DAKASON 4FT Vapor Tight LED Light with Motion Sensor Instruction Manual

1. Introduzione

Thank you for choosing the DAKASON 4FT Vapor Tight LED Light with Motion Sensor. This fixture is designed for durability and efficiency in challenging environments. It features adjustable wattage, an IP65 waterproof rating, and integrated motion and daylight sensors for optimized energy consumption.

This manual provides essential information for the safe installation, operation, and maintenance of your LED light fixture. Please read it thoroughly before installation and keep it for future reference.

2. Informazioni sulla sicurezza

AVVERTIMENTO: Rischio di scossa elettrica. Scollegare l'alimentazione prima dell'installazione o della manutenzione.
L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto di tutti i codici elettrici nazionali e locali.
Garantire la fornitura voltage is compatible with the fixture's requirements (100-277V AC).
Do not handle live wires. Always use appropriate personal protective equipment.
Non modificare l'apparecchio né utilizzarlo per scopi diversi da quello previsto.
Durante il funzionamento, tenere lontani dall'apparecchio materiali infiammabili.
This fixture is rated IP65 for dust and water jet protection. Ensure all connections are properly sealed during installation to maintain this rating.

3. Contenuto della confezione

Prima di procedere con l'installazione, verificare che tutti i componenti siano presenti e integri.

1 x DAKASON 4FT Vapor Tight LED Light Fixture
2 x V-hooks
2 x staffe di montaggio
4 x tasselli in plastica
4 x Viti
Guarnizioni 4 x

Image showing all included mounting hardware: V-hooks, mounting brackets, plastic wall plugs, screws, and gaskets.

Figure 3.1: Included Mounting Kit and Components

4. Specifiche

Marca	DAKASON
Nome del modello	Luce a tenuta di vapore a LED
Numero di modello	P4-54A-50
Misurare	4FT (47.2 inches)
Cosatage	Adjustable: 40W / 50W / 60W
Luminosità	Fino a 6600 lumen (a 60 W)
Efficienza	110 lumen per watt
Voltage	100-277V AC
Temperatura del colore	5000 Kelvin (bianco freddo)
Grado di protezione IP	IP65 (Waterproof, Dust-tight)
Materiale	Polycarbonate (PC) housing and lens
Caratteristiche speciali	Dimmable, Motion Sensor, Photocell (Daylight Sensor), Wattage Regolabile
Tipo di montaggio	Ceiling Mount / Wall Mount (Surface Mount)
Certificazioni	Elencato UL
Durata	50,000 ore
Dimensioni del prodotto	47.2 cm L x 3.74 cm P x 3.38 cm A
Peso dell'articolo	4.74 libbre

5. Configurazione e installazione

Before beginning installation, ensure the power supply is turned off at the circuit breaker. This fixture is designed for surface mounting on ceilings or walls.

5.1. Montaggio dell'apparecchio

Preparare la superficie di montaggio: Choose a suitable location for the fixture. Mark the drilling points for the mounting brackets using the fixture as a guide.
Installare le staffe di montaggio: Drill pilot holes at the marked locations. Insert the plastic wall plugs (if needed for drywall/masonry) and secure the mounting brackets to the surface using the provided screws. Ensure the brackets are firmly attached.
Fissare l'apparecchio: Carefully align the fixture with the installed mounting brackets and secure it in place. The fixture can be clipped into the brackets.

Diagram showing the components of the vapor tight light fixture including stainless steel clips, mounting bracket, waterproof cable gland, reliable driver, and PC lens & housing.

Figure 5.1: Fixture Components and Mounting Points

A person installing the DAKASON LED light fixture in a garage, with the mounting brackets and screws visible.

Figura 5.2: Esample of Fixture Installation

5.2. Cablaggio elettrico

Ensure power is OFF before wiring. The fixture is designed for 100-277V AC input. Connect the supply wires to the fixture's internal wiring terminals:

Collegare il Dal vivo (nero) wire from the power supply to the fixture's Live terminal.
Collegare il Neutro (Bianco) wire from the power supply to the fixture's Neutral terminal.
Collegare il Ground (Green/Bare Copper) wire from the power supply to the fixture's Ground terminal.

Use the waterproof cable gland to ensure a sealed entry point for the wiring, maintaining the IP65 rating.

Close-up of the LED driver inside the fixture, showing input and output wiring terminals.

Figure 5.3: Internal Wiring and Driver

6. Funzionamento e impostazioni

The DAKASON LED Vapor Tight Light features adjustable wattage and intelligent sensor controls. These settings are configured using dip switches located inside the fixture.

6.1. Cosatage Regolazione

The fixture allows you to select between three wattage outputs: 40W, 50W, and 60W. This adjusts the light output (lumens) accordingly.

40W: Circa 4400 lumen
50W: Circa 5500 lumen
60W: Circa 6600 lumen

Per regolare l'acquatage, individua il wattage selection switch inside the fixture and set it to your desired output. Ensure power is disconnected before making adjustments.

Image showing a workshop setting with three different light levels corresponding to 40W, 50W, and 60W, and a close-up of the wattage interruttore di selezione.

Figura 6.1: Wattage Options and Selection

6.2. Impostazioni del sensore di movimento

The integrated motion sensor allows for automatic lighting control based on presence. Settings are configured via dip switches.

Close-up of the dip switch panel for motion sensor settings, showing options for sensitivity, hold time, daylight sensor, stand-by period, stand-by dimming level, and sensor mode.

