TC Electronic JIMS 800 PREAMP Pedale per chitarra

1. Introduzione

The TC Electronic JIMS 800 PREAMP is a twin-channel guitar preamp pedal designed to deliver classic, guitar-driven rock tones. Utilizing advanced TC Ampworx component-based modeling technology, this compact pedal encapsulates the sound and feel of an iconic 80s guitar amplifier. It features independent channel controls, pre/post boost functionality, and dedicated outputs for DI and headphones, offering versatile usage for practice, recording, and live performance.

2. Informazioni sulla sicurezza

• Always use a regulated 9V DC power supply with a center-negative polarity and a minimum current rating of 300mA. Incorrect power supplies can damage the unit and void the warranty.
• Non esporre il pedale ad acqua, umidità o temperature estreme.
• Avoid dropping or subjecting the pedal to severe impacts.
• Do not attempt to open the enclosure or modify the internal circuitry. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the pedal during operation.

3. Contenuto della confezione

Your TC Electronic JIMS 800 PREAMP package should contain the following:

• JIMS 800 PREAMP Pedale per chitarra
• Guida rapida (se inclusa)

Note: A power supply is not included and must be purchased separately.

4. Caratteristiche del prodotto

• Twin-Channel Preamp: Offers two distinct channels for versatile tonal options.
• Independent Channel Controls: Each channel features dedicated controls for precise tone shaping.
• Pre/Post Boost: Provides an added gain boost that can be applied before or after the preamp sezione.
• Dedicated Outputs: Includes outputs for DI (Direct Injection) and headphones for flexible connectivity.
• Treble Bleed Circuit: Smooths out sharp tones for a more pleasant listening experience.
• Authentic Cab Simulation: Features precise convolution-based IR technology for a classic G12-65 4x12 cab speaker sound.
• Versatile Tonestack: Combines the iconic tone control layout of the original amp with modern versatility.
• Added Gain Power: A subtle additional gain boost on the second channel pushes your sound without compromising the original amp's feel.

5. Controlli e collegamenti

Figura 1: Controlli del pannello frontale

• Manopola GAIN: Adjusts the input gain and distortion level of the selected channel.
• Manopola BOOST: Controls the level of the independent boost function.
• Manopola LIVELLO: Imposta il volume di uscita complessivo del pedale.
• Manopola BASSO: Regola la risposta alle basse frequenze del tono.
• Manopola MID: Regola la risposta in frequenza media del tono.
• Manopola TREBLE: Regola la risposta alle alte frequenze del tono.
• Pedale BOOST: Activates or deactivates the boost function. An LED indicates its status.
• CHANNEL Footswitch: Switches between the two preamp channels. An LED indicates the active channel.
• TELEFONO Jack: 3.5mm stereo output for headphones, featuring cab simulation.

Figura 2: Collegamenti del pannello posteriore

• Nel Jack: Ingresso mono da 1/4" per la tua chitarra.
• FUORI Jack: Uscita mono da 1/4" al tuo amplifier o altri pedali.
• DI Jack: XLR output for direct connection to a mixing desk or audio interface, with cab simulation.
• Manopola PRESENZA: Adjusts the high-frequency contour, adding clarity or bite.
• PRE/POST Switch: Determines whether the boost is applied before (PRE) or after (POST) the preamp sezione.
• Ingresso 9 V CC: Power input for a 9V DC, center-negative power supply (300mA minimum).
• Porta USB: USB 2.0 Type B port for firmware updates and potential future functionalities.

6. Impostazione

1. Collegamento elettrico: Connect a 9V DC, center-negative power supply (minimum 300mA) to the 9V DC input jack on the rear panel.
2. Collegamento chitarra: Connect your guitar to the 'IN' jack on the rear panel using a standard 1/4" instrument cable.
3. Connessione di uscita:
   • Per il collegamento a una chitarra amplifier, connect the 'OUT' jack to your amp's input.
   • For direct recording or live sound, connect the 'DI' XLR output to a mixing console or audio interface. This output includes cab simulation.
   • For silent practice, connect headphones to the 'PHONES' 3.5mm stereo jack. This output also includes cab simulation.
4. Impostazioni iniziali: Before powering on, set all knobs (GAIN, BOOST, LEVEL, BASS, MID, TREBLE, PRESENCE) to their 12 o'clock (noon) position. Ensure the PRE/POST switch is set to your desired boost placement.

7. Istruzioni per l'uso

Commutazione a 7.1 canali

Premere il tasto CANALE footswitch to toggle between the two distinct preamp channels. The corresponding LED will illuminate to indicate the active channel.

7.2 Gain and Level Adjustment

• Utilizzare il GUADAGNO knob to control the amount of overdrive and distortion for the selected channel. Higher settings will yield more saturated tones.
• Regolare il LIVELLO knob to set the overall output volume of the pedal. Ensure the output level is appropriate for your amplifier o dispositivo di registrazione.

7.3 Tone Shaping (EQ)

The JIMS 800 PREAMP features a versatile 3-band EQ:

• BASSO: Controls the low-end frequencies, adding warmth or tightness.
• CENTRO: Adjusts the mid-range frequencies, affecting the presence and punch of your tone.
• ALTI: Controls the high-end frequencies, adding brightness or smoothness.
• PRESENZA: (Rear Panel) Fine-tunes the very high frequencies, adding sparkle or cutting harshness.

7.4 Funzione boost

• Utilizzare il AUMENTO knob to set the desired amount of boost.
• Premere il tasto AUMENTO footswitch to engage or disengage the boost.
• IL PRE/POST switch on the rear panel determines where the boost is applied in the signal chain. 'PRE' applies the boost before the preamp, incrementoasing saturation. 'POST' applies the boost after the preamp, primarily increasinvolume g.

7.5 Cab Simulation

The DI and PHONES outputs feature an authentic G12-65 4x12 cab simulation, providing a studio-quality speaker cabinet sound directly from the pedal. This is ideal for recording or connecting directly to a PA system without needing a physical amplifier or cabinet.

8. Manutenzione

• Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno del pedale. Non utilizzare detergenti abrasivi o solventi.
• Magazzinaggio: Quando non viene utilizzato per lunghi periodi, conservare il pedale in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Aggiornamenti del firmware: Periodically check the TC Electronic website for any available firmware updates for your JIMS 800 PREAMP via the USB port.

9. Risoluzione Dei Problemi

• Nessun suono:
  • Assicurarsi che l'alimentatore sia collegato correttamente e funzioni.
  • Check all instrument cables for proper connection and integrity.
  • Verificare che la manopola LEVEL non sia impostata al minimo.
  • If using DI or headphones, ensure the receiving device (mixer, interface, headphones) is properly connected and its volume is up.
• Poor Tone/Unwanted Noise:
  • Check your guitar's pickups and wiring.
  • Experiment with the GAIN and EQ (BASS, MID, TREBLE, PRESENCE) settings.
  • Ensure you are using a clean, regulated power supply. Unregulated or noisy power supplies can introduce hum.
  • Eseguire delle prove con cavi diversi per escludere collegamenti difettosi.
• Boost Function Not Working:
  • Ensure the BOOST knob is turned up from minimum.
  • Check the BOOST footswitch LED to confirm it's engaged.

10. Specifiche

11. Garanzia e supporto

TC Electronic products are designed for reliability and performance. For information regarding warranty coverage, technical support, and service, please visit the official TC Electronic webo contattare direttamente l'assistenza clienti. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Official TC Electronic Websito: www.telectronic.com