Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your AZZA Cube 360 360mm All-in-One (AIO) CPU Liquid Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance of your cooling system.
Precauzioni di sicurezza
Per evitare danni al prodotto o lesioni personali, attenersi alle seguenti linee guida di sicurezza:
- Prima di procedere all'installazione o alla manutenzione, assicurarsi che il computer sia spento e scollegato dalla presa a muro.
- Handle components with care to avoid electrostatic discharge. Consider using an anti-static wrist strap.
- Do not open the liquid cooler's sealed components. Tampering with the unit may void the warranty and cause leaks.
- Tenere il prodotto lontano da liquidi e temperature estreme.
- If any part is damaged, do not attempt to install or operate the cooler. Contact customer support.
Contenuto della confezione
Verifica che tutti i componenti siano presenti nel tuo pacchetto:
- AZZA Cube 360 AIO Liquid Cooler (Radiator, Pump, Tubing, and Fans pre-attached)
- Intel Mounting Bracket Kit (LGA 115X / 1366 / 1200 / 1700 / 1851)
- AMD Mounting Bracket Kit (AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1)
- Piastra posteriore per socket Intel
- Viti di montaggio e distanziali
- Pasta termica (pre-applicata o in tubetto)
- Manuale dell'utente (questo documento)
Specifiche tecniche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | LCAZ-360P-ARGB CUBE |
| Dimensioni del radiatore | 360mm |
| Waterblock Height | 85mm |
| Socket Intel compatibili | LGA 115X / 1366 / 1200 / 1700 / 1851 |
| Socket AMD compatibili | AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 |
| Metodo di raffreddamento | Liquid and Air |
| Velocità della ventola | Fino a 2000 giri/min |
| Livello di rumore | 34 dB(A) |
| Flusso d'aria | 16.4 - 65.2 CFM |
| Materiale | Copper (cold plate), Aluminum (radiator) |
| Tipo di connettore di alimentazione | 3-Pin (Pump), ARGB (Fans/Pump) |
| Voltage | 5 Volts (ARGB) |
| Product Dimensions (Waterblock) | 2.76 x 3.35 x 3.09 pollici |
| Peso dell'articolo | 5.26 libbre |
| Supporto ARGB | SÌ |
Guida all'installazione
Prima di iniziare
- Gather necessary tools: Phillips head screwdriver, thermal paste cleaner (if reapplying).
- Ensure your PC case has adequate space for a 360mm radiator.
- Identify your CPU socket type (Intel or AMD) to select the correct mounting hardware.
Componente suview
The AZZA Cube 360 AIO Liquid Cooler consists of a radiator with three fans, a pump integrated into the waterblock, and connecting tubes. The waterblock features an 85mm tall design for efficient heat transfer.
Immagine: Oltreview of the AZZA Cube 360 AIO Liquid Cooler, showing the 360mm radiator with three RGB fans and the distinct cube-shaped waterblock.
Installazione passo dopo passo
- Prepara la scheda madre:
- For Intel sockets, install the appropriate backplate behind the motherboard.
- Install the correct standoffs onto the motherboard for your CPU socket type.
- If thermal paste is pre-applied to the cold plate, ensure it is clean and intact. If not, apply a small amount of high-quality thermal paste to the center of your CPU's integrated heat spreader (IHS).
- Installare radiatore e ventole:
The radiator comes with three 120mm fans pre-installed. These fans feature a vortex design for efficient airflow and quiet operation, with speeds up to 2000 RPM and noise levels of 34 dB (A).
Immagine: un primo piano view of one of the cooler's fans, highlighting its vortex design and ARGB lighting. The image also indicates an airflow range of 16.4 - 65.2 CFM.
- Mount the 360mm radiator to an available fan mounting location in your PC case (typically top or front). Use the provided long screws to secure the radiator and fans to the case.
- Ensure the tubing has enough slack to reach the CPU socket without excessive tension or sharp bends.