Figure 6.2: Motion Sensor Dip Switch Panel

Refer to the diagram on the fixture's sensor module for specific dip switch positions. Key settings include:

Sensibilità di rilevamento: Adjusts how easily the sensor detects motion (e.g., 50% or 100%).
Tempo di attesa: The duration the light stays at 100% brightness after motion is detected and then ceases (e.g., 5s, 90s, 5min, 10min).
Periodo di attesa: The duration the light remains at a dimmed level after the hold time expires and before turning completely off (e.g., 0s, 10s, 15min, +∞ for always on at dim level).
Livello di attenuazione in standby: The brightness level during the stand-by period (e.g., 20% or 30%).
Modalità sensore: Allows enabling or disabling the motion sensor function entirely.

Example of Motion Sensor Logic:

Six-panel diagram illustrating the motion sensor's behavior at a train station: light off with sufficient daylight, dims to 20% with low ambient light, 100% with motion, stays on for hold time, dims to standby, then off when ambient light is high.

Figure 6.3: Motion Sensor Operation Flow

6.3. Daylight Sensor (Photocell)

The daylight sensor (photocell) automatically controls the light based on ambient light levels, saving energy during daylight hours.

Daylight Priority Technology: The sensor will turn on the light fixture when ambient light is below 50 Lux (dusk), even without motion.
When ambient light is above 50 Lux (dawn), the sensor will switch off the light fixture, even if motion is detected.
The daylight sensor function can be disabled via a dip switch if not required.

Image showing a building exterior at dusk and dawn, illustrating how the daylight sensor automatically turns the lights on when ambient light is low and off when it's high.

Figure 6.4: Daylight Sensor Auto On/Off

7. Manutenzione

The DAKASON LED Vapor Tight Light is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.

Pulizia: Scollegare l'alimentazione prima della pulizia. Pulire l'apparecchio con un panno morbido e asciutto.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate housing and lens.
Ispezione: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure the stainless-steel hasps and clips are securely fastened to maintain the vapor-tight seal.
LED: The LEDs are maintenance-free and have a lifespan of 50,000 hours. They are not user-replaceable.

8. Risoluzione Dei Problemi

If you encounter issues with your DAKASON LED Vapor Tight Light, refer to the following common problems and solutions:

Problema	Possibile causa	Soluzione
La luce non si accende.	No power supply; incorrect wiring; sensor disabled or misconfigured; ambient light too high.	Check circuit breaker and wiring connections. Verify sensor settings (Daylight Sensor, Sensor Mode). Ensure ambient light is below 50 Lux if Daylight Sensor is enabled.
Light stays on continuously or for too long.	Motion sensor Hold Time or Stand-by Period set too long or to infinite (+∞); constant motion in detection area; sensor malfunction.	Adjust Hold Time and Stand-by Period dip switches. Ensure no continuous motion is triggering the sensor. If issue persists, contact support.
Light turns on/off too frequently or is too sensitive.	Motion sensor sensitivity set too high; environmental factors (e.g., small animals, moving objects, vibrations).	Reduce the Detection Sensitivity setting on the dip switch. Consider the mounting location to minimize false triggers.
Sfarfallio di luce.	Incompatible dimmer switch (this fixture is not designed for external dimmers); power supply instability; rare individual sensitivity to LED refresh rates.	Ensure no external dimmer switches are used. Check power supply stability. While most users do not perceive flicker, some individuals may be more sensitive to the inherent refresh rate of LED lighting.
La luce non è abbastanza intensa.	Cosatage setting is too low; Stand-by Dimming Level is active.	Regola il tempotage selection switch to a higher setting (e.g., 60W). Check motion sensor settings to ensure the light is not in a dimmed stand-by state.

9. Garanzia e supporto

The DAKASON LED Vapor Tight Light is backed by a Garanzia di 5 anno, ensuring its quality and performance. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact DAKASON customer support. Provide your purchase details and model number (P4-54A-50) when contacting support to expedite assistance.

You can typically find contact information for the seller or manufacturer through your purchase platform or the DAKASON official websito.

	Omni-Ray Lighting 3Watts 3CCT Vapor Tight LED - Specifications and Installation Guide Comprehensive details on the Omni-Ray Lighting 3Watts 3CCT Vapor Tight LED fixture, including features, applications, construction, electrical and optical specifications, performance data, warranty, and a step-by-step installation manual. Model LS-VT40/50/60W-XXK.
	Supertech Lights CCT Tunable LED Vapor Tight Light - Specifiche e guida all'installazione Specifiche dettagliate, caratteristiche, applicazioni e guida all'installazione della lampada LED sintonizzabile Supertech Lights CCT Vapor Tight. Include dati sulle prestazioni, dimensioni e avvertenze di sicurezza.
	Argox P4-Series Printers Quick Installation Guide A concise guide for installing Argox P4-Series printers, covering ribbon and media loading, component identification, and compliance information.
	Arbor Scientific Electronic Spark Timer P1-8000 Instructional Guide Instructional guide for the Arbor Scientific Electronic Spark Timer (P1-8000), detailing its usage, background, and related products for physics experiments.
	Distruggidocumenti Leitz IQ Autofeed: Istruzioni per l'uso e guida alla sicurezza Istruzioni complete per i distruggidocumenti Leitz IQ Autofeed, che coprono funzionamento, norme di sicurezza, manutenzione e risoluzione dei problemi. Scopri come utilizzare il tuo distruggidocumenti Leitz in modo sicuro ed efficiente.
	Manuale utente del controller wireless P4-3 Manuale utente per il controller wireless P4-3, che descrive dettagliatamente il prodotto, i parametri, la composizione dei tasti, la connessione, gli indicatori LED, la funzione turbo, la funzione di reset e le precauzioni di sicurezza.

DAKASON P4-54A-50

DAKASON 4FT Vapor Tight LED Light with Motion Sensor