JADENS Thermal Label Paper User Manual

1. Introduzione

This manual provides essential information for the proper use and care of your JADENS 4x6 inch Thermal Label Paper. Designed for direct thermal printers, these labels offer reliable performance for various applications, including shipping, warehousing, and general labeling needs. Please read this manual thoroughly to ensure optimal results and longevity of your labels.

Two rolls of JADENS 4x6 inch thermal label paper, white with blue and green core accents.

Image: JADENS 4x6 inch Thermal Label Paper Rolls.

2. Specifiche del prodotto

Attributo	Dettaglio
Marca	GIADENE
Numero di modello	D261LAB01
Dimensioni del foglio	4 x 6 pollici (101.6 x 152.4 mm)
Colore	Bianco
Finitura della carta	Liscio
Peso dell'articolo	Approximately 13.4 ounces (0.84 lbs) per 2 rolls
Dimensioni del prodotto	4.53 x 2.17 x 0.1 inches (per roll)
Compatibilità	Direct thermal printers including Nelko, Rollo, IDRPT, Zebra, Brother, MUNBYN, and JADENS C10/D261 models.
Caratteristiche	Waterproof, Oil-proof, Easy Peeling with Perforated Line, Fade Resistant, Scratch Resistant, BPA/BPS Free

Diagram showing a 4x6 inch thermal label with dimensions indicated.

Image: Product size illustration for JADENS 4x6 inch thermal labels.

3. Configurazione e compatibilità

JADENS thermal label paper is designed for ease of use with a wide range of direct thermal printers. Follow your printer's specific instructions for loading label rolls.

3.1 Stampanti compatibili

These labels are compatible with most direct thermal label printers, including but not limited to:

JADENS C10 and D261 series printers
Nelko printers
Rollo printers
IDRPT printers
Zebra printers
Brother printers
MUNBYN printers
Other direct thermal printers supporting 4x6 inch labels

3.2 Loading Instructions (General)

While specific loading procedures vary by printer model, the general steps involve:

Open the printer's label compartment or cover.
Locate the label roll holder or spindle.
Place the JADENS label roll onto the holder, ensuring the labels feed out from the bottom or front, depending on your printer's design. The printable side (smoother, brighter white) should face the print head.
Feed the leading edge of the label paper through the printer's guides until it is correctly positioned for printing.
Chiudere il coperchio della stampante.
Perform a test print or calibration if required by your printer model to ensure proper alignment.

A JADENS thermal printer printing labels onto boxes, demonstrating compatibility.

Image: JADENS labels being used with a compatible printer.

4. Istruzioni per l'uso

Once the labels are loaded and your printer is ready, you can begin printing. JADENS labels are designed for clear, crisp prints and easy application.

4.1 Stampa

Ensure your printer drivers are installed and configured correctly for 4x6 inch labels.
Create your desired label content using appropriate software (e.g., shipping software, label design software).
Select your direct thermal printer and the correct label size (4x6 inches) in your software's print settings.
Initiate the print job. The thermal printer will apply heat to the labels, creating the image or text without ink or toner.

4.2 Peeling and Application

JADENS labels feature a perforated line between each label for easy separation and a strong adhesive for secure attachment.

After printing, gently tear along the perforated line to separate the label from the roll.
Peel the label from its backing paper. The backing is designed for easy removal.
Apply the label to a clean, dry, and smooth surface. Press firmly from the center outwards to ensure full adhesion and remove any air bubbles.

Images demonstrating easy peeling of the label from its backing and strong adhesive application to a box.

Image: Demonstrating the strong adhesive and easy peeling of JADENS labels.

5. Manutenzione e conservazione

Proper storage and handling will ensure the longevity and print quality of your JADENS thermal labels.

Ambiente di archiviazione: Store labels in a cool, dry place away from direct sunlight, high humidity, and extreme temperatures. Ideal storage conditions are typically between 20-25°C (68-77°F) and 40-60% relative humidity.
Avoid Heat and Light: Prolonged exposure to heat, direct sunlight, or strong fluorescent light can cause the labels to darken or fade prematurely, even before printing.
Esposizione chimica: Avoid contact with chemicals, oils, and plasticizers (found in some plastic wraps or folders) as these can degrade the thermal coating.
Gestione: Handle labels by the edges to avoid transferring oils from your skin, which can affect print quality or label longevity.
Waterproof and Oil-proof: Once printed and applied, JADENS labels are designed to be waterproof and oil-proof, providing durability in various conditions.
Fade and Scratch Resistant: The labels are engineered to resist fading and scratching, ensuring your printed information remains legible over time.

Close-up of a thermal label highlighting its waterproof, oil-proof, and easy-to-sign properties, indicating durability.

Image: Features of JADENS labels: waterproof, oil-proof, and fade resistant.

6. Risoluzione Dei Problemi

If you encounter issues while using your JADENS thermal label paper, consider the following common solutions:

Problema	Possibile causa	Soluzione
Faint or No Print	Label loaded incorrectly (non-printable side facing print head). Print head dirty or worn. Printer settings (darkness, speed) incorrect.	Reload the label roll, ensuring the printable side faces the print head. Clean the print head according to your printer's manual. Adjust printer darkness settings to a higher level.
Le etichette non vengono alimentate correttamente	Labels not aligned with guides. Dust or debris in the paper path. Printer calibration issue.	Ensure labels are snugly fitted within the printer guides. Clean the paper path and rollers. Run the printer's calibration function.
Labels Peeling Off After Application	Surface was dirty, oily, or textured. Insufficient pressure applied during application. Extreme environmental conditions (e.g., very cold, wet).	Assicurarsi che la superficie di applicazione sia pulita, asciutta e liscia. Apply firm, even pressure across the entire label when attaching. Allow labels to adhere in moderate conditions before exposing to extremes.
Labels Fading Over Time	Exposure to direct sunlight or excessive heat. Contact with certain chemicals or plasticizers.	Store unused labels in a cool, dark place. Avoid applying labels to surfaces that will be exposed to prolonged direct sunlight or extreme heat. Ensure labels do not come into contact with incompatible chemicals.

7. Garanzia e supporto

For specific warranty information regarding JADENS products, please refer to the packaging or contact JADENS customer support directly. As this product is a consumable item, warranty terms typically cover manufacturing defects.

7.1 Assistenza clienti

If you have any questions or require assistance with your JADENS thermal label paper, please visit the official JADENS store or contact their customer service team. You can often find support contact information on the product packaging or the JADENS official websito.

JADENS Store Link: Visit the JADENS Store on Amazon

	Come stampare etichette di diverse dimensioni e forme con la stampante Jadens Una guida passo passo su come stampare etichette di dimensioni e forme personalizzate utilizzando l'app Jadens Printer e la stampante termica Bluetooth per etichette. Descrive come scaricare l'app, collegare la stampante e selezionare files, ritaglio, rotazione e regolazione delle impostazioni di stampa per vari tipi di etichette.
	App per la stampa di etichette JADENS: guida passo passo alla stampa di etichette Una guida completa all'utilizzo dell'app JADENS Shipping Printer per una stampa di etichette senza interruzioni. Scopri come scaricare l'app, selezionare e ritagliare le etichette, connetterti tramite Bluetooth e stampare etichette di spedizione da diverse fonti.
	App Jadens Printer: guida passo passo alla stampa di etichette Scopri come stampare le etichette di spedizione utilizzando l'app Jadens Printer su iOS. Questa guida illustra due metodi: apertura dalla stampante di spedizione files e apertura direttamente dall'etichetta files, con passaggi dettagliati per la configurazione dell'app, file selezione e stampa.
	Manuale utente e guida all'installazione della stampante termica per etichette JADENS JD268BT Guida completa per la configurazione e l'utilizzo della stampante termica per etichette Bluetooth JADENS JD268BT, inclusa l'installazione per Windows e Mac, le impostazioni della stampante e la risoluzione dei problemi.
	App Jadens Printer: guida alla stampa di etichette su iOS Una guida completa su come utilizzare l'app Jadens Printer sui dispositivi iOS per stampare etichette, che copre la stampa diretta dall'app e la stampa di PDF salvati files. Include istruzioni per l'installazione, la connessione e l'uso.
	Manuale dell'utente della stampante termica per etichette JADENS JD-468BT Manuale utente completo per la stampante termica per etichette JADENS JD-468BT, che copre l'installazione, la configurazione, le preferenze di stampa e la manutenzione per Windows e macOS.

JADENS D261LAB01