1. Prodotto finitoview
The 6-inch Canless Wafer Downlight from Juno features an innovative, slim design that allows for quick and easy installation into as little as 3 inches of plenum space. This makes it suitable for ceiling spaces where traditional recessed housings may not fit. Wafers install directly into drywall, eliminating the need for separate recessed housings. Once installed, this versatile downlight offers an all-in-one design with switchable white color temperature and adjustable lumen output technology, providing the equivalent of 15 static products in one unit.
2. Caratteristiche principali
- Design senza lattina: No housing required, installs directly from below the ceiling.
- Risparmio energetico: Long-life LEDs with a high-efficiency driver for superior illumination and extended service life.
- Dimmerabile: Smooth dimming capability down to 10 percent.
- Ratings & Listings: Certified for wet locations, CSA certified, and IC Rated for direct contact with insulation.
- Installazione semplice: Designed for quick retrofit, remodel, or new construction without the need for housing.
Immagine: Oltreview of key features including easy installation and switchable technology.
3. Configurazione e installazione
The Juno Canless LED Wafer Downlight is designed for straightforward installation. Please ensure power is turned off at the circuit breaker before beginning any electrical work.
3.1. componenti
The product includes the LED wafer downlight and a remote driver box. The fixture and remote driver box are IC rated for direct contact with insulation.
Image: The main components of the downlight system, showing the LED wafer and its remote driver box.
3.2. Fasi di installazione
- Assicurarsi che l'alimentazione sia scollegata dall'interruttore principale.
- Cut a hole in the ceiling according to the specified diameter for the 6-inch model. Refer to the product dimensions for precise measurements.
- Connect the remote driver box to the building's electrical wiring. Follow local electrical codes and guidelines.
- Connect the LED wafer downlight to the remote driver box.
- Insert the remote driver box into the ceiling opening.
- Push the LED wafer downlight into the ceiling opening. The spring clips will secure the fixture in place.
- Ripristinare l'alimentazione e testare la luce.
Image: Detailed dimensions of the 6-inch downlight, showing its slim profile per una facile installazione.
4. Istruzioni per l'uso
This downlight offers adjustable settings to customize your lighting experience.
4.1. Regolazione della temperatura del colore
The remote driver box features a switch to select from five color temperature options:
- 2700K bianco morbido
- Bianco caldo 3000K
- Bianco neutro 3500K
- Bianco freddo 4000K
- Luce diurna 5000K
4.2. Lumen Output Adjustment
The remote driver box also includes a switch for three adjustable lumen output settings:
- Basso
- Medio
- Alto
Image: Close-up of the remote driver box, highlighting the switches for adjusting color temperature and lumen output.
4.3. Oscuramento
The downlight is dimmable to 10 percent with compatible dimmers. Ensure your dimmer switch is suitable for LED lighting to achieve optimal performance.
5. Manutenzione
The Juno Canless LED Wafer Downlight requires minimal maintenance. To clean the fixture, ensure power is off and gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or electrical components.
6. Risoluzione Dei Problemi
If you experience issues with your downlight, consider the following common solutions:
- Nessuna luce: Check the circuit breaker to ensure power is on. Verify all electrical connections are secure.
- Luce tremolante: Ensure the dimmer switch is compatible with LED lighting. Check for loose connections.
- Incorrect Color/Brightness: Verify the switches on the remote driver box are set to your desired color temperature and lumen output.
Per passaggi di risoluzione dei problemi più dettagliati, fare riferimento al sito ufficiale Guida alla risoluzione dei problemi (PDF).
7. Specifiche
| Attributo | Valore |
|---|---|
| Marca | Giunone |
| Nome del modello | Senza scatola |
| Numero di parte | WF6 ALO20 SWW5 90CRI MVOLT MW M6 |
| Misurare | 6 pollici |
| Colore | Bianco opaco |
| Materiale | Alluminio |
| Stile | Taglio piatto |
| Modulo lampada | Da incasso |
| Tipologia di camera | Bathroom, Bedroom, Conference Room, Game Room, Living Room |
| Dimensioni del prodotto | 6.69 cm L x 6.69 cm P x 1.25 cm A |
| Uso interno/esterno | Interno, Esterno |
| Fonte di alimentazione | Cablato |
| Tipo di installazione | Flush Mount |
| Caratteristica speciale | Adjustable Color Temperature, Dimmable, Energy Efficient, Low Voltage, Waterproof |
| Tipo di sorgente luminosa | GUIDATO |
| Voltage | 120 Volt |
| Colore chiaro | Bianco regolabile |
| Cosatage | 16 watt |
| Livello di resistenza all'acqua | Impermeabile |
| Produttore | Acuity Brands Illuminazione |
| Codice UPC | 197589217360 |
8. Garanzia e supporto
This Juno product comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact the manufacturer directly.
For additional support and to explore other Juno products, visit the official Juno Store on Amazon.
