1. Introduzione
Thank you for choosing the Titan Classic Quartz Chronograph Watch, Model WTT90169NL01. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.
This watch features a precise quartz movement, a chronograph function for measuring elapsed time, and is designed with a dark teal green dial and a dark brown leather strap. It is water-resistant up to 50 meters.
2. Prodotto finitoview
Familiarize yourself with the main components of your Titan Classic Chronograph Watch.

Figura 2.1: Fronte view of the Titan Classic Quartz Chronograph Watch.

Figura 2.2: lato view che illustra la corona e i pulsanti del cronografo.
Componenti dell'orologio:
- Corona: Utilizzato per impostare l'ora.
- Spintori (A e B): Used to operate the chronograph function.
- Lancetta delle ore: Indica l'ora.
- Mano minuta: Indica il minuto.
- Small Second Hand: Continuous running second hand for timekeeping (located on a sub-dial).
- Lancetta dei secondi del cronografo: Large central second hand used for chronograph timing.
- Chronograph Minute Sub-dial: Misura i minuti trascorsi durante il funzionamento del cronografo.
- Quadrante secondario 24 ore: Indicates time in a 24-hour format, synchronized with the main time.
3. Impostazione
3.1 Impostazione dell'ora
- Pull the crown out to position 2 (the outermost position). The small second hand will stop.
- Rotate the crown to set the hour and minute hands to the desired time. Ensure the 24-hour sub-dial also reflects the correct AM/PM period.
- Per avviare l'orologio, riportare la corona in posizione 0 (posizione normale).
3.2 Regolazione del cinturino in pelle
The dark brown leather strap is designed for comfort and adjustability. To adjust, simply insert the buckle pin into the desired hole on the strap to achieve a snug yet comfortable fit on your wrist.
4. Funzionamento del cronografo
Your watch is equipped with a chronograph function to measure elapsed time.

Figure 4.1: Dial layout with chronograph sub-dials.
Funzioni cronografiche:
- Spintore A (in alto): Avvia e arresta il cronografo.
- Spintore B (in basso): Azzera il cronografo.
Come si usa:
- Inizio: Press Pusher A to start the chronograph. The large central second hand and the chronograph minute sub-dial will begin to move.
- Stop: Press Pusher A again to stop the chronograph. The elapsed time will be indicated by the chronograph second hand and the chronograph minute sub-dial.
- Reset: After stopping, press Pusher B to reset all chronograph hands to their zero positions.
- Tempo intermedio (tempo parziale): Questo modello non è dotato della funzione split-time.
5. Manutenzione
Proper care will help preserve the appearance and function of your watch.
5.1 Pulizia
- Pulire la cassa e il vetro dell'orologio con un panno morbido e asciutto.
- For the leather strap, avoid excessive moisture. If it gets wet, dry it gently with a soft cloth and allow it to air dry completely away from direct heat.
- Do not use chemical cleaners or abrasive materials, as these can damage the watch's finish.
5.2 Resistenza all'acqua

Figure 5.1: Case back indicating 50M Water Resistance.
- Your watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming, showering, or washing hands.
- Importante: Do not operate the crown or pushers while the watch is wet or submerged in water. This can compromise the water resistance.
- Avoid exposing the watch to hot water, steam, or sudden temperature changes, as this can damage the seals.
5.3 Sostituzione della batteria
The watch is powered by a quartz battery. When the battery runs low, the watch may stop or the second hand may skip. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and function.
5.4 Conservazione
Quando non indossi l'orologio, conservalo in un luogo fresco e asciutto, lontano dalla luce solare diretta, da temperature estreme e da forti campi magnetici.
6. Risoluzione Dei Problemi
Se riscontri problemi con il tuo orologio, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'orologio si è fermato o funziona in modo intermittente. | Batteria scarica. | Far sostituire la batteria da un orologiaio professionista. |
| L'ora non è corretta. | Time not set correctly or crown is not pushed in. | Refer to Section 3.1 to reset the time. Ensure the crown is fully pushed into position 0. |
| Le lancette del cronografo non si azzerano. | Richiede calibrazione. | This usually indicates a need for professional service. Contact Titan customer support. |
| Umidità o condensa all'interno del cristallo. | Compromised water resistance due to impact, aging seals, or operating crown/pushers underwater. | Seek immediate professional service to prevent further damage to the movement. |
For issues not listed here or if the suggested solutions do not resolve the problem, please contact Titan customer support or an authorized service center.
7. Specifiche
Key technical details for your Titan Classic Quartz Chronograph Watch.
| Caratteristica | Dettaglio |
|---|---|
| Marca | Titan |
| Numero di modello | WTT90169NL01 |
| Tipo di movimento | Quarzo |
| Tipo di visualizzazione | Analogico |
| Diametro della cassa | 42 millimetri |
| Materiale del cinturino | Pelle |
| Resistenza all'acqua | 50 metri (5 ATM) |
| Caratteristiche speciali | Chronograph, 24-Hour Sub-dial, Arabic Numerals |
| Peso dell'articolo | 200 grammi |
| Batterie | Included and Required (Standard Watch Battery) |
8. Informazioni sulla garanzia
Your Titan Classic Quartz Chronograph Watch is covered by a manufacturer's warranty. The specific terms and duration of the warranty are provided with your purchase documentation. Please retain your proof of purchase for warranty claims.
For detailed warranty information, including coverage and exclusions, please refer to the warranty card included in your watch packaging or visit the official Titan websito.
9. Supporto
Should you require assistance, service, or have any questions regarding your Titan watch, please contact Titan customer support.
- Ufficiale Websito: www.titan.co.in
- Assistenza clienti: Refer to the contact information provided in your watch packaging or on the official websito per numeri di telefono e supporto via e-mail.
- Centri di assistenza autorizzati: A list of authorized service centers can be found on the Titan websito.





