Manuale di istruzioni del supporto per doppio monitor BONTEC

1. Prodotto finitoview

The BONTEC Dual Monitor Stand is an adjustable gas spring monitor desk mount designed to enhance your workspace ergonomics and efficiency. It supports two monitors ranging from 13 to 32 inches, with each arm capable of holding between 6.6 to 19.8 lbs. Crafted from premium zinc material with a reliable U-shaped joint head structure, this stand ensures smooth and quiet adjustments.

Image: The BONTEC Dual Monitor Stand, showcasing both C-clamp e opzioni di montaggio tramite passacavo.

Caratteristiche principali:

• Costruzione di alta qualità: Features premium zinc material and a robust U-shaped joint head for smooth tilt, swivel, and rotation.
• Ampia compatibilità: Suitable for 13-32 inch screens, weighing 6.6 to 19.8 lbs per arm, with VESA patterns of 75x75mm and 100x100mm.
• Robust Gas Spring: Equipped with a 750 N·m built-in gas spring, tested for 30,000 cycles to ensure long-lasting support and stability.
• Installazione flessibile: Offers both C-clamp and grommet mounting options to suit various desk setups.
• Design ergonomico: Allows seamless adjustment between sitting and standing positions, helping to relieve neck and back fatigue.

2. Configurazione e installazione

The BONTEC Dual Monitor Stand offers two convenient installation methods: C-clamp and Grommet mounting. Both methods are designed for easy setup and provide a secure foundation for your monitors.

2.1. Opzioni di montaggio

Immagine: rappresentazione visiva del C-clamp and Grommet mounting options, detailing compatible desk thickness and hole diameter.

• C-Clamp Installazione: Ideal for desks with a thickness between 0.39" and 2.76". This method clamps the stand securely to the edge of your desk.
• Installazione passacavo: Suitable for desks with existing grommet holes or where a hole can be drilled. Recommended desk thickness is 0.39" to 2.76", and hole diameter should be between 0.39" and 2.36".

2.2. VESA Compatibility

Ensure your monitors are compatible with the VESA mounting patterns supported by this stand:

• 75x75mm
• 100x100mm

Image: The monitor stand supporting two monitors, illustrating its compatibility with screens up to 32 inches and various orientations.

2.3. Gestione dei cavi

The stand features a concealed cable management system to help organize unsightly cables, contributing to a cleaner and more spacious workstation.

Image: Detail of the monitor arm's integrated cable management, designed to keep your desk tidy.

3. Operating the Monitor Stand

The BONTEC Dual Monitor Stand offers full motion adjustability, allowing you to customize your viewing experience for optimal comfort and productivity.

3.1. Adattabilità

• Inclinazione: Adjust your monitors by ±90° to reduce glare and find the perfect viewangolo di ing.
• Girevole: Swivel your monitors by ±90° to share your screen with colleagues or adjust for collaborative work.
• Rotazione: Rotate your monitors 360° to switch between landscape and portrait orientations effortlessly. Both the upper and lower arms also support 360° rotation.

Immagine: Un trasparente view of the monitor arm's gas spring, highlighting its robust design for stable support.

3.2. Regolazione della tensione della molla a gas

The gas spring tension can be adjusted to accommodate different monitor weights, ensuring your monitors stay exactly where you position them. Use the provided Allen key to adjust the tension bolt located on the arm.

• To Decrease Tension: Turn the inside screw clockwise ("-"). This is typically needed if your monitor is too light and keeps rising up.
• To Increase Tension: Turn the inside screw counter-clockwise ("+"). This is typically needed if your monitor is too heavy and keeps falling down.

Adjust the tension gradually, up to 14 turns for maximum 750Nm, until the monitor holds its position freely.

Image: The premium zinc plating U-shaped tilt joint, ensuring quiet and smooth adjustments for monitors up to 19.8 lbs.

4. Manutenzione

To ensure the longevity and optimal performance of your BONTEC Dual Monitor Stand, follow these simple maintenance guidelines:

• Pulizia regolare: Pulire il supporto con un panno morbido, damp panno per rimuovere polvere e detriti. Evitare l'uso di prodotti chimici aggressivi o detergenti abrasivi.
• Controllare le connessioni: Controllare periodicamente tutte le viti e i collegamenti per accertarsi che siano ben saldi. Serrare se necessario.
• Gestione dei cavi: Utilize the integrated cable management system to keep cables tidy and prevent strain on connections.

Image: The monitor stand in use, demonstrating how it helps free up valuable desk space for a more organized and productive environment.

5. Risoluzione Dei Problemi

If you encounter any issues with your BONTEC Dual Monitor Stand, refer to the common problems and solutions below:

• Monitor Tilting Down or Falling: This indicates that the gas spring tension is too low for the weight of your monitor. Increase the tension by turning the adjustment bolt counter-clockwise ("+").
• Monitor Rising Up: This indicates that the gas spring tension is too high for the weight of your monitor. Decrease the tension by turning the adjustment bolt clockwise ("-").
• Difficoltà di installazione: Ensure you are using the correct mounting method (C-clamp or Grommet) for your desk and that desk thickness and hole diameter (for grommet) are within the specified ranges.

6. Specifiche

7. Garanzia e supporto

For warranty information, technical support, or any inquiries regarding your BONTEC Dual Monitor Stand, please refer to the warranty card included in your product packaging or visit the official BONTEC website. You may also contact BONTEC customer service directly for assistance.