OONO F-1060 AC/DC 12V SPST Latching Relay Module User Manual

1. Introduzione

The OONO F-1060 is an AC/DC 12V Single Pole Single Throw (SPST) latching relay module designed for various control applications. A key feature of this module is its power-off memory, which ensures that the output switch status remains unchanged even if the power supply is interrupted. This manual provides essential information for the safe and effective installation, operation, and maintenance of your F-1060 relay module.

2. Informazioni sulla sicurezza

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electrical shock, fire, or property damage.

• Scollegare l'alimentazione: Scollegare sempre l'alimentazione dal circuito prima di eseguire qualsiasi installazione, cablaggio o manutenzione.
• Personale qualificato: Installation and wiring should be performed by qualified personnel familiar with electrical systems and local electrical codes.
• Voltage e valori attuali: Non superare il volume specificatotage and current ratings of the relay module.
• Custodia corretta: Ensure the module is installed in a suitable enclosure to protect it from environmental factors and accidental contact.
• Cablaggio: Use appropriate wire gauges for the current load and ensure all connections are secure.

3. Prodotto finitoview

The OONO F-1060 is a compact, pre-wired latching relay module housed in a durable polycarbonate plastic enclosure. It features a Single Pole Single Throw (SPST) output switch and accepts AC/DC 12V input control signals. The module is designed for easy integration into various electrical systems, offering reliable power-off memory functionality.

Figura 3.1: Davanti view of the OONO F-1060 Latching Relay Module, showing the product label with input and contact ratings, and wiring diagram for the internal relay.

4. Specifiche

Figura 4.1: Detailed dimensional drawing of the OONO F-1060 module, including measurements in millimeters and inches, and NPT 1/2" nipple details.

5. Contenuto della confezione

Al momento dell'apertura del pacco, verificare che tutti gli articoli siano presenti e integri.

Figura 5.1: The OONO F-1060 Latching Relay Module shown with its pre-wired leads, NPT 1/2" zinc alloy conduit locknut, and two M3x50mm mounting screws.

• 1x OONO F-1060 Latching Relay Module (pre-wired)
• 1x NPT 1/2" Zinc alloy conduit locknut
• 2 viti M3x50mm

6. Configurazione e installazione

Follow these steps for proper installation of the relay module.

6.1 Montaggio

• The module features a NPT 1/2" mounting nipple, allowing flexible installation with a junction box or outlet box. Secure it using the provided zinc alloy conduit locknut.
• Two screw mounting holes are provided for fixing the module to a wall or wooden board using the supplied M3x50mm screws.

Figura 6.1: Examples demonstrating how the OONO F-1060 module can be installed within a standard electrical junction box using its NPT nipple and locknut.

6.2 Istruzioni per il cablaggio

Refer to the wiring diagrams below for connecting the input control signal and the load. Ensure all connections are tight and insulated.

Figura 6.2: Comprehensive wiring diagrams illustrating connections for DC COM+ (Sink NPN), DC COM- (Source PNP), and AC input control signals. Each diagram shows the connection of the BLU ON, GRN OFF, YLW COM, RED, and BLK wires to the power source, control inputs, and the load.

• Input Control Wires:
  • BLU ON: Connect to the positive control signal to turn the relay ON.
  • GRN OFF: Connect to the positive control signal to turn the relay OFF.
  • YLW COM: Common wire for the input control signal.
• Output Switch Wires (SPST):
  • ROSSO: One side of the SPST switch.
  • NERO: The other side of the SPST switch.
• Connessione di carico: Connect your load (e.g., light, motor) in series with the RED and BLK wires and the power source for the load.
• Tipi di segnale di ingresso: The module supports AC, DC COM+ (Sink NPN), or DC COM- (Source PNP) input control signals. Ensure your control signal matches the module's requirements.

7. Istruzioni per l'uso

The OONO F-1060 is a latching relay, meaning it maintains its state (ON or OFF) until a new control signal is received, even if power to the control circuit is removed.

• Accendere: Apply a momentary AC/DC 12V signal between the BLU ON wire and the YLW COM wire. The relay will switch to the ON state and remain ON.
• Spegnendo: Apply a momentary AC/DC 12V signal between the GRN OFF wire and the YLW COM wire. The relay will switch to the OFF state and remain OFF.
• Memoria di spegnimento: If the main power supply to the module is interrupted, the relay's last state (ON or OFF) will be preserved. When power is restored, the relay will resume its previous state without requiring a new control signal.

8. Manutenzione

The OONO F-1060 relay module is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure its longevity and performance.

• Ispezione visiva: Ispezionare periodicamente il modulo e il relativo cablaggio per verificare la presenza di eventuali segni di danni, collegamenti allentati o corrosione.
• Pulizia: Se necessario, pulire delicatamente l'esterno del modulo con un panno asciutto e morbido. Non utilizzare detergenti abrasivi o solventi.
• Condizioni ambientali: Assicurarsi che l'ambiente operativo rimanga entro gli intervalli di temperatura e umidità specificati per evitare guasti prematuri.

9. Risoluzione Dei Problemi

If you encounter issues with your OONO F-1060 relay module, refer to the following troubleshooting guide:

10. Garanzia e supporto

OONO products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the product packaging or contact your retailer. Please have your product model number (F-1060) available when contacting support.