Manuale di istruzioni del kit di illuminazione a LED LIGHTAILING per LEGO 41757 Giardino Botanico

1. Prodotto finitoview

This LIGHTAILING LED Lighting Kit is designed to illuminate your LEGO 41757 Botanical Garden model, enhancing its visual appeal. The kit includes all necessary components for integration with your existing LEGO set.

1.1 Contenuto della confezione

• 1 x USB Light Kit
• 1 guida alle istruzioni
• 1 x Battery Box (Batteries not included)

Please note: The LEGO 41757 Botanical Garden model set is NOT included with this lighting kit.

2. Configurazione e installazione

Careful installation is crucial to avoid damaging the delicate wiring. Follow these steps for proper setup. Refer to the provided installation video for visual guidance.

2.1 Preparazione

• Ensure your LEGO 41757 Botanical Garden model is fully assembled.
• Prepare three AA batteries for the battery box, or a USB charger (voltage should be less than 5V).
• Unpack the light kit components gently. The wires are fine and should not be pulled or bent forcefully.

2.2 Passi iniziali

Begin by carefully disassembling specific sections of your LEGO model as indicated in the detailed instructions or video to integrate the lighting elements.

Image: The LIGHTAILING LED kit box, showing the included LED light kits, battery box, and installation guide.

For a comprehensive visual guide, please watch the official installation video:

2.3 Connecting the Lights

1. Identify the specific areas of your LEGO model where lights are to be installed, as per the instruction guide.
2. Carefully route the wires between LEGO bricks. Avoid pinching or sharply bending the wires.
3. Connect the LED lights to the designated connection points on the circuit board or battery box.
4. Ensure all connections are secure before reassembling any LEGO sections.

Image: A step-by-step illustration of routing the delicate wires through the LEGO structure during installation.

3. Istruzioni per l'uso

Once the lighting kit is fully installed, power it on to bring your LEGO Botanical Garden to life.

3.1 Accensione

• Utilizzo delle batterie: Insert three AA batteries into the battery box. Flip the switch on the battery box to the "ON" position.
• Utilizzo dell'alimentazione USB: Connect the USB cable from the light kit to a USB power source (e.g., a USB wall adapter, power bank, or computer USB port). Ensure the voltage è inferiore a 5 ​​V.

3.2 Enjoying Your Illuminated Model

The lights will illuminate the various sections of your Botanical Garden, highlighting details such as the dome, fountain, and interior plants.

Image: The LEGO 41757 Botanical Garden model fully illuminated by the LIGHTAILING LED kit, showcasing the vibrant lighting effects in a dark environment.

Immagine: Lato A view of the LEGO 41757 Botanical Garden, highlighting the warm interior lighting and the bright blue fountain light from the LED kit.

4. Manutenzione

To ensure the longevity and optimal performance of your LIGHTAILING LED Lighting Kit, follow these simple maintenance guidelines:

• Pulizia: Gently dust the LED components and wires with a soft, dry cloth. Avoid using liquids or abrasive cleaners.
• Sostituzione della batteria: If using batteries, replace all three AA batteries simultaneously when the lights dim or stop working.
• Cura del filo: Periodically check for any exposed or damaged wires. Handle the model with care to prevent accidental damage to the lighting components.
• Magazzinaggio: If storing the model for an extended period, disconnect the power source (remove batteries or unplug USB) to prevent battery drain or potential damage.

5. Risoluzione Dei Problemi

If you encounter any issues with your LIGHTAILING LED Lighting Kit, refer to the following common solutions:

5.1 Le luci non si accendono

• Controlla la fonte di alimentazione:
  • If using batteries, ensure they are correctly inserted and fully charged. Replace with new batteries if necessary.
  • If using USB, ensure the USB cable is securely connected to both the kit and a functional power source. Verify the USB power source is active.
• Controllare le connessioni: Ensure all light kit wires are securely connected to the battery box or circuit board.
• Voltage: If using a USB charger, confirm the voltage is less than 5V. Higher voltage can damage the lights.

5.2 Lights Are Dim or Flickering

• Livello della batteria: This often indicates low battery power. Replace the AA batteries.
• Collegamento allentato: Check all wire connections for any looseness.

5.3 Individual Lights Not Working

• Danni ai cavi: Inspect the wire leading to the non-functional light for any visible damage (e.g., cuts, pinches).
• LED Damage: The individual LED might be faulty. If multiple troubleshooting steps fail, contact customer support.

5.4 Contatta l'assistenza

If you are unable to resolve an issue using the troubleshooting steps above, please contact LIGHTAILING customer support for further assistance. Refer to the "Warranty and Support" section for contact details.

6. Specifiche del prodotto

7. Garanzia e supporto

LIGHTAILING is committed to providing high-quality products and customer service. If you have any questions or require assistance, please do not hesitate to contact us.

• Supporto via e-mail: support@lightailing.com
• Produttore: Shenzhenshi Duoliangdian Technology Co., Ltd
• Indirizzo dell'azienda: Saige New City, Sanlian Community, Jihua Street, Longgang District, Shenzhen, Guangdong, China

For more information, visit the official LIGHTAILING websito: www.lightailing.com