Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric 46-inch LED Utility Light. This fixture features a motion sensor, multiple operating modes, a timer, and remote control functionality, designed for use in various indoor environments such as garages, workshops, and storage areas.
Image: The Feit Electric 46-inch LED Utility Light, shown with hanging chains attached.
Informazioni sulla sicurezza
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in electric shock, fire, or other hazards.
- Prima dell'installazione o della manutenzione, assicurarsi che l'alimentazione sia scollegata.
- Questo prodotto è destinato esclusivamente all'uso in ambienti interni.
- Non tentare di modificare l'apparecchio.
- Se non si è sicuri di una qualsiasi parte dell'installazione, consultare un elettricista qualificato.
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- 1 x Feit Electric 46" LED Utility Light
- 1 x telecomando
- Mounting Hardware (chains, screws, anchors)
Image: A collection of mounting hardware including chains, screws, and anchors.
Image: The remote control, a wall mount bracket, and batteries for the utility light.
Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | SHOP/4/840/MM |
| Dimensioni (L x P x A) | 46.2" x 2.1" x 2.2" |
| Cosatage | 55W |
| Luminosità | 5000 lumen |
| Temperatura del colore | Bianco freddo 4000K |
| Voltage | 120 Volt |
| Durata | Fino a 50,000 ore |
| Caratteristiche speciali | Motion Sensor, Remote Controlled |
| Tipo di installazione | Flush Mount, Hanging |
| Uso interno/esterno | Al chiuso |
| Materiale | Plastica |
Image: Diagram illustrating the 46-inch length, 2-inch width, and 3.35-inch height of the light, along with icons for 55W, 5000 Lumens, 50,000 Hours, 4000K Color Temperature, Link up to 6 Fixtures, 5 Motion Detection Options, 7 Motion Timer Options, Intuitive IR Wireless Remote included, and 10 Adjustable Brightness Levels.
Configurazione e installazione
The Feit Electric LED Utility Light offers versatile installation options: hanging or flush mount. Ensure the power source is off before installation.
Installazione sospesa
- Attach the hanging chains to the designated points on the fixture.
- Securely fasten the other end of the chains to a sturdy ceiling structure using the provided hooks and screws.
- Adjust the chain length to achieve the desired height.
Installazione a filo
- Position the fixture against the ceiling at the desired location.
- Mark the mounting points through the fixture's mounting holes.
- Praticare dei fori pilota e, se necessario, inserire i tasselli a muro.
- Fissare l'apparecchio al soffitto utilizzando le viti in dotazione.
After mounting, plug the 5-ft. cord into a standard electrical outlet.
Image: A visual comparison showing how to perform a flush mount installation with screws and a hanging installation with chains and hooks.
Istruzioni per l'uso
The utility light can be operated manually or via the included remote control.
Funzioni del telecomando
The remote control allows for comprehensive management of the light's features:
Image: A detailed diagram of the remote control, labeling buttons for ON/OFF, increasing/decreasing light level, setting to highest brightness, resetting to default, setting lowest light level, motion timer options (30s, 1min, 3min, 5min, 10min, 15min, 30min), and motion range settings (2-5ft, 5-10ft, 10-15ft, 15-25ft, 20-25ft).
- Pulsante di accensione: Accende o spegne l'unità.
- Livello di luminosità: Use the up/down arrows to increase or decrease light intensity.
- ALTO/BASSO: Quickly set to highest or lowest brightness. Press and hold HIGH for three seconds to reset to default settings.
- Motion Timer: Select from 30 seconds, 1 minute, 3 minutes, 5 minutes, 10 minutes, 15 minutes, or 30 minutes. The light will turn off after the pre-selected time if no motion is detected.
- Gamma di movimento: Set the motion sensor detection distance to 2-5ft, 5-10ft, 10-15ft, 15-25ft, or 20-25ft.
Funzionamento del sensore di movimento
The built-in PIR motion sensor detects movement and can automatically activate the light. There are 5 convenient lighting modes:
- Sempre attivo: La luce rimane accesa ininterrottamente.
- Motion Sensor On/Off: Light turns on when motion is detected and off when no motion is detected for a set period.
- Motion Sensor with Timer: Light turns on with motion and stays on for the selected timer duration.
- Modalità di attenuazione: Light operates at a reduced brightness level.
- Modalità notturna: Specific setting for low-light conditions.
Image: A woman walking in a kitchen, illustrating the motion detection range with options from 2-5ft to 20-25ft.
Manutenzione
This LED utility light is designed for long-lasting, maintenance-free operation. To ensure optimal performance:
- Pulizia: Scollegare l'alimentazione prima della pulizia. Pulire l'apparecchio con un panno morbido, asciutto o leggermente asciutto.amp panno. Non usare detergenti abrasivi o solventi.
- Sostituzione della lampadina: I LED integrati sono progettati per durare fino a 50,000 ore e non sono sostituibili dall'utente.
- Ispezione: Periodically check the mounting hardware for tightness and ensure the power cord is free from damage.
Risoluzione dei problemi
If you experience issues with your utility light, refer to the following common solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende | No power, loose connection, remote battery dead | Check power outlet, ensure cord is securely plugged in, replace remote batteries. |
| Il sensore di movimento non funziona | Incorrect motion range setting, obstruction, ambient light too high | Adjust motion range on remote, clear obstructions, ensure sensor is not in direct bright light. |
| La luce tremola o si attenua inaspettatamente | Unstable power supply, faulty unit | Check power source. If problem persists, contact customer support. |
Garanzia
This Feit Electric LED Utility Light is covered by a Garanzia del produttore di 5 anni. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the official Feit Electric websito o contattare l'assistenza clienti.
Assistenza clienti
For 24/7 customer support and additional resources, please visit the Feit Electric help center:
Image: A graphic indicating 24/7 help and directing users to feit.com/help, accompanied by a QR code.
