "Operating Instructions" section for details on modes).
- Montare la luce: Use the provided screws and wall plugs to securely mount the light on a wall, fence, or other suitable surface. Ensure the light is stable and facing an area where motion detection is desired.
- Carica iniziale: Allow the solar light to charge for a full day (6-8 hours) in direct sunlight before its first use at night.
Figure 4: Step-by-step installation and initial setup.
Istruzioni per l'uso
The nipify Solar Motion Sensor Outdoor Lights feature 3 intelligent lighting modes. Use the mode button on the light to cycle through them:
Mode 1: Constant Light Mode
The light automatically turns on at a medium brightness level at night and turns off during the day. This mode provides continuous ambient lighting.
Modalità 2: Modalità sensore luce fioca
The light stays at a low brightness (dim light) when no motion is detected. When motion is detected, it switches to full brightness for approximately 20 seconds, then returns to dim light.
Mode 3: Sensor Light Mode
The light remains off when no motion is detected. When motion is detected, it turns on at full brightness for approximately 20 seconds, then turns off again.
Figure 5: Visual representation of the 3 lighting modes.
To change modes, press the button on the front of the light. Each press will cycle to the next mode.
Manutenzione
To ensure the longevity and optimal performance of your solar lights, follow these maintenance tips:
- Pulire il pannello solare: Pulire regolarmente il pannello solare con un panno morbido e asciutto.amp panno per rimuovere polvere, sporco, foglie o neve. Un pannello pulito garantisce il massimo assorbimento della luce solare e l'efficienza di ricarica.
- Ostacoli chiari: Periodically check that no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight from reaching the solar panel.
- Cura della batteria: While the internal battery is designed for long life, if the light's performance significantly degrades over several years, consider replacing the unit as the battery is not user-replaceable.
Risoluzione dei problemi
If you encounter issues with your nipify Solar Motion Sensor Outdoor Lights, refer to the table below:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende di notte. | Esposizione insufficiente alla luce solare durante il giorno. | Ensure the solar panel receives 6-8 hours of direct sunlight. Relocate if necessary. |
| Il pannello solare è sporco. | Pulisci la superficie del pannello solare con un panno morbido eamp stoffa. | |
| Light is not activated or in the wrong mode. | Press the power/mode button to activate the light and select the desired mode. | |
| Il sensore di movimento non funziona. | Il sensore è ostruito o sporco. | Ensure the sensor lens is clean and clear of obstructions. |
| Light is installed too high or too far from detection area. | Adjust installation height and position to optimize motion detection range. | |
| La luce rimane fioca o si spegne troppo velocemente. | Carica insufficiente. | Lasciare che la luce si carichi per un giorno intero alla luce diretta del sole. |
| Degrado della batteria nel tempo. | Consider replacing the unit if it's several years old and performance has significantly decreased. |
Specifiche
| Attributo | Dettaglio |
|---|---|
| Marca | nipificare |
| Numero di modello | NO/NA |
| Tipo di sorgente luminosa | LED (140 LED) |
| Colore chiaro | Bianco caldo |
| Fonte di alimentazione | Alimentato ad energia solare |
| Materiale | Acrilonitrile Butadiene Stirene (ABS) |
| Dimensioni del prodotto | 10 cm L x 5 cm P x 5 cm A |
| Peso dell'articolo | 2.4 libbre (per confezione da 8) |
| Caratteristica speciale | Sensore di movimento |
| Livello di resistenza all'acqua | Impermeabile |
| Solar Conversion Efficiency | 22% |
| Tipo di installazione | Montaggio a parete |
| Numero di articoli | 8 (per confezione da 8) |
Informazioni importanti sulla sicurezza
- Do not disassemble or modify the product. This may cause damage and void any warranty.
- Tenere il prodotto lontano dal fuoco o da alte temperature.
- Ensure the installation surface is sturdy enough to support the light.
- Do not stare directly into the LED lights when they are on, as this may cause eye strain.
- Al termine del suo ciclo di vita, smaltire il prodotto secondo le normative locali.
Garanzia e supporto
nipify is committed to providing high-quality products. For any questions, concerns, or support needs regarding your solar lights, please contact nipify customer service through the platform where you purchased the product or visit the official nipify store.
For more information and to explore other nipify products, please visit the nipify Store on Amazon.
