Manuale utente del tester per batteria auto KAIWEETS KVB01

Introduzione

The KAIWEETS KVB01 Car Battery Tester is a versatile diagnostic tool designed to assess the health and performance of 12V and 24V lead-acid batteries. It provides comprehensive analysis including State of Charge (SOC), State of Health (SOH), voltage, internal resistance, and performs loading, cranking, and charging tests.

This tester is compatible with various battery types, including ordinary flooded, VRLA, GEL, AGM, SLA, and SLI batteries. It is suitable for use with almost all automotive batteries found in SUVs, motorcycles, trucks, boats, golf carts, and lawnmowers.

Cosa c'è nella scatola

• 1 x KAIWEETS KVB01 Battery Tester
• 1 x Custodia per il trasporto
• 1 x Manuale utente
• 1 x 2M Test Leads
• 2 x Copper Clips

Impostare

1. Disimballare il tester: Carefully remove the KAIWEETS KVB01 Battery Tester and its accessories from the carrying case.
2. Rimuovere la pellicola protettiva: Peel off any protective film from the tester's screen and buttons.
3. Collegare i cavi di prova: The 2-meter long test leads are permanently attached to the tester. Ensure the red (positive) and black (negative) copper clips are securely connected to the corresponding battery terminals. The tester is powered directly by the car battery, requiring no internal batteries.

Istruzioni per l'uso

The KVB01 features a clear and concise navigation interface, making it user-friendly even for first-time users. Use the arrow buttons to navigate and the 'M ENTER' button to select options.

1. Prova della batteria

This test measures the voltage, internal resistance, State of Charge (SOC), and State of Health (SOH) of the car battery. It helps you know the status of your battery in advance before it dies.

1. Connect the tester to the battery terminals.
2. From the Main Menu, select "BATTERY TEST".
3. Choose the appropriate battery type (e.g., Flooded, VRLA, GEL, AGM, SLA, SLI) and standard (e.g., CCA, IEC, EN).
4. The tester will display the battery's condition, including SOC, SOH, VOLTS, CCA, and RES (internal resistance).
5. The tester will provide suggestions based on the measurement results (e.g., "GOOD", "ATTENTION", "REPLACE", "PLEASE CHARGE").

2. Prova di avviamento

This test analyzes the battery discharge performance by measuring the actual cranking voltage. It helps determine if the battery can provide sufficient power to start the engine.

1. Collegare il tester alla batteria.
2. From the Main Menu, select "CRANKING TEST".
3. Seguire le istruzioni sullo schermo per avviare il motore del veicolo.
4. The tester will display the dynamic voltage, cranking voltage, and compare it to the standard.

3. Loading Test

This test analyzes the generator performance under load. It helps ensure your vehicle's charging system can maintain proper voltage when accessories are active.

1. Collegare il tester alla batteria.
2. From the Main Menu, select "LOADING TEST".
3. Turn on vehicle loads (e.g., headlights, AC, radio) and increase engine speed to 2000-2500 RPM as prompted.
4. The tester will display dynamic voltage, volume minimotage, and compare it to the standard.

4. Prova di carica

This test analyzes the running status of the automobile charging system, including the alternator and voltage regolatore.

1. Collegare il tester alla batteria.
2. From the Main Menu, select "CHARGING TEST".
3. Follow the on-screen prompts to start the engine and maintain specific RPMs.
4. The tester will display dynamic voltage, volume massimotage, e volume minimotage, providing an assessment of the charging system's health.

Manutenzione

• Mantenere il tester pulito e asciutto. Pulire con un panno morbido e asciutto.amp panno se necessario.
• Store the tester in its provided carrying case when not in use to protect it from dust and damage.
• Ensure the copper clips are clean and free of corrosion for accurate readings.
• Avoid exposing the tester to extreme temperatures or direct sunlight for prolonged periods.

Risoluzione dei problemi

Specifiche

Garanzia e supporto

KAIWEETS provides 36 months of high-quality service and lifetime technical support for the KVB01 Battery Tester. For any questions or assistance with the product, please feel free to contact KAIWEETS customer service.

The tester incorporates reverse polarity protection to prevent internal circuit burnout if the leads are accidentally connected incorrectly, ensuring user safety.