Xnbada RC01RF Wireless 2.4G RF 4-Zone Single Color Remote Control User Manual

1. Introduzione

The Xnbada RC01RF is a wireless 2.4G RF remote control designed for single color LED strip lights. It offers 4-zone control, allowing you to manage multiple groups of LED strips independently or simultaneously. This remote features precise brightness adjustment and operates wirelessly up to 30 meters (98 feet), providing flexible control without complex wiring. It is compatible with Xnbada C01W, C01Z, and C01RF single color controllers.

2. Informazioni sulla sicurezza

• Leggere attentamente tutte le istruzioni prima dell'uso.
• Questo dispositivo è destinato esclusivamente all'uso in ambienti interni.
• Do not expose the remote control to moisture or extreme temperatures.
• Utilizzare solo batterie AAA come specificato. Assicurarsi della corretta polarità quando si inseriscono le batterie.
• Tenere fuori dalla portata dei bambini.
• Do not attempt to disassemble or repair the remote control. This will void the warranty.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• Xnbada RC01RF Wireless Remote Control (Single Color)
• Supporto per montaggio a parete
• Viti di montaggio (2x)

Image: The Xnbada RC01RF remote control shown with its included wall mount holder and two mounting screws.

4. Prodotto finitoview

The RC01RF remote control features an intuitive layout for easy operation of your single color LED strip lights. Below is a diagram illustrating the functions of each button.

Image: Diagram showing the Xnbada RC01RF remote control with labels for each button's function, including ON/OFF, brightness adjustment, and zone selection.

• Pulsante ON: Press to turn ON all linked devices.
• Pulsante SPENTO: Press to turn OFF all linked devices.
• Brightness Ring: Touch the slider to adjust brightness from 1% to 100%.
• Luminosità aumentata (☀): Premere per aumentare la luminosità.
• Luminosità ridotta (☁): Premere per diminuire la luminosità.
• Pulsante M: Cycles through dynamic modes (if supported by the connected controller for single color).
• Luminosità al 30%: Press to set brightness to 30%.
• Luminosità al 60%: Press to set brightness to 60%.
• Luminosità al 100%: Press to set brightness to 100%.
• S- Button: Decreases dynamic mode speed.
• S+ Button: Increases dynamic mode speed.
• Zone 1-4 Buttons: Press to select a specific zone for control. Press and hold to link/unlink a controller to that zone.

5. Impostazione

5.1 Installazione della batteria

The RC01RF remote control requires two AAA batteries (not included).

1. Individuare il coperchio del vano batterie sul retro del telecomando.
2. Far scorrere il coperchio per aprirlo.
3. Inserire due batterie AAA, assicurandosi della corretta polarità (+ e -).
4. Riposizionare il coperchio del vano batteria finché non scatta in posizione.

5.2 Associazione del telecomando a un controller

The RC01RF remote control uses 2.4G RF technology for a fast and direct connection to compatible controllers (e.g., C01W, C01Z, C01RF) without requiring Wi-Fi, Bluetooth, or an app.

1. Ensure your LED strip controller is powered off.
2. Power on the LED strip controller.
3. Within 3 seconds of powering on the controller, press and hold one of the Zone buttons (1, 2, 3, or 4) on the RC01RF remote control.
4. If pairing is successful, the connected LED strip will flash three times. This indicates the controller is now linked to the selected zone on your remote.
5. Repeat this process for other controllers if you wish to assign them to different zones (1-4). Each zone can control multiple controllers.

To unlink a controller from a zone, power cycle the controller, and within 3 seconds, press the corresponding Zone button 5 times quickly. The LED strip will flash 10 times to confirm unlinking.

5.3 Installazione a parete

The included wall mount holder allows for convenient storage and access to your remote control.

1. Choose a suitable location on a wall or flat surface.
2. Use the wall mount holder as a template to mark the positions for the two mounting screws.
3. Se necessario, praticare dei fori pilota.
4. Secure the wall mount holder to the surface using the provided screws.
5. Inserire il telecomando nel supporto.

Image: The Xnbada RC01RF remote control shown securely placed in its wall-mounted holder, demonstrating flexible placement options.

6. Istruzioni per l'uso

6.1 Basic Control (All Zones)

• Accendi / spegni: Premere il tasto ON button to turn on all linked lights. Press the SPENTO button to turn off all linked lights.
• Regolazione della luminosità: Tocca il Anello di luminosità to smoothly adjust the light intensity from 1% to 100%. Alternatively, use the Aumento luminosità (☀) E Luminosità ridotta (☁) buttons for incremental adjustments.
• Preset Brightness: Use the dedicated buttons to quickly set brightness to 30%, 60%, O 100%.

Image: An illustration demonstrating brightness adjustment using the remote control in a kitchen setting, showing a slider for precise control.

6.2 4-Zone Group Control

The RC01RF remote allows you to control up to four independent zones of single color LED strip lights.

• Seleziona una zona: Premere il desiderato Zone button (1, 2, 3, or 4) to select that zone. Once selected, any commands (ON/OFF, brightness) will only apply to the controllers linked to that specific zone.
• Controlla tutte le zone: To control all linked zones simultaneously, ensure no specific zone button is actively selected (or press the currently active zone button again to deselect it, if applicable, or simply use the master ON/OFF).
• Auto-Transmission: The remote control utilizes an auto-transmission feature. If a controller is within 30 meters of another controller, the signal can be transmitted, extending the effective control distance for larger installations.

Image: Diagram illustrating the simultaneous auto-transmission feature, where the remote signal is relayed between controllers within a 30-meter range, extending control distance.

6.3 Dynamic Modes (if applicable)

If your connected single color controller supports dynamic modes (e.g., flashing, fading effects), you can activate them:

• Premere il tasto Pulsante M. to cycle through available dynamic modes.
• Utilizzare il S- E S+ buttons to decrease or increase the speed of the selected dynamic mode.

7. Manutenzione

7.1 Sostituzione della batteria

When the remote control's range decreases or it becomes unresponsive, it may be time to replace the batteries.

1. Per aprire il vano batteria, seguire i passaggi indicati nella Sezione 5.1.
2. Rimuovere le vecchie batterie AAA.
3. Inserire due batterie AAA nuove, rispettando la polarità corretta.
4. Chiudere il vano batterie.

Smaltire le batterie usate secondo le normative locali.

7.2 Pulizia

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

8. Risoluzione Dei Problemi

9. Specifiche

Image: A visual representation of various compatible Xnbada LED controllers, including C01W, C02W, C03W, C04W, C05W, WB5, FUT037, C01Z, C02Z, C03Z, C04Z, C05Z, LM051, and LM053.

10. Garanzia e supporto

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xnbada store on Amazon:

Xnbada Official Store

If you encounter any issues not covered in this manual, please contact Xnbada customer service for assistance.