- Mount Waterblock/Pump:
The waterblock features a patented design with the pump embedded in an aluminum alloy base, minimizing vibration and enhancing safety. It also incorporates patented rectangular radiator fins and flat water channels for improved heat dissipation.
Image: An exploded diagram illustrating the internal components of the patented water pump, including the single-piece impeller and aluminum alloy pump base.
Image: The AZZA Cube 360 AIO Liquid Cooler mounted on a motherboard, showcasing its compact waterblock and RGB lighting in an operational setup.
- Attach the correct mounting brackets for your CPU socket to the waterblock.
- Carefully align the waterblock over the CPU, ensuring the thermal paste makes even contact.
- Secure the waterblock to the motherboard using the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.
- Collegare i cavi:
- Connect the pump's 3-pin power cable to a CPU_FAN or AIO_PUMP header on your motherboard. Consult your motherboard manual for the correct header.
- Connect the fan power cables (typically 4-pin PWM) to available fan headers on your motherboard or a fan controller.
- Connect the ARGB (Addressable RGB) cables from the fans and pump to a compatible 5V ARGB header on your motherboard or an ARGB controller. Ensure the voltage is correct (5V, not 12V) to prevent damage.
Operazione
Accensione iniziale
After completing the installation, double-check all connections. Power on your system. The fans and pump should start operating, and the ARGB lighting should illuminate. Monitor your CPU temperatures using system monitoring software to ensure proper cooling.
Controllo dell'illuminazione ARGB
The AZZA Cube 360 supports ARGB lighting. If connected to a compatible motherboard header, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync). If using a dedicated ARGB controller, refer to its manual for lighting adjustments.
Fan and Pump Speed
The fan and pump speeds are typically controlled via the motherboard's BIOS/UEFI settings or through motherboard-specific software. You can adjust fan curves to balance cooling performance and noise levels. The pump is designed to run at a consistent speed for optimal liquid circulation.
Manutenzione
Regular maintenance helps ensure the longevity and performance of your AIO cooler:
- Pulizia della polvere: Pulire periodicamente le alette del radiatore e le pale della ventola dalla polvere utilizzando aria compressa. Assicurarsi che le ventole non siano in funzione durante la pulizia per evitare danni.
- Ispezione visiva: Regularly inspect the tubing and connections for any signs of leaks or damage. Check the fan cables and ARGB connections for secure fitment.
- Pasta termica: While not frequently required, if you remove the waterblock from the CPU, you must clean off the old thermal paste and apply new thermal paste before reinstallation.
Risoluzione dei problemi
If you encounter issues with your AZZA Cube 360 AIO cooler, refer to the following table for common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Temperature elevate della CPU | Poor thermal paste application; Waterblock not seated correctly; Pump not running; Insufficient airflow. | Reapply thermal paste; Re-seat waterblock; Check pump power connection; Ensure fans are spinning and radiator is clear of obstructions. |
| I ventilatori non girano | Loose fan power cable; Fan header disabled in BIOS; Faulty fan. | Check fan power connections; Verify fan header settings in BIOS; Test fans on a different header or replace if faulty. |
| Pump Not Running (No Noise/Flow) | Loose pump power cable; Pump header disabled in BIOS; Faulty pump. | Check pump power connection (3-pin to CPU_FAN/AIO_PUMP); Verify header settings in BIOS; Contact support if pump is faulty. |
| L'illuminazione ARGB non funziona | Loose ARGB cable; Incorrect ARGB header (e.g., 12V instead of 5V); Software issue; Faulty ARGB component. | Check 5V ARGB connections; Ensure correct header is used; Update/reinstall RGB software; Contact support if components are faulty. |
| Rumore eccessivo | Fans running at high RPM; Air bubbles in pump; Loose fan screws. | Adjust fan curves in BIOS/software; Gently tilt case to dislodge air bubbles; Tighten fan screws. |
Garanzia e supporto
AZZA products are manufactured to high standards and undergo rigorous quality control. This product is covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please visit the official AZZA website or contact your retailer. You may find additional resources, FAQs, and contact information on the AZZA support page: www.azza.com
