Introduzione
The Smeg DN83SE is an 8 kg capacity, A+++ energy-rated freestanding front-load heat pump dryer. This appliance is designed for efficient and gentle drying of various fabric types, utilizing advanced heat pump technology to minimize energy consumption and protect garments. Please read this manual carefully before using your dryer to ensure safe and optimal operation.
Image: The Smeg DN83SE dryer, white, with its front-loading door open, revealing the empty stainless steel drum and control panel.
Impostare
Disimballaggio
Carefully remove all packaging materials. Inspect the dryer for any transport damage. Report any damage immediately to your retailer.
Posizionamento
Place the dryer on a firm, level surface. Ensure adequate ventilation around the appliance. The dryer features reversible doors, allowing for flexible installation to suit your laundry room layout.
Image: A side-front view of the white Smeg DN83SE dryer with its door closed, highlighting its compact design.
Connessione elettrica
Connect the dryer to a properly grounded electrical outlet (230-240 V AC, 50 Hz). Ensure the power cord is not trapped or damaged.
Drenaggio dell'acqua
This heat pump dryer collects condensed water in a drawer. Ensure the drawer is correctly inserted. For continuous drainage, connect the provided drain hose to a suitable drain point.
Istruzioni per l'uso
Pannello di controllo
The dryer features a control panel with a combination of a rotary knob and touch controls, along with an integrated LED display for easy program selection and monitoring.
Immagine: Un dettaglio view of the Smeg DN83SE control panel, showing the program selection knob, touch buttons, and LED display.
Caricamento del bucato
Open the door and load laundry into the 110 L stainless steel drum. Do not overload the dryer beyond its 8 kg capacity to ensure optimal drying performance.
Image: The Smeg DN83SE dryer with its door open, showing various colored clothes placed inside the drum, ready for drying.
Selezione di un programma
Turn the rotary knob to select a drying program. Available programs include: Shirts, Cotton, Duvet, Eco, Anti-allergy Hygiene, Jeans, Mix, Sport Outdoor, Quick, Refresh, Silent, Steam, Synthetics, Wool. The display will show the estimated cycle time.
Regolazione delle impostazioni
Use the touch controls to adjust additional settings such as the anti-crease function, delayed start (up to 24 hours), or child lock.
Inizio del ciclo
Press the Start/Pause button to begin the drying cycle. The internal drum light will illuminate during operation.
Immagine: un primo piano view of clothes tumbling inside the illuminated drum of the Smeg DN83SE dryer during a cycle.
Fine del ciclo
L'asciugatrice segnalerà la fine del ciclo. Rimuovere prontamente il bucato per ridurre al minimo la formazione di crepe.asing.
Manutenzione
Pulizia del filtro anti-pelucchi
After each cycle, clean the lint filter located inside the door opening. Remove accumulated lint to maintain drying efficiency and prevent fire hazards.
Image: The interior of the Smeg DN83SE dryer drum, brightly lit, showing the textured surface and the lint filter area.
Emptying the Water Condenser Drawer
Empty the water condenser drawer after each cycle. If connected to a drain, this step is not necessary.
Image: A close-up of the Smeg DN83SE dryer's water condenser drawer, partially pulled out, showing its design.
Pulizia del condensatore
Periodically clean the main condenser unit, typically located at the bottom of the appliance. Refer to the full manual for detailed instructions on accessing and cleaning the condenser.
Pulizia esterna
Pulire le superfici esterne con un panno morbido, damp stoffa. Evitare detergenti abrasivi.
Risoluzione dei problemi
- L'asciugatrice non si avvia: Check if the power cord is properly plugged in and the door is fully closed. Ensure the child lock is not activated.
- Il bucato non si asciuga correttamente: Clean the lint filter and condenser. Do not overload the dryer. Select an appropriate drying program for the fabric type.
- Rumore insolito: Controllare che non vi siano corpi estranei nel cestello. Assicurarsi che l'asciugatrice sia in piano.
- Codici di errore: If an error code appears on the display, consult the full user manual for specific solutions or contact customer support.
Specifiche
| Caratteristica | Valore |
|---|---|
| Posizionamento | Libera installazione |
| Tipo di caricamento | Carico anteriore |
| Sistema di essiccazione | Pompa di calore |
| Colore del prodotto | Bianco |
| Porte reversibili | SÌ |
| Tipo di controllo | Knob, touch |
| Display integrato | Sì (LED) |
| Cerniera della porta | Destra (reversibile) |
| Stile della porta | Porta in vetro |
| Volume del tamburo | 110 L |
| Materiale del tamburo | Acciaio inossidabile |
| Lunghezza del cavo | 1.5 milione |
| Angolo di apertura della porta | 160° |
| Capacità del tamburo | 8 Kg |
| Classe di efficienza di asciugatura | A |
| Emissione di rumore | 63 dB |
| Number of Drying Programs | 15 |
| Funzione antipiega | SÌ |
| Refrigerant Medium | R290 |
| Avvio ritardato | Yes (up to 24 H) |
| Luce del tamburo interna | SÌ |
| Blocco bambini | SÌ |
| Classe di efficienza energetica | A+++ (on a scale of A+++ to D) |
| Consumo energetico | 1.44 kWh |
| Consumo energetico annuale | 177 kWh |
| Fonte di calore | Elettrico |
| Carico connesso | 800 L |
| Ingresso CA Voltage | 230-240 V |
| Frequenza di ingresso CA | Frequenza 50 Hz |
| Dimensioni (LxPxA) | Dimensioni: 59.8 x 60.7 x 84.6 cm |
| Peso | 46 kg |
| Numero di modello | DN83SE |
Image: The energy efficiency label for the Smeg DN83SE dryer, indicating an A+++ rating.
Garanzia e supporto
Informazioni sulla garanzia
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your appliance for specific terms and conditions, including coverage period and registration details.
Assistenza clienti
For technical assistance, spare parts, or service requests, please contact Smeg customer support. Contact details can be found on the Smeg official website or in the documentation provided with your dryer. When contacting support, please have your model number (DN83SE) and serial number ready.