1. Introduzione
This manual provides detailed instructions for the proper use and application of CERAKOTE C-SERIES GLACIER BLACK (C-7600P) air cure ceramic coating. This product is designed to provide a durable, high-performance finish with exceptional chemical resistance and UV stability on various substrates, including metals and polymers.
CERAKOTE C-SERIES coatings are air-cured and ready to spray, requiring no additional catalyst. The Glacier Black (C-7600) variant offers a deep black, sleek satin finish.
2. Informazioni sulla sicurezza
WARNING: This product is a chemical coating. Always follow safety precautions.
- Ventilazione: Use in a well-ventilated area or outdoors. Avoid inhaling vapors.
- Dispositivi di protezione individuale (DPI): Wear appropriate chemical-resistant gloves, eye protection (safety glasses or goggles), and a respirator suitable for organic vapors.
- Contatto con la pelle: Evitare il contatto prolungato o ripetuto con la pelle. Lavarsi accuratamente con acqua e sapone dopo l'uso.
- Contatto visivo: In caso di contatto con gli occhi, sciacquare immediatamente con abbondante acqua per almeno 15 minuti e consultare un medico.
- Ingestione: Non ingerire. In caso di ingestione, non provocare il vomito. Consultare immediatamente un medico.
- Infiammabilità: Tenere lontano da fiamme libere, scintille e superfici calde.
- Magazzinaggio: Conservare in un luogo fresco e asciutto, lontano dalla luce solare diretta e da materiali incompatibili. Tenere il contenitore ben chiuso quando non in uso.
3. Prodotto finitoview
The CERAKOTE C-SERIES GLACIER BLACK (C-7600P) is an advanced air-cured ceramic coating formulated for high-temperature applications and environments where extreme durability is required. It provides a deep black, satin finish that maintains its aesthetic and protective qualities under harsh conditions.
Caratteristiche principali:
- Air-cured, ready-to-spray formula.
- No catalyst required.
- Deep black, sleek satin finish.
- Extremely high chemical resistance.
- UV resistant.
- PFAS free formulation.
Figure 1: CERAKOTE C-7600 Glacier Black 16oz bottle. Note the 'C-Series Coating' and 'Glacier Black' labels, and the 'Important: Solids will settle! Must shake well for proper application' warning.
Figure 2: PFAS Free logo, indicating the product's environmental compliance.
4. Preparazione e installazione della superficie
Proper surface preparation is critical for optimal adhesion and performance of CERAKOTE coatings. Do not skip or rush these steps.
4.1. Attrezzatura richiesta
- HVLP or conventional spray gun with appropriate nozzle size (e.g., 0.8mm - 1.4mm).
- Air compressor with moisture separator.
- Abrasive blasting equipment (optional, but recommended for optimal adhesion on metals).
- Degreaser (e.g., acetone, MEK, or specialized Cerakote degreaser).
- Clean, lint-free cloths.
- Personal Protective Equipment (PPE) as outlined in Section 2.
4.2. Fasi di preparazione della superficie
- Smontaggio: Disassemble the item to be coated into its individual components.
- gradoasing: Thoroughly degrease all surfaces using a suitable degreaser. Ensure all oils, greases, and contaminants are removed. Repeat if necessary.
- Abrasive Blasting (for Metals): For optimal adhesion on metal substrates, abrasive blast the surface using 100-120 grit aluminum oxide at 80-100 PSI. This creates a profile for the coating to adhere to. Avoid blasting polymers unless specified by the manufacturer.
- Pulizia finale: After blasting (if applicable), re-degrease the surface to remove any blasting media residue or new contaminants. Use clean, lint-free cloths.
- Essiccazione: Ensure the surface is completely dry before application. Use compressed air to blow out any crevices.
4.3. Preparazione del prodotto
- Agitare bene: CERAKOTE C-SERIES coatings contain solids that will settle. Shake the bottle vigorously for at least 5 minutes before use to ensure a uniform mixture.
- No Catalyst: This C-Series product is air-cured and does not require a catalyst. Do not add any.
- Strain (Optional): For best results, strain the coating through a 100-190 micron filter before pouring into the spray gun cup to prevent clogs.
5. Istruzioni per l'uso (applicazione)
Apply CERAKOTE C-SERIES GLACIER BLACK in a controlled environment, maintaining consistent temperature and humidity if possible.
5.1. Spray Gun Settings
- Pressione dell'aria: Typically 20-30 PSI at the gun, depending on the gun type and desired atomization. Adjust as needed for a fine, even spray pattern.
- Fluid Control: Adjust to achieve a consistent flow without excessive material.
5.2. Tecnica di applicazione
- Hold the spray gun 4-6 inches (10-15 cm) from the surface.
- Apply thin, even coats with overlapping passes. Avoid heavy coats, which can lead to runs or uneven curing.
- Allow 5-10 minutes flash time between coats, or until the surface appears matte and no longer wet.
- Typically, 1-2 coats are sufficient to achieve full coverage and desired film thickness.
- Ensure all surfaces are evenly coated.
5.3. Curing Process
- CERAKOTE C-SERIES GLACIER BLACK is an air-cure coating. It will be dry to the touch within 24 hours at ambient temperatures (60-75°F / 15-24°C).
- Full cure and maximum hardness are achieved over a period of 5-7 days. Handle coated items carefully during this initial curing period.
- Do not expose to harsh chemicals or extreme abrasion until fully cured.
6. Manutenzione
Once fully cured, CERAKOTE C-SERIES GLACIER BLACK is highly durable and requires minimal maintenance.
- Pulizia: Clean coated surfaces with mild soap and water. Avoid abrasive cleaners or harsh solvents, especially during the initial cure period.
- Protezione: While highly resistant, avoid unnecessary impact or scratching to preserve the finish.
7. Risoluzione Dei Problemi
This section addresses common issues that may arise during application.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Scarsa adesione/decapaggio | Improper surface preparation (oils, grease, inadequate blast profile). | Ensure thorough degreasing and proper abrasive blasting (for metals). Re-clean and re-apply. |
| Uneven Finish / Orange Peel | Incorrect spray gun settings (too much or too little air pressure), improper distance, or too thick coats. | Adjust air pressure and fluid control. Maintain consistent spray distance. Apply thinner, even coats. |
| Runs / Sags | Applying coats too heavily or not allowing sufficient flash time between coats. | Apply thinner coats. Increase flash time between coats. |
| Clogging Spray Gun | Coating not shaken well, or not strained. | Shake product thoroughly before use. Strain coating before pouring into gun. Clean gun immediately after use. |
8. Specifiche
| Attributo | Dettaglio |
|---|---|
| Marca | CERAKOTE |
| Numero di modello | C-7600P |
| Colore | Glacier Black (C-7600) |
| Tipo di finitura | Raso |
| Misurare | PINT (16 Fluid Ounces) |
| Tipo di vernice | Ceramic-based |
| Raccomandazione di superficie | Metal, Polymer, More |
| Uso interno/esterno | All'aperto |
| Caratteristica speciale | UV Resistant, PFAS Free |
| È impermeabile | VERO |
| Copertura | Approximately 152.875 square feet (per 16oz pint) |
| Dry Time (to touch) | 24 ore |
| Produttore | Cerakote |
| Data prima disponibilità | 12 dicembre 2022 |
9. Garanzia e supporto
For specific warranty information regarding CERAKOTE C-SERIES GLACIER BLACK (C-7600P), please refer to the official CERAKOTE website or contact their customer support directly. Warranty terms typically cover manufacturing defects and may vary based on purchase location and application.
Assistenza clienti:
- Per assistenza tecnica, richieste di informazioni sui prodotti o supporto, visitare il sito ufficiale CERAKOTE websito.
- Consultare il produttore website for the most up-to-date contact information and detailed application guides.
