BRINKS 30mm Solid Brass 4-Dial Resettable Combination Padlock

Introduzione

This manual provides essential information for the proper use and maintenance of your BRINKS 30mm Solid Brass 4-Dial Resettable Combination Padlock. Please read these instructions carefully before using the product to ensure optimal security and longevity.

Image: Two BRINKS 30mm Solid Brass 4-Dial Resettable Combination Padlocks, showing the brass body and chrome-plated shackle with four numerical dials set to '0000'.

Caratteristiche del prodotto

• 30mm Solid Brass Body: Provides durability and corrosion resistance, suitable for indoor and outdoor use.
• Chrome Plated Hardened Steel Shackle: Offers enhanced cut resistance, with a cut strength up to 1200 lbs.
• 4-Dial Resettable Combination: Allows for a personalized and easily changeable code.
• Resistente alle intemperie: Progettato per resistere a varie condizioni ambientali.
• Applicazione versatile: Ideal for securing lockers, toolboxes, small storage containers, and backpacks.

Image: A diagram illustrating the key features of the BRINKS padlock, including its 30mm body, 1,200lb cut-resistant hardened steel shackle, weather resistance, and 4-dial resettable combination.

Impostazione della combinazione

Your padlock is factory preset to Numero di parte 0-0-0-0Per impostare la tua combinazione personale, segui questi passaggi:

1. Open the padlock by aligning the factory preset code (0-0-0-0) with the indicator line and pulling up the shackle.
2. With the shackle in the open position, rotate it 90 degrees counter-clockwise until it aligns with the notch on the lock body.
3. Press the shackle down firmly into the lock body. While holding it down, set your desired 4-digit combination by rotating the dials. Ensure the numbers are clearly aligned with the indicator line.
4. Once your new combination is set, pull the shackle up to release it from the pressed-down position.
5. Ruotare la maniglia di 90 gradi in senso orario fino a riportarla nella posizione aperta originale.
6. Close the shackle by pushing it down. Scramble the dials to lock the padlock.

Important: Remember your new combination. There is no master key or override for this lock. If you forget your combination, the lock cannot be opened without knowing the code.

Immagine: un primo piano view of the BRINKS padlock's four numerical dials, showing the alignment line for setting the combination.

Utilizzo del lucchetto

Per aprire:

1. Align your personal 4-digit combination with the indicator line on the front of the padlock.
2. Tirare la maniglia verso l'alto per liberarla dal corpo della serratura.

Per chiudere e proteggere:

1. Insert the shackle back into the lock body.
2. Scramble the dials to a random set of numbers. This will secure the padlock.

Ensure the shackle is fully seated and the dials are scrambled after closing to prevent accidental opening.

Image: A BRINKS padlock securing the latch of a metal toolbox, demonstrating a common application.

Image: A BRINKS padlock attached to the handle of a gray locker, illustrating its use for personal storage.

Manutenzione

To ensure the smooth operation and longevity of your BRINKS padlock, consider the following maintenance tips:

• Pulizia: Pulisci il corpo e l'arco del lucchetto con un panno morbido e asciutto per rimuovere sporco e incrostazioni. Evita detergenti abrasivi.
• Lubrificazione: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the shackle mechanism and dials to maintain smooth movement, especially if used in dusty or outdoor environments.
• Ispezione: Regularly inspect the padlock for any signs of wear or damage. If the shackle or dials become stiff, apply lubricant.

Risoluzione dei problemi

Il lucchetto non si apre con la combinazione corretta:

• Ensure all four dials are perfectly aligned with the indicator line. Sometimes a dial might be slightly off.
• Verify that you are using the correct combination. If you recently reset it, try the new code.
• Apply a lubricant to the shackle and dials, then try again.

Difficoltà nell'impostare una nuova combinazione:

• Ensure the shackle is rotated exactly 90 degrees counter-clockwise and pressed down firmly into the lock body before attempting to set the new code.
• Make sure the dials are aligned with the indicator line when setting the new combination.

La maniglia è rigida o difficile da muovere:

• Apply a suitable lubricant (e.g., graphite or silicone spray) to the shackle entry points and around the base of the shackle.
• Work the shackle open and closed several times after lubrication to distribute the product.

Specifiche

Garanzia e supporto

For warranty information or technical support regarding your BRINKS padlock, please refer to the official BRINKS website or contact their customer service directly. Contact details are typically available on the product packaging or the manufacturer's official websito.

You can visit the official BRINKS store for more information: BRINKS Store on Amazon