HOMPOW G90

HOMPOW G90 Car Jump Starter User Manual

Modello: G90

Introduzione

The HOMPOW G90 Car Jump Starter is a powerful and versatile device designed to jump start 12V vehicle batteries, including all gas engines and diesel engines up to 10L. Beyond its primary function, it also serves as a 20000mAh power bank with fast-charging capabilities and features an integrated LED flashlight for various utility purposes. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your device.

HOMPOW G90 Car Jump Starter with accessories including smart jump cable, USB cables, AC adapter, and carrying case.

Image: The HOMPOW G90 Car Jump Starter unit, smart jump cables, various charging cables, an AC adapter, and a protective carrying case.

Informazioni importanti sulla sicurezza

Si prega di leggere attentamente tutte le avvertenze e le istruzioni di sicurezza prima di utilizzare questo prodotto. Il mancato rispetto di queste istruzioni può causare scosse elettriche, incendi e/o lesioni gravi.

  • This unit is designed for jump starting 12V car batteries only. Do not attempt to jump start vehicles with a higher battery rating or different voltage.
  • Do not try to restart the vehicle after three consecutive attempts if it doesn't start immediately. Wait for 1 minute to allow the unit to cool down.
  • Check your vehicle for other possible reasons why it cannot be restarted if the jump starter does not work.
  • For the first use, ensure the unit is fully charged.
  • In normal use, confirm the unit has at least 50% power before attempting a jump start.
  • The device incorporates 10 smart safety protections including reverse polarity, reverse charging, over-discharge, overcharging, reverse connection, short circuit, overheating, overload, spark resistance, and AI-Software Protection.
  • Tenere il dispositivo lontano da acqua, umidità e temperature estreme.
  • Non smontare o modificare l'unità.
Diagram illustrating 10 smart safety protections of the HOMPOW G90 jump starter.

Image: Visual representation of the 10 smart safety protections, including No-Spark, Over-Charge, Reverse-Connection, Short-Circuit, Reverse-Polarity, Low-Temp, High-Temp, Over-Voltage, Over-Load, and AI-Software Protection.

Cosa c'è nella scatola

Upon opening your HOMPOW G90 Car Jump Starter package, you should find the following items:

  • 1 x HOMPOW G90 Car Battery Jump Starter Unit
  • 1 x Extended Heavy-Duty Jumper Cable (Smart Jump Cable)
  • 1 cavo da USB-A a USB-C
  • 1 cavo da USB-C a USB-C
  • 1 adattatore CA da 18 W
  • 1 x Custodia per il trasporto
  • 1 x Manuale utente (questo documento)
Contents of the HOMPOW G90 Car Jump Starter box, including the main unit, smart cables, charging cables, AC adapter, and carrying case.

Image: All components included in the HOMPOW G90 Car Jump Starter package, neatly arranged with their respective labels.

Prodotto finitoview e specifiche

The HOMPOW G90 is a compact yet powerful device designed for emergency vehicle starting and portable power needs.

Caratteristiche principali:

  • Potente avviatore di emergenza: 4000 Amps Peak Current, capable of starting 12V vehicles with all gas engines and up to 10L diesel engines. Can perform approximately 60 jump starts on a single charge.
  • Power Bank da 20000 mAh: Equipped with 3 USB outputs (including one Type-C Quick Charge PD 60W port) to charge smartphones, tablets, and laptops up to 75% faster.
  • 60W Max Two-way Fast Charging: Bidirectional Type-C input/output port (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A) allows for a full charge in as little as 1.5 hours with a compatible 60W charger (18W AC adapter included, takes approx. 4.5 hours).
  • Super Large LED Screen: A 3.2-inch LED screen intuitively displays the unit's current working status and battery level.
  • Torcia a LED: Features 3 modes: Flashlight, Strobe Light, and SOS Light, useful for emergencies, camping e attività all'aperto.
Detailed diagram of the HOMPOW G90 jump starter highlighting its components and ports, including the power button, LED screen, USB outputs, Type-C port, LED light, and jump start output.

Image: An annotated diagram showing the various parts and functions of the HOMPOW G90 unit, such as the Power Button, Super Large LED Screen, USB Outputs, PD 60W Type-C Output/Input, LED Light, and Jump Start Output.

Specifiche tecniche:

SpecificazioneValore
MarcaHOMPOW
Numero di modelloG90
Corrente di uscita di picco4000 Amps
Capacità della batteria20000mAh (approx. 96.2 Wh)
Dimensioni del prodotto8.9"H x 3.7"L x 1.6"P
Peso dell'articolo1.5 libbre (circa 1.53 libbre)
Ingresso/uscita (tipo C)PD 60W (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A)
Uscita USB 15V/2.1A
Uscita USB 2 (QC3.0)5V/3A, 9V/2A, 12V/1.5A
Temperatura di esercizioDa -4°C a 140°C (da -20°F a 60°F)
Image showing the dimensions of the HOMPOW G90 jump starter compared to a laptop.

Image: The HOMPOW G90 unit displayed next to a laptop, illustrating its compact dimensions of 8.9 inches in length, 3.8 inches in width, and 1.7 inches in depth.

Configurazione e ricarica iniziale

Before first use, it is crucial to fully charge your HOMPOW G90 unit to ensure optimal performance and battery longevity.

  1. Connect the provided USB-C to USB-C cable or USB-A to USB-C cable to the Type-C input/output port on the jump starter.
  2. Connect the other end of the cable to the included 18W AC adapter.
  3. Collegare l'adattatore CA a una presa a muro standard.
  4. The LED screen will display the charging progress. Allow the unit to charge until it reaches 100%.
  5. A full charge with the included 18W AC adapter takes approximately 4.5 hours. For faster charging, use a compatible PD 60W charger (not included), which can fully charge the unit in about 1.5 hours.

Nota: Always ensure the unit has at least 50% charge before attempting to jump start a vehicle for reliable operation.

Istruzioni per l'uso

A. Avviamento di emergenza di un veicolo

This unit is designed for jump starting 12V car batteries only (all gas engines, up to 10L diesel engines).

  1. Ensure the HOMPOW G90 unit has at least 50% charge.
  2. Spegnere il motore del veicolo e tutti gli accessori (fari, radio, ecc.).
  3. Collegare il rosso (+) clamp del cavo di avviamento intelligente al terminale positivo (+) della batteria del veicolo.
  4. Collegare il nero (-) clamp del cavo di avviamento intelligente al terminale negativo (-) della batteria del veicolo.
  5. Insert the blue plug of the smart jump cable into the jump start output port on the HOMPOW G90 unit. Ensure it is fully inserted.
  6. The LED screen on the jump starter will indicate readiness. If there are any errors (e.g., reverse polarity), the unit's safety features will prevent operation, and the screen will display a warning.
  7. Avviare il motore del veicolo.
  8. Once the vehicle starts, immediately disconnect the smart jump cable from the HOMPOW G90 unit.
  9. Quindi, scollegare il cl nero (-)amp dalla batteria del veicolo, seguito dal polo rosso (+)amp.

Importante: If the vehicle does not start immediately, wait for 1 minute before the next attempt. Do not try to restart the vehicle after three consecutive attempts as this may damage the unit. If the vehicle still doesn't start, consult a mechanic to check for other issues.

HOMPOW G90 jump starter connected to a car battery, ready to jump start.

Image: The HOMPOW G90 jump starter unit with its smart cables connected to a car battery, demonstrating its use for starting dead batteries.

B. Using as a Power Bank

The HOMPOW G90 can charge various electronic devices via its USB output ports.

  • Connect your device's charging cable to one of the USB output ports (USB 1, USB 2/QC3.0, or Type-C PD 60W) on the jump starter.
  • The unit will automatically begin charging your device. The LED screen will show "OUT" indicating power output.
  • Puoi caricare fino a tre dispositivi contemporaneamente.
HOMPOW G90 jump starter charging multiple electronic devices simultaneously.

Image: The HOMPOW G90 unit connected via cables to a smartphone, tablet, and laptop, demonstrating its capability as a 20000mAh power bank with 60W fast charging.

C. Using the LED Flashlight

The integrated LED flashlight offers three modes for different situations.

  • To turn on the flashlight, press and hold the power button for a few seconds.
  • Press the power button briefly to cycle through the modes:
    1. Flashlight (steady illumination)
    2. Strobe Light (rapid flashing)
    3. SOS Light (Morse code for SOS)
  • To turn off the flashlight, press and hold the power button again.
HOMPOW G90 jump starter's LED flashlight demonstrating its three modes: flashlight, strobe, and SOS, with exampmeno di casi d'uso.

Image: The HOMPOW G90 unit's LED flashlight in operation, showcasing its Flashlight, Emergency Strobe, and SOS modes, along with illustrative scenarios like camping, rescue lighting, outdoor trips, and emergency lighting.

Manutenzione

Proper maintenance ensures the longevity and reliability of your HOMPOW G90 jump starter.

  • Ricarica regolare: To maintain battery health, it is recommended to fully charge the unit every 3-6 months, even if not in use.
  • Magazzinaggio: Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided carrying case for protection.
  • Pulizia: Pulire l'unità con un panno morbido e asciutto. Non utilizzare prodotti chimici aggressivi o detergenti abrasivi.
  • Cura del cavo: Inspect the smart jump cables for any damage (frayed wires, cracked insulation) before each use. Replace if damaged.

Risoluzione dei problemi

If you encounter issues with your HOMPOW G90, refer to the following common problems and solutions:

ProblemaPossibile causaSoluzione
L'unità non si accende.La batteria è completamente scarica.Charge the unit fully using the provided AC adapter or a PD 60W charger.
Il veicolo non si avvia dopo il tentativo di avviamento.Unit charge too low; incorrect connection; vehicle battery severely damaged; other vehicle issues.Ensure unit has >50% charge. Check cable connections (red to +, black to -). Wait 1 minute between attempts. If still no start after 3 attempts, consult a mechanic.
LED screen displays an error.Reverse polarity, short circuit, or other safety protection triggered.Disconnetti clamps and re-check connections. Ensure correct polarity. If error persists, contact customer service.
Dispositivi che non si caricano tramite porte USB.Batteria dell'unità scarica; cavo errato; dispositivo non compatibile.Charge the unit. Try a different USB cable. Ensure your device is compatible with the output specifications.

Assistenza clienti

For any questions, concerns, or technical assistance regarding your HOMPOW G90 Car Jump Starter, please do not hesitate to contact our customer service team. Refer to the contact information provided on the product packaging or the official HOMPOW websito.

Ci impegniamo a fornire un supporto eccellente e a garantire la vostra soddisfazione con i nostri prodotti.

Documenti correlati - G90

Preview Manuale operativo Xiegu DE-19: Guida all'interfaccia e al cablaggio
Manuale operativo dettagliato per l'adattatore di espansione esterno Xiegu DE-19, che copre le specifiche dell'interfaccia, il cablaggio dell'applicazione e l'elenco di imballaggio per il collegamento delle radio Xiegu (G90, G106) con alimentazione amplificatori (XPA125B).
Preview Adattatore USB esterno XIEGU DE-19: diagrammi di collegamento e guida all'installazione del software
Scheda tecnica dell'adattatore USB esterno XIEGU DE-19, con schemi di collegamento per G90, G90S, G106, G106C, X5105 e XPA125B, insieme alle istruzioni di configurazione del software di controllo per PC per JTDX e OmniRig.
Preview Guida di riferimento rapido Genesis G90
Una guida di riferimento rapido e completa per la Genesis G90, che copre caratteristiche, comandi, infotainment, sistemi di assistenza alla guida e informazioni sulla manutenzione.
Preview Genesis G90 Getting Started Guide: Audio, Connectivity, and Navigation Features
Explore the Genesis G90's advanced features with this comprehensive getting started guide. Learn about phone projection, Bluetooth pairing, voice commands for navigation and calls, driver assistance systems, and infotainment settings.
Preview Manuale operativo del ricetrasmettitore portatile HF SDR Xiegu G90
Manuale operativo completo per il ricetrasmettitore portatile HF SDR Xiegu G90 da 20 W. Illustra caratteristiche, controlli, display LCD, specifiche e connettività per gli appassionati di radioamatori.
Preview Manuale utente dell'adattatore di espansione dell'interfaccia dati Xiegu DE-19
Scopri l'adattatore di espansione dell'interfaccia dati Xiegu DE-19, un accessorio versatile per il controllo da PC e la comunicazione dati con le radio HF Xiegu G90, G106 e X5105. Questa guida illustra la configurazione del software e gli schemi di collegamento per un'integrazione perfetta.