1. Introduzione
This manual provides essential information for the proper installation, operation, and maintenance of your AONBOY S3-SC Cat Fountain Pump. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
Image 1: AONBOY S3-SC Cat Fountain Pump. This image displays the compact design of the pump, featuring a blue LED light indicator and a USB power connector. The pump is designed for submersible use in pet water fountains.
2. Informazioni sulla sicurezza
- Alimentazione elettrica: For proper safety and to prevent damage, use only 5V/1A USB power adapters. Sovravoltage can damage the pump and pose a safety risk.
- Immersione in acqua: Questa pompa è progettata esclusivamente per uso sommergibile. Assicurarsi che sia completamente immersa nell'acqua durante il funzionamento.
- Disconnessione: Always unplug the pump from the power source before handling, cleaning, or performing any maintenance.
- Ispezione dei danni: Do not operate the pump if the power cord or pump housing is damaged. Contact customer support for assistance.
- Bambini e animali domestici: Keep the power adapter and cord out of reach of children and pets to prevent accidental damage or injury.
Image 2: Warning label on the product packaging. This label explicitly states the requirement for a 5V/1A USB power adapter to prevent overvoltage damage to the pump.
3. Contenuto della confezione
Verificare che tutti gli articoli siano presenti nel pacco:
- AONBOY S3-SC Cat Fountain Pump with LED Light
- USB Power Cable (integrated)
4. Caratteristiche del prodotto
- Luce LED integrata: The LED light illuminates when the pump is operational, assisting pets in locating the water source in low-light conditions.
- Funzionamento silenzioso: Designed for low noise output, operating at approximately 30dB, ensuring a peaceful environment for pets and owners.
- Efficienza energetica: Consumes 1.5 watts of power, powered via a standard USB socket.
- Enhanced Waterproofing: Features resin pouring seal technology for insulation, preventing leakage and water ingress to the motor.
- Flusso d'acqua efficiente: Provides a high flow rate with minimal power consumption, suitable for various pet fountain designs.
- Facile manutenzione: Designed for quick disassembly to facilitate regular cleaning.
5. Istruzioni per l'installazione
- Disimballare: Estrarre con cautela la pompa dalla confezione.
- Risciacquo: Rinse the pump and all fountain components thoroughly with clean water before first use.
- Posizione: Place the pump at the bottom of your cat water fountain's reservoir, ensuring it is stable and level.
- Collegare il tubo: Attach the fountain's water outlet tubing securely to the pump's nozzle.
- Riempi la fontana: Fill the fountain reservoir with water to the recommended maximum level, ensuring the pump is fully submerged.
- Collegamento elettrico: Connect the USB cable to a compatible 5V/1A USB power adapter (not included) and then plug the adapter into a wall outlet.
Image 3: The AONBOY S3-SC pump correctly installed within a stainless steel cat water fountain. The pump is submerged, and the water flow is visible.
6. Istruzioni per l'uso
Once properly set up and connected to power, the pump will begin to circulate water. The integrated LED light will illuminate, indicating that the pump is active. Ensure the water level in the fountain is always above the minimum mark to prevent the pump from running dry, which can cause damage.
7. Manutenzione
Regular cleaning is crucial for maintaining pump performance and extending its lifespan. It is recommended to clean the pump every 2 settimane.
- Scollegare l'alimentazione: Prima di pulire la pompa, scollegarla sempre dalla presa di corrente.
- Smontare: Remove the pump cover and the pre-filter sponge.
- Rimuovere la girante: Carefully remove the impeller from the pump body.
- Componenti puliti: Clean all removed parts (pump cover, pre-filter, impeller, and pump body interior) with a brush and clean water. Remove any hair, debris, or mineral deposits.
- Rimontare: Reassemble the pump components in reverse order, ensuring all parts are securely in place.
Image 4: Diagram illustrating the disassembly and cleaning process for the pump. It shows the pump body, impeller, and pump cover as separate components for maintenance.
8. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La pompa non funziona | No power; Impeller blocked; Low water level | Check power connection; Clean pump and impeller; Ensure sufficient water level. |
| Flusso d'acqua ridotto | Pump or filter clogged; Mineral buildup | Clean pump, impeller, and filter thoroughly; Descale if necessary. |
| La pompa è rumorosa | Impeller obstructed; Not fully submerged; Air in pump | Clean impeller; Ensure pump is fully submerged; Gently shake fountain to release trapped air. |
| La luce LED non è accesa | No power; LED malfunction | Check power connection; If pump works but LED doesn't, contact support. |
9. Specifiche
- Marca: Ragazzo AON
- Modello: S3-SC (S3 pump)
- Fonte di energia: Elettrico con filo (USB)
- Voltage: 1.5 Volts (Input: 5V/1A via USB adapter)
- Cosatage: 1.5 watt
- Materiale: Plastica
- Stile: Sommergibile
- Peso dell'articolo: Circa 4.6 once (0.13 chilogrammi)
- Altezza massima di sollevamento: 10.24 pollici
10. Garanzia e supporto
AONBOY provides a Servizio post-vendita di 2 anni for this product. If you experience any pump failure within this period, please contact AONBOY customer support for replacement or assistance. Please retain your proof of purchase for warranty claims.
For further inquiries or support, please visit the official AONBOY websito o contattare il servizio clienti tramite il rivenditore presso cui è stato acquistato il prodotto.