Prodotto finitoview
This onerbl 12V AC DC Adapter is designed to provide reliable power for your compatible Fadakwalt 8212 and 8212A cordless drills. It features a robust design with built-in safety protections to ensure efficient and secure charging.
Image: The onerbl 12V AC DC Adapter, showing its compact design and DC barrel connector.
Caratteristiche principali
- Ingresso: AC 100-240V 50/60Hz (Worldwide AC Input)
- Produzione: 12 V CC, 3 Amps
- Energia: 36.5 Watt
- Sicurezza: oltre il volumetage Protezione, Protezione da surriscaldamento, Protezione da cortocircuito, Protezione da sovracorrente
- Compatibilità: Specifically designed for FADAKWALT 8212 and 8212A 3/8'' Cordless Drills.
Istruzioni di installazione
1. Disimballaggio e ispezione iniziale
Carefully remove the AC DC adapter from its packaging. Inspect the adapter and its cable for any signs of damage. If any damage is observed, do not use the product and contact customer support.
2. Collegamento dell'adattatore
- Ensure your Fadakwalt cordless drill is powered off.
- Locate the charging port on your Fadakwalt 8212 or 8212A cordless drill.
- Insert the DC barrel connector of the onerbl adapter firmly into the drill's charging port.
- Plug the AC plug of the adapter into a standard AC 100-240V wall outlet.
Immagine: Primo piano view of the adapter showing input and output specifications, and the DC barrel connector.
Image: Various colored Fadakwalt cordless drills, illustrating the compatible devices for this adapter.
Istruzioni per l'uso
Caricare il tuo dispositivo
- Once connected as described in the setup section, the adapter will begin to supply power to your Fadakwalt drill.
- Monitor your drill's battery indicator (if available) to determine charging status.
- Disconnect the adapter from the drill and the wall outlet once charging is complete or when the drill is ready for use.
Image: The onerbl AC DC adapter plugged into a power strip, demonstrating typical usage.
Informazioni sulla sicurezza
Importanti precauzioni di sicurezza
- Use only with compatible devices as specified.
- Non esporre l'adattatore ad acqua, umidità o temperature estreme.
- Evitare di far cadere o di sottoporre l'adattatore a forti urti.
- Non tentare di aprire o modificare l'adattatore.
- Scollegare l'adattatore dalla presa a muro quando non lo si utilizza o durante i temporali.
- Tenere fuori dalla portata dei bambini.
Image: Graphic illustrating the adapter's smart chip with multiple protection features: short-circuit, over-voltagee protezione da sovracorrente.
Manutenzione
Cura e conservazione
- Clean the adapter with a dry, soft cloth. Do not use liquid cleaners.
- Store the adapter in a cool, dry place away from direct sunlight.
- Avoid tightly coiling the cable to prevent damage.
Image: Diagram showing the internal copper wire and PVC jacket of the cable, highlighting the durable design and quality control.
Risoluzione dei problemi
Problemi comuni e soluzioni
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'adattatore non alimenta il dispositivo | Loose connection, faulty outlet, incompatible device | Ensure all connections are secure. Try a different wall outlet. Verify device compatibility. |
| Dispositivo non in carica | Device battery issue, adapter fault | Test the adapter with another compatible device if possible. If the issue persists, the drill's battery or charging circuit may be faulty. |
| L'adattatore è caldo | Funzionamento normale, carico eccessivo, scarsa ventilazione | A slight warmth is normal. Ensure adequate ventilation around the adapter. If it's excessively hot, discontinue use and contact support. |
Specifiche
Dettagli tecnici
| Specificazione | Dettaglio |
|---|---|
| Marca | onerbl |
| Numero di modello | 048bae53-4baa-4243-9b6e-490848237315 |
| Ingresso volumetage | CA 100-240 V, 50/60 Hz |
| Volume di uscitatage | CC 12V |
| Corrente di uscita | 3 Amps |
| Cosatage | 36.5 Watt |
| Tipo di connettore | Canna DC |
| Lunghezza del cavo | Approx. 76 inches (6.3 feet) |
| Colore | Nero |
| Materiale | Plastica |
| Dispositivi compatibili | FADAKWALT 8212, FADAKWALT 8212A DRIL 3/8'' |
Image: Diagram showing the physical dimensions of the adapter (1.6 x 2.6 x 1.2 inches) and the cable length (76 inches).
Garanzia e supporto
Informazioni sulla garanzia
This product is covered by a standard manufacturer's warranty. Please refer to the seller's return policy for specific details regarding returns and replacements. Typically, a 30-day return/replacement policy is offered.
Assistenza clienti
For any questions, concerns, or troubleshooting assistance not covered in this manual, please contact the seller directly through the platform where the product was purchased. Provide your order number and a detailed description of the issue for prompt support